CYP CLUX-H2SDIA User manual

CLUX-H2SDIA
HDMI to 3G SDI Converter
OPERATIONS MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VS1 23/02/12 First Release

CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel .................................................. 8
6.2 Rear Panel ..................................................... 9
7. Connection Diagram .......................... 10
8. Specications ...................................... 11
9. Acronyms ............................................. 12

6
1. INTRODUCTION
The CLUX-H2SDIA device is a HDMI to SDI converter which allows HDMI
signals to be converted and shown on SDI displays. It utilises high bit-rate
processing at 2.970 Gbps which ensures signal transmission without loss
of quality. In addition, the external audio input allows the user to insert
the audio from a dierent audio source instead of the HDMI audio on the
SDI output.
2. APPLICATIONS
• Smart Home/Luxury House
• Smart Building or any Smart AV Installation System
• HDMI signal conversion to 3G-SDI display
3. PACKAGE CONTENTS
• HDMI to 3G-SDI Converter
• 5V/2.6A DC power adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI source equipment with HDMI cable and output SDI
monitor with SDI cable.

7
5. FEATURES
• Operation at 2.970 Gbps, 2.970/1.001 Gbps, 1.485 Gbps, 1.485/1.001
Gbps and 270 Mbps
• Integrated audio de-embedding for a maximum of 8 channels of 48 kHz
audio
• Automatic video mode detection (3G/SD/HD)
• Connect using the SDI to HDMI converter (CLUX-SDI2HCA) to extend
your signal over long distances
• Converts HDMI signal to SDI: 480i/576i SD-SDI (SMPTE 259M-C, at
bitrates of 270 Mbit/s)
• 720p/1080i  HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or
1.485/1.001 Gbit/s)
• 1080p  3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
• Supports HDMI input timings: 480i, 576i, 720p@50/59.94/60,
1080i@50/59.94/60, [email protected]/24/25/29.97/30/50/59.94/60
• Supports SDI output distance up to 100m (3G-SDI), 200m (HD-SDI), or
300m (SD-SDI)
• Note: Cable tested with Belden 1694A. Operating distance may vary if
used with another type of cable.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
AUDIO IN
AUDIO
SW
HDMI IN
EXT. INT.
HDMI to 3G SDI CLUX-H2SDIA
1 2 3
• 1 AUDIO IN
• Connect to the audio source equipment (such as DVD player) with
3.5 mm phone jack for audio signal input.
• 2 AUDIO SW
• This switch allows the user to choose between audio sources. Switch
between the external (EXT) audio input (3.5 mm phone jack) or the
internal (INT) audio from the HDMI input.
• 3 HDMI IN
• Connect this port to the HDMI input source such as HD camera or PC
with a HDMI cable.
Note: When the HDMI input source signal has HDCP content the SDI output
will not display any image.

9
6.2 Rear Panel
POWER
LOCK
SDI OUT
DC 5V
1 432
• 1 DC 5 V
• Plug the 5 V DC power supply into the unit and connect the adaptor to
AC wall outlet.
• 2 POWER LED
This blue LED will illuminate when the device is connected to the power
supply.
• 3 LOCK LED
• This yellow LED will illuminate when both input HDMI source and SDI
output display has successfully sent and received the signal.
• 4 SDI OUT
• Connect to the SDI output display.

10
7. CONNECTION DIAGRAM
AUDIO IN
AUDIO
SW
HDMI IN
EXT. INT.
HDMI to 3G SDI CLUX-H2SDIA
POWER
LOCK
SDI OUT
DC 5V

11
8. SPECIFICATIONS
Operation Data 2.970 Gbps, 2.970/1.001 Gbps, 1.485 Gbps,
1.485/1.001 Gbps, and 270 Mbps
Frequency Bandwidth 225 MHz/link (HDMI 1.3)
Input Port 1×HDMI, 1×3.5mm Phone Jack
OUTPUT PORT 1×BNC (SD-SDI/HD-SDI/3G-SDI)
SDI Video Supports SD-SDI: 480i, 576i,
HD-SDI: 720p@50/60,1080i@50/60,
[email protected]/24/25/29.97/30
3G-SDI: 1080p@50/60
HDMI Cable Distance 10 m
Audio Input Support Internal: PCM 2/5.1/7.1CH
External: Analog L/R
ESD Protection Human body model:
±8 kV (Air-gap discharge)
±4 kV (Contact discharge)
Power Supply 5V/2.6 A DC (US/EU standards,
CE/FCC/UL certied)
SDI Cable Distance 3G up to 100m (BELDEN 1694A Cable)
HD up to 200m (BELDEN 1694A Cable)
SD up to 300m (BELDEN 1694A Cable)
Dimensions 78.5 mm (W) × 124 mm (D) × 30 mm (H)
Weight 198 g
Chassis Material Aluminum
Silkscreen Color Silver
Power Consumption 5 W
Operating Temperature 0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature −20ºC~60ºC/−4 ºF~140 ºF
Relative Humidity 20~90 % RH (non-condensing)

12
9. ACRONYMS
ACRONYM COMPLETE TERM
3G Bandwidth 2.97 Gbps≈3G
SDI Serial Digital Interface

13

14

15

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com