Crux RVCMB-78E User manual

-Rear-view camera input.
-Front-view camera input.
-Provides three AV Inputs.
-Front-view camera and AV Inputs can still be used even if vehicle is equipped with an
OEM rear view camera.
-With OE type Dynamic Parking Guidelines.
-Toggle AV inputs from Comand knob, wireless remote control or wired push button
switch provided.
-On-screen display and setup.
Mercedes Benz
2016 - 2017
E Class
- Works on Mercedes Benz E Class with NTG5.5 systems and 12.3” or 8.4” screens.
12.3” Screen 8.4” Screen
1 / 10
rev.012217

POWER Harness RGB Cable
RGBCable
AV Harness IRCable
Remote Control
CAN IN/OUT Cable
CAP Touch Cable Selector Button
IR OUT Cable
Uart Touch Cable
TOUCH IN Cable
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
Parts Included
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION
2 / 10 rev.012217
RVCMB-78E
Rear View Integration for
MERCEDES BENZ E CLASS NTG5.5
R

F
C
A
M
1
2
V
F
C
A
M
R
C
A
M
G
N
D
R
C
A
M
1
2
V
R
C
A
M
F
C
A
M
G
N
D
V
I
N
1
V
I
N
2
V
I
N
3
Mode button
A
R
1
A
L
1
A
R
2
A
L
2
A
O
U
T
L
A
O
U
T
R
R
E
A
R
S
A
F
E
REAR
CANERA FRONT CANERA
IRcable
OEMcable
CANIN/ OUTcable
CAN2USB Connect CAN2USBto
useOEM touch pad
CAN2USB
Powercable
Removewhite OEM
connector and connect it to
whiteCAN2USBconnector
OEM
connector
Capacitivetouch screen
connection
Powercable
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
Wiring Diagram
3 / 10 rev.012217
RGB
Navigation
(Not Included)
R
RVCMB-78E
Rear View Integration Interface for
MERCEDES BENZ E CLASS NTG5.5
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

Find the beige colored connector
behind the comand
Remove the right wire from the beige
color connector and connect it to
Fakra adapter
Then, connect Fakra adapter to LVDS
out of the interface
Connect the supplied LVDS IN wire to the
right side of beige color connector.
Then, another side of connector shall be
connected to the LVDS IN of the interface
OEM
LVDS IN Cable
12.3 inch monitor command
8.4inch monitor command
Fakra adapter
In Case of 8.4”,
Please remove the left
wire
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
4 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION
Installation

Unplug the Quadlock connector
behind the radio
Remove the black connector
from the cover
Connect the OEM connector
to the supplied CAN IN/OUT
Remove the black connector
marked with red circle above
Put the black connector cover
onto the supplied CAN IN/OUT
cable
Reconnect the supplied cable
where the black connector
was removed
GROUND
B+
Connect the black ground wire of
the supplied power cable to
the brown OEM wire
Connect the red B+ wire of
the supplied power cable to
the orange/blue OEM wire
POWER Connection
CAN Connection
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
5 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

ON : DOWN / OFF : UP
PIN Function Dip S/W
1 RGB INPUT OFF : RGB OFF
ON : RGB ON
2 AV1 MODE OFF : AV1 ON
ON : AV1 OFF
3 AV2 MODE OFF : AV2 ON
ON : AV2 OFF
4 AV3 MODE OFF : AV3 ON
ON : AV3 OFF
5 MONITOR SIZE OFF : 12.3 inch
ON : 8.4 inch
7 REAR CAMERA OFF : OEM REAR CAMERA
ON : AFTERMARKER REAR CAMERA
8 NO FUNCTION (SET TO OFF)
KEY FUNCTION
POWER & PIP NO FUNCTION
MENU Activate FACTORY MENU
OK Make a selection, change image display
▲UP
▼DOWN
LEFT
(Press this button for 2 seconds to access the
factory mode.)
RIGHT
(Press this button for 2 seconds to reset all the
user settings.)
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
Disconnect Power Harness before changing the DIP Switch settings.
▼
▼
DIP Switch Settings
Remote Control
6 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

