Cult Ava 5056315930193 User manual

Page 1
ASSEMBLY INSTRUCTIONS
DINING TABLE
5056315930193
5056315930209

Label Picture Qty
ATable Top 01
BBase 02
Assembly Prep
Before Beginning
*Save all packing until finished.
*Read Instructions, cover to cover.
*Have 2 adults on hand for assembly.
Components List
H 1 08
08
Hardware List
Description
Spanner 01
Tool List
Page 2
H 2
T 1
Label Picture QtyDescription
Label Picture QtyDescription
Hexa Bolt
M8 x 25 mm
Flat Washer
M8 x 25 mm

STEP 1: .
Assembly Step
Page 3
B
A
Note:Self adhesive Buffer provided if required.
STEP 2:
Careful: Extremely Heavy Product.
Place Top (A) upside down on a non-damaging padded surface. Position first Leg (B) to the under- side
of the Top ensuring Leg holes are aligned with holes at the underside of the Top. Secure the connection
using 4 Bolts (H1) and Flat Washers (H2) and tighten using Spanner. Repeat the same step to assemble
other Leg (B).
Turn the Dining Table in upright position. Assembly is complete and the Product is ready to use.
Note: x6 Self adhesive buffers have been provide inside the hardware kit. Peel of the backing and
stick to the leg base if required.
A

Caring for your furniture
Please do not use abrasive cleaners or silicone-based products on your furniture as this could damage or alter the surface.
We recommend a good quality soft beeswax using a soft cloth to apply the wax in small circles. With a new soft cloth buff
the surface following the grain direction. Avoid the yellow duster type as these can leave fibers.
Always use mats and coasters with cork/felt backing when placing hot items onto the surface of your product. Avoid mats
and coasters with plastic/rubber backs/feet they can leave un-reversible marks on your furniture surface over time.
Any liquid spilled onto the item should be cleaned up immediately using an absorbent cloth. Alcohol or spirit-based liquids
including nail polish remover and perfumes will seriously damage a lacquered surface even if left for a short amount of time
and needsto be wiped immediately. Please ensure the surface is completely dry. A glass top is advisable for dressing
tables.
Never use sharp items on the surface of the product; knives and utensils may damage the timber. It is advisable to place a
mat under paper when writing.
Never overload an item such as a shelf that may be beyond what the shelf is reasonably expected to hold.
Please do not sit or place an amount of weight onto the edge of a tabletop as this may cause the table to tip.
Never attempt to lift heavy furniture on your own, always seek assistance and where ever possible please dismantle any
heavy items before moving them to a new location.
Please periodically tighten bolts and screws on all self-assembly items, as these may work loose over time.
Your furniture will endure most temperatures in your home, but it is recommended that placing it next to a heat source such
as a fire or radiator is avoided. This is particularly recommended with solid timbers as the heat may cause the timber to
warp, crack or split.
Exposer to direct sunlight may cause slight color change, Acacia for instance may mellow with a pinkish hue.
Note : This furniture is intended for indoor use only.
"WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU WITH YEARS OF ENJOYMENT IN YOUR HOME"
Page 4