CRU Dataport DataPort 5 User manual

Rugged, Reliable, Mobile, SecureTM
1-800-260-9800 www.CRU-DataPort.com
Package Contents
1 - DataPort frame assembly
1 - DataPort carrier assembly
2 - Metal covers
4 - 6 x 32 x 3/8” flat-head screws for hard drive mounting
4 - M3 x 10mm Phillips pan-head screws for frame mounting
2 - Keys for lock
1 - Cover removal tool
Frame Installation
1. Rail Mount the Frame Assembly.
If the drive bay requires mounting rails, the rails are provided
by the case manufacturer. Install the mounting rails on the
DataPort frame according to the case manufacturer’s instruc-
tions. Slide the frame into the case and secure it.
2. Direct Mount the Frame Assembly.
Slide the frame into an open 5.25” bay in the PC case. Use the
screws included with the DataPort 5 or 5+ to secure the frame
to the PC case with the side mount screw holes.
3. Final Frame Installation.
Connect the data and power cables. Connect an unused SATA
data cable to the DataPort frame data connector and the host
bus adapter. Connect an unused ATA power cable to the power
connector on the frame.
The frame installation is now complete.
Installing a Hard Drive in a Carrier
1. Remove the covers of the DataPort 5 or 5+ carrier.
Use the provided cover removal tool to lift off the cover or slide
the covers off the back of the DataPort carrier.
2. Install the hard drive in your carrier.
Carefully connect the hard drive to the carrier board. Align
the hard drive with the side mount screw holes then use the
provided screws to secure the hard drive in position. For the
DataPort 5+ use a piece of adhesive tape to attach the TCCS
sensor (wire for regulating temperature control) to the middle
of the hard drive. Place the covers back on the DataPort 5 or 5+
carrier.
3. Insert the carrier in the frame assembly.
Slide the carrier into the frame and lock the carrier. The lock
on the DataPort 5 or 5+ serves as the power ‘ON/OFF” switch.
After the lock is engaged the green LED will illuminate when
the computer is powered on.
DataPort 5 & 5+ Serial ATA Install Guide

Rugged, Reliable, Mobile, SecureTM
1-800-260-9800 www.CRU-DataPort.com
Operation
1. Removing the Carrier
The SATA DataPort 5 and 5+ support hot swapping provided
the host bus adapter supports hot swapping. See the host bus
adapter instructions for details. CRU is not liable for the loss
of data. It is the user’s responsibility to follow the procedures
required by the host bus adapter.
2. DataPort 5 and 5+ LED Functions
The Green LED on the DataPort 5 and 5+ will light up when
the DataPort is locked and powered. The Green LED will blink
when the fan is not functioning properly. Contact CRU for as-
sistance with this issue. The Red LED is the drive activity LED,
if the hard drive supports this feature the red LED will blink to
show drive availability.
Limited Product Warranty
CRU-DataPort (CRU) warrants the DataPort 5 and 5+ to be free of
significant defects in material and workmanship for a period of
five years from the original date of purchase. CRU’s warranty is
nontransferable and is limited to the original purchaser.
Product Remedies
CRU’s entire liability and the original purchaser’s exclusive
remedy for any breach of warranty, shall be, at CRU’s option,
either (a) return of the price paid or (b) repair or replacement of
the hardware or comparable substitute as determined by CRU,
provided that the hardware is returned to CRU, with a copy of
the sales receipt or applicable documentation. Any replacement
hardware will be warranted for the remainder of the original war-
ranty period. These remedies are void if failure of the hardware
has resulted from accident, abuse, misapplication or modifica-
tion. (This will be determined by CRU).
Limitation of Liability
The warranties set forth in this agreement replace all other war-
ranties. CRU expressly disclaims all other warranties, including
but not limited to, the implied warranties of merchantability and
fitness for a particular purpose and noninfringement of third-party
rights with respect to the documentation and hardware. No CRU
dealer, agent or employee is authorized to make any modification,
extension, or addition to this warranty. In no event will CRU or
its suppliers be liable for any costs of procurement of substitute
products or services, lost profits, loss of information or data, com-
puter malfunction, or any other special, indirect, consequential,
or incidental damages arising in any way out of the sale of, use
of, or inability to use any CRU product or service, even if CRU has
been advised of the possibility of such damages. In no case shall
CRU’s liability exceed the actual money paid for the products at
issue. CRU reserves the right to make modifications and additions
to this product without notice or taking on additional liability.
Register your product at www.CRU-DataPort.com.
A5-005-0001 Rev. 3.1