Adjust current screen position and size
PAS TYPE : Select type of parking guide line
- NOT USED: No use parking guide line
- PAS ON: Selecting Dynamic parking guide line
- PAS OFF Selecting fixed parking guide line
PAS SETUP: Adjusting the position of the parking guide line
REAR TYPE: Choose rear camera recognition.
- CAN: By connecting to “CAN” wires of the car gear, changing to
rear camera mode when shifting into reverse. (Connect “CAN”
cable of the power cable to the “CAN” cable of the car gear.)
- LAMP: By connecting to the reerse light of the car, switch to rear
camera mode when shifting into rear. (Connect “Rear-C” cable of
the power cable to the rear lamp of the car.)
SAFE ENABLE: If enabled, HDMI, RGB, and A/V mode will not show up
while driving. (Default: OFF)
RADAR ENABLE: Setting up parking distance alarm sensor. (ON/OFF)
F-CAM ENABLE: Front camera setting
- OEM CAMERA : Select OEM front camera
- EXT CAMERA : Select aftermarket front camera
- NOT USED
<H-POSITION> <V-POSITION>
Adjust rear view camera setting.
H-POSITION : Move display horizontally
V-POSITION : Move display vertically
H-SIZE(NAVI) : Adjust the size of navigation
display horizontally
IMAGE
PARK
UTIL1
UTIL2
INFO
H- POSITION
V- POSITION
H- SIZE(NAVI)
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
PAS TYPE
PAS SETUP
REAR TYPE
SAFE ENABLE
RADAR ENABLE
F- CAM ENABLE
Menu of FACTORY
MENU to Return SEL to Select/Save
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
7 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

Navigation & Car model set up
NAVI MODEL : Choose RGB navigation
AVOUT SELECT :Selecting background sound
through car AUX.
FACTORY RESET: Reset FACTORY setting
Other options setting up
I-DRV REMOTE: Able to use remote control on
DVD, DTV by selecting “User”
after IR memory registered.
(Default, User)
I-DRV CONTROL: Selecting whether or not to use
touch function
IR MEMORY : Enter Remote values of DTV, DVD
Refer to IR manual for IR settings
CALIBRATE: Activate Touch calibration
Check the version number
IMAGE
PARK
UTIL1
UTIL2
INFO
NAVI MODEL
AVOUT SELECT
FACTORY RESET
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
I- DRV REMOTE
I- DRV CONTROL
IR MEMORY
CALIBRATE
Menu of FACTORY
MENU to Return SEL to Select/Save
IMAGE
PARK
UTIL1
UTIL2
INFO
SYSTEM VERSION
(MAIN - 130723)
(TRIP - 130723)
Menu of FACTORY
MENU to Return SEL to Select/Save
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
8 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

How to switch modes or activate the functions
NAVI button
Long press : Switch mode
Short press: Back to OEM mode
BACK(HOME) button on the wheel :
Long press : Switch mode
Short press : Back to OEM mode
BACK button
Long press: Switch mode
Short press: Back to OEM mode
Using the Factory Buttons
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
9 / 10 rev.012217
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION

Monitor Comand Knob
Direction Mode Push Comand Knob Mode
12.3inch Rear, Front
Camera mode Short
Full Screen→ OEM
CAM+AFTERMARKET CAM
8inch
Rear, Front
Camera mode
Short
Full Screen→ OEM
CAM+AFTERMARKET CAM
1. Image size setting
2. DVD, DTV OSD control
( OSD control remote will appear if the joy shuttle is moved to the left
for a short time in DVD, DTV mode)
Monitor Direction Mode Movement
12.3inch /
8.4 inch DVD DTV
Short UP,DOWN,LEFT,RIGHT
Long Select
Crux Interfacing Solutions
www.cruxinterfacing.com tel. #: [phone]
fax #: [phone]
10 / 10 rev.012217
Push
Comand Knob
Rear-View Integration Interface with Dynamic Parking Guide Lines
for MERCEDES BENZ E Class with NTG5.5 Systems
RVCMB-78E
Sightline
REAR-VIEW INTEGRATION