Cult Mater Bowl Table User manual

@materdesign
www.materdesign.com
Considering the planet,
its resources and its people.
Bowl Table, Medium
Designed by Ayush Kasliwal
Thank you for purchasing the Bowl Table

Bowl Table Waste Edition, Medium
Designed by
Ayush Kasliwal
Dimensions
Ø 46 cm H 52 cm / Ø 18.1” H 20.5”
Weight
6,2 kg / 13,7 lbs
Gliders
Hard plastic gliders installed as
standard
Materials
Coeebean shells from BKI’s coee
roasting process mixed with upcycled
industrial plastic waste from GROHE.
Black powder coated steel legs
Finish
Coee Waste Black, Coee Waste Light,
Grey Waste
Maintenance guide
Please note that the bowl is handcrafted and made from nature fibers, and plastic waste -
minor blemishes and imperfections may be visible. These are not considered defects and do
not interfere with the quality and function of the product. Always remove stains quickly
before they can do any permanent damage to the furniture. When you move your furniture
make sure you lift it rather than pulling or pushing it to avoid damaging the floor, legs and
mountings. Avoid improper use such as tilting, putting your feet on the furniture or stan-
ding on it. Be careful not to damage or scratch the surface with sharp objects. Minor spots of
rust under the furniture and bases are considered as a natural result of general use.
Cleaning
Wipe with a clean cloth wrung in water or in a solution of water and a neutral detergent.
Remove soap residue immediately using a clean dry cloth. Avoid using scouring cream or
scouring pads, as they may scratch the surface. Minor scratches or damage to the powder
coated surfaces can lead to corrosion. The life expectancy of your furniture will vary depen-
ding on the type of use.
Coee or wood waste mixed with upcycled industrial plastic
Assembly instructions
Components
Made from upcycled industrial waste
Bowl Table is the result of a new innovative waste-to-value technique developed by Mater,
that enables us to upcycle companies’industrial waste. The plastic waste from GROHE is
mixed with coee shells from BKI coee - one of Denmarks largest coee manufacturers or
wood waste collected from the construction of wooden furniture from KVIST.
1 x Top panel 3 x Legs
tabletop
Carefully position table top upside down onto clean, padded surface. Insert threaded studs of
each leg into corresponding holes of the table top. Turn each leg clockwise to secure.