Cult 5056272006542 User manual

Allen Bolt 6 x 45 mm
* Save all packing until finished.
*Read Instructions, cover to cover.
*Have 2 adults on hand for assembly.
2
Page 2
D
4
H2
H1
1
C
2
Leg
B
Side Board Body
Assembly Prep
Qty
PictureLabel
Component List
A 1
PictureLabel QtyDescription
Hardware List
Before Beginning:
Marble Top
Shelves
Description
Shelf Pin 8
T1
PictureLabel
Tool List
Qty
1
Description
Allen Key 4mm
Allen Bolt 6 x 30 mm 4
H4
H3
Washer 25x8mm 4

Step 2
B
B
A
Step 1
A
Assembly Steps
T1
H1
H1
Page 3
C
Unpack the Mable Top (C) from box. With the help of two person lift the Marble Top (C)
and align it on the Cabinet Frame (A) from the back as shown above. Slide the Marble Top
(C) until it meets the back frame. Hold the front edge of Marble Top (C) with one hand and
place the other hand under the Marble Top (C) as shown. Place Marble Top (C) gently
inside the frame. Adjust Marble Top (C) to maintain equal gap from Cabinet Body (A). If
Marble Top is not inserted carefully, it may damage product surface.
Place Cabinet Body (A) upside down on a non-damaging padded surface. To attach Legs, align
holes of Leg (B) with Side Board Body (A) as shown above, Insert Allen Bolt (H1) and tighten it
with Allen Key (T1) . Follow the same process to attach other Leg.Turn the piece in upright
position.
Careful : Extremely heavy product.
(A+B)
Note : - If Marble Top is not inserted carefully, it may damage product surface.

Step 3
Page 4
C
A
H4
H3
T1
H3
H4
T1
Remove the 2 drawers (First and Second) and open the doors of sideboard as shown in
image. Align the holes on top frame and holes underside of Marble Top (C) and secure
holes using Allen Bolt (H3) and Flat Washer (H4) and fully tighten using Allen Key (T1).

Assembled View
H2
D
Step 4
Page 5
Open the door and fix the Shelf Pin (H2) in the desired holes and place The Wood Shelf (C)
on Shelf Pin as shown above in the drawing. Follow the same process to place the other
shelf. Product is ready to use.
Product assembly is now complete and product is ready to use.