
Welcome To Your New World of Better Living with Culligan Water.
Congratulations on selecting the Aquasential™ Select Plus Series™ & Select Series™ Water Filtration System� With
Culligan’s many years of knowledge and experience in water treatment, you can be confident that the model you selected
has been designed and engineered to provide years of service with a minimum of care and attention�
If this is your first experience having filtered water in your home, you’ll love the amazing difference it makes� We promise
that you’ll never want to be without it again�
The Culligan Aquasential Select Plus Series & Select Series Water Filtration System is designed to meet the needs
of applications for high quality water� This manual contains important information about the unit, including information
needed for installation, operating, and maintenance procedures� A troubleshooting section provides a guide for quick and
accurate problem solving�
This manual is based on information available at the time it was finalized, approved, and published� Continuing design
refinement could cause changes that may not be included in this publication�
Your local independently operated Culligan dealer employs trained service and maintenance personnel who are
experienced in the installation, function and repair of Culligan equipment�
NSF/ANSI Standard 372, CSA B483�1, and NSF/ANSI Standard 42 for the effective reduction of aesthetic
substantiated by test data�
ANSI Standard 372, CSA B483�1, and NSF/ANSI Standard 42 for the effective reduction of aesthetic
Chlorine Taste and Odor up to 180,000 gallons as verified and substantiated by test data�
substantiated by test data�
substantiated by test data�
372, CSA B483�1, and NSF/ANSI/CAN Standard 61 for material safety requirement only� Not certified for contaminant
372, CSA B483�1, and NSF/ANSI/CAN Standard 61 for material safety requirement only� Not certified for contaminant
Standard 372, CSA B483�1, and NSF/ANSI Standard 42 for the effective reduction of iron for 10" up to 1,100 gallons and 12"
up to 1,600 gallons as verified ans substantiated by test data�
NSF/ANSI Standard 372, CSA B483�1, and NSF/ANSI/CAN Standard 61 for material safety requirement only� Not certified
NSF/ANSI Standard 372, CSA B483�1, and NSF/ANSI/CAN Standard 61 for material safety requirement only� Not certified
Products manufactured and marketed by Culligan International Company (Culligan) and its affiliates are protected
by patents issued or pending in the United States and other countries� Culligan reserves the right to change the
specifications referred to in this literature at any time, without prior notice� Culligan, Cullar, Filtr-Cleer, Cullneu, AccuSoft,
Culligan Man and www�culligan�com are trademarks of Culligan International Company or its affiliates�
Licensed plumbers know that standard industry procedures include only to hand tighten or use strap wrenches on plastic
parts� Plastic piping systems must be installed, operated and maintained in accordance with accepted standards and
procedures� Not adhering to the recommended service/maintenance can cause damage to equipment or property damage�
601040677 B 07/21
Thank You!