CyberData 011527 User manual

CyberData InformaCast Enabled WiFi Alert
Button Setup Guide
Document Part # 931822B
CyberData Corporation
3 Justin Court
Monterey, CA 93940
[phone]

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 1
CyberData InformaCast Enabled WiFi Button Setup Guide
Document# 931822B
COPYRIGHT NOTICE:
© 2021, CyberData Corporation, ALL RIGHTS RESERVED.
This configuration guide and related materials are the copyrighted property of CyberData
Corporation. No part of this configuration guide or related materials may be reproduced or
transmitted, in any form or by any means (except for internal use by licensed customers), without
prior express written permission of CyberData Corporation. This configuration guide, and the
products, software, firmware, and/or hardware described in this configuration guide are the
property of CyberData Corporation, provided under the terms of an agreement between
CyberData Corporation and recipient of this configuration guide, and their use is subject to that
agreement and its terms.
DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by
CyberData Corporation, CyberData Corporation makes no representation or warranty, express or
implied, including any warranty or merchantability or fitness for any purpose, with respect to this
configuration guide or the products, software, firmware, and/or hardware described herein, and
CyberData Corporation assumes no liability for damages or claims resulting from any use of this
configuration guide or such products, software, firmware, and/or hardware. CyberData
Corporation reserves the right to make changes, without notice, to this configuration guide and to
any such product, software, firmware, and/or hardware.
OPEN SOURCE STATEMENT: Certain software components included in CyberData products
are subject to the GNU General Public License (GPL) and Lesser GNU General Public License
(LGPL) “open source” or “free software” licenses. Some of this Open Source Software may be
owned by third parties. Open Source Software is not subject to the terms and conditions of the
CyberData COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and
distribute any Open Source Software is determined by the terms of the GPL, LGPL, or third
party, according to who licenses that software. Software or firmware developed by CyberData
that is unrelated to Open Source Software is copyrighted by CyberData, subject to the terms of
CyberData licenses, and may not be copied, modified, reverse-engineered, or otherwise altered
without explicit written permission from CyberData Corporation.
TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are
trademarks of CyberData Corporation. Other product names, trademarks, and service marks may
be the trademarks or registered trademarks of their respective owners.

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 2
Revision Information
•1-7-21 Initial Release
•2-25-21 Update to network configuration.

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 3
Table of Contents
Table of Contents............................................................................................................................ 3
1.0 Preparing the Environment....................................................................................................... 4
2.0 Installing the Tool..................................................................................................................... 4
2.1 Installing the FTDI driver................................................................................................... 10
3.0 Using the Tool......................................................................................................................... 12
3.1 Button Explanations............................................................................................................ 13
3.3.1 Edit Button Configuration................................................................................................ 14
3.3.2. SNMP Servers................................................................................................................. 15
3.3.3 Buzzer and LED Behavior............................................................................................... 16
3.3.4 System Event Log............................................................................................................ 18
4.0 Setting up SNMP on InformaCast .......................................................................................... 19
4.1 Creating the M2M relay.......................................................................................................... 19
5.0 Contact CyberData Corporation ............................................................................................. 23

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 4
1.0 Preparing the Environment
The CyberData InformaCast Enabled WiFi Button is used to trigger a message through
InformaCast with a simple button press. The button does not register to InformaCast like a
typical InformaCast enabled device, but it does interact with the server.
To properly use the buttons CyberData recommends having already setup the InformaCast
Server, Speaker groups, and Service Location Protocol (SLP). The button uses SLP to discover
the server which allows for a faster deployment. If using SLP is not possible on the network, the
WiFi Button Utility allows the InformaCast Server to be set using the SNMP button.
The WiFi buttons will require the ability to contact the InformaCast server. This requires the
WiFi Access points the buttons connect to have the ability to communicate with the InformaCast
Server.
2.0 Installing the Tool
This section will walk through the setup of the CyberData Wifi Button Utility. This tool is
designed to setup and manage the buttons.
1. Download and unzip the CyberData WiFi Button Utility.
2. Double click on the wb_installer.exe file to start the installation.
3. Once you have the Installer Setup Wizard window, press Next to begin.
Figure 2-1. Installer Setup Welcome

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 5
4. Confirm the installation location or press the Browse button to select a new install
location.
5. Press Next to continue.
Figure 2-2. Select Install Location

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 6
6. Check the box for “WiFi Button Utility”.
7. Press Next to continue.
Figure 2-3. Pick Utility to Install

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 7
8. Read and Agree to the License Agreement.
9. Press Next to continue.
Figure 2-4. License Agreement

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 8
10. Set the start menu shortcut location.
11. Press next to continue.
Figure 2-5. Start Menu Shortcuts

CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
CYBERDATA INFORMACAST ENABLED WIFI BUTTON SETUP GUIDE
Doc. 931822B Page 9
12. The utility is ready to be installed, press the Install button to begin installation.
Figure 2-6. Ready to Install
13. Once the install is complete, press the Finish button.
Figure 2-7. Installation Complete