Cult Monique 5059413403835 User manual

ASSEMBLY INSTRUCTIONS
CONSOLE TABLE
Page 1
5059413403835

Component List
Part
A
Hardware List
Part
H1
Picture Descripon
Top
Qty
1
Picture Descripon
Allen Bolt
12x6 mm
Qty
16
Part
T1
Picture Descripon
Allen Key
4 mm
Qty
1
Assembly Prep
Before Beginning
*Save all packing unl finished.
*Read Instrucons, cover to cover.
*Have 2 adults on hand for assembly.
Tool List
Page 2
B Leg Frame 2
C1
Leg Connector
H2 Washer
16x6 mm 16

Assembly Steps
Step 1
Step 2
Page 3
C
B
A
T1
H1
B
C
T1
H1
Turn the Top (A) upside down on a padded non-damaging surface. Gently
insert Leg Frame (B) into the hole of pre-fixed metal tube underneath the Top
(A) as illustrated. Align the holes on the metal tube underneath the Top (A)
with pre-threaded holes on the Leg Frame (B) and secure using Allen Bolt (H1)
and Washer (H2) with the help of Allen Key (T1). Now insert the Leg Connector
(C) on to the protruded metal bush of Leg Frame (B) ensuring the holes on the
Leg and Leg connector are align. Secure connecon using Allen Bolt (H1) and
Washer (H2) with help of Allen Key (T1). Do not fully ghten all connecon yet.
Repeat step-1 to assemble other Leg Frame (B). Fully ghten all connecons
using Allen Key (T1) as illustrated above.
H2
H2
D
D
B
B
A
A
C
C
D
D
B
B
A
C
C
A
A

Assembly Steps
Assembly is complete and the product is ready to use.
Page 4
Pre-fied levellers can be used for adjustment if needed
Step 3

HARDLINE FURNITURE (NOT UPHOLSTERY)
Safety Instructions
Never drag furniture when moving it, always lift it.
When lifting or moving a table always do so from under frame and not the table top.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by incorrectly
insalled or assembled furniture.
It is recommended that before moving heavy objects to a new location they are completely dis-
assembled to avoid personal injury or damage to the furniture. Please be careful to retain all
fittings when doing this.
IMPORTANT: If an Anti-topple device is included with this unit, you must install it in accordance
with the instructions provided using fixings suitable for the wall type. If unsure, please seek
advice of a professional.
Care and Maintenance
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
How to care for Wood furniture (unpainted)
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help
maintain its luster.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s
surface by building up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills
immediately and ensure that a mat or pad is placed under paper if you are writing.
Page 5

Extendable dining tables should be left extended for the first few months to avoid an uneven
appearance. Likewise, lamps and ornaments should also be moved regularly.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture
next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack
of humidity caused by central heating can cause damage such as warping.
How to care for Painted Wood furniture
Hand painted brush stroke finish's will hold up to everyday wear and tear quite nicely. However,
it is important to remember that your piece is still a wood piece of furniture and should be cared
for as such.
Painted furniture still requires regular dusting with a damp cloth. When very soiled wash with a
solution of mild, non-abrasive detergent and warm water. Wring a cloth nearly dry and work on a
small section at a time, then rinse with clear water drying after..
Never leave water to settle on the surface as this will cause damage. Any liquid spilled onto the
item should be cleaned up immediately using an absorbent cloth.
AVOID chemical cleaners or liquid furniture polish including direct contact with greasy
substances
As with all natural wood products, there will be some movement within the parts as the furniture
acclimatises to its surroundings, you may see slight chipping and cracks where panels meet,
this is a completely natural occurrence with ALL painted products using natural solid timbers.
Painted surfaces can be carefully touched up with matching paint.
There will be various brush lines, slubs, and little inconsistencies in the painted finish, this is all
part of the relaxed handfinished look and feel of hand painted collections.
How to care for Glass furniture
If the product component is chipped or broken, please consult the manufacturer, retailer or
agent with regard to obtaining a manufacturing specification and shape for replacement glass
quoting the model number and batch number.
Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed objects.
Do not sit or stand on horizontal glass surfaces.
Do not place very hot or very cold items against or in close proximity to glass surface(s).
The surface should be protected with coasters, trivets or placemats.
All spills should be blotted up immediately. Do not wipe the spill or this may spread it. Clean the
surface with a clean soft cloth (non-abrasive) and mild detergent or stone soap.
Page 4
Page 6

How to care for Metal furniture
Metal furniture requires minimal maintenance:
Cleaning your metal furniture is very simple. Use a soft cotton cloth and clean with mild
detergent or water, using a towel immediately dry the furniture afterwards.
Metal furniture is usually damaged due to rust, as a precaution a soft wax after cleaning will help
seal it.
If it has a few spots of rust, you can treat it with rust remover, following the manufacturers
guidelines. (some finishes are made to look like rust)
Smudges and smears can be removed from metal furniture by using a window cleaner and a
paper towel.
Indoor metal furniture is not recommended for outdoor use.
How to care for Marble furniture
The surface should be protected with coasters, trivets or placemats.
All spills should be blotted up immediately, do not wipe the spill as this may make it spread.
Clean the surface with a clean soft cloth (non-abrasive) and mild detergent or stone soap. Do
not use cleaners containing acids.
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Page 7