CYP CLUX-SDI2DVIA User manual

CLUX-SDI2DVIA
3G-SDI to DVI Converter with External Audio
OPERATIONS MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VS1 25/11/2011 First release
VR2 12/03/2012 Add Support Timings

CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel ................................................... 8
6.2 Rear Panel ..................................................... 9
7. Connection Diagram .......................... 10
7. Connection Diagram .......................... 10
8. Specications ...................................... 11
9. Acronyms ............................................. 12

6
1. INTRODUCTION
The CLUX-SDI2DVIA SDI to DVI Converter allows SD, HD and 3G-SDI
signals to be shown on DVI display. This means that it is now easier for
professionals to distribute and extend their SDI signals for connection to a
DVI display. Additionally, the built-in stereo Audio Out will allow the user
to enjoy perfectly synchronized video and audio.
2. APPLICATIONS
Smart Home/Luxury House
Smart building or any Smart AV Installation System
Converting a 3G SDI camera signal to DVI signal
3. PACKAGE CONTENTS
3G SDI to DVI Converter
5V/2.6A DC power adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Input SDI source equipment with SDI cable and output DVI monitor
with DVI cable.

7
5. FEATURES
Supports SD-SDI, HD-SDI and 3G-SDI input signals with auto-detection
SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,
1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s
Supports SDI output distance up to 100m (3G-SDI), 200m (HD-SDI), or
300m (SD-SDI)
Converts SDI signal to HDMI: SD-SDI (SMPTE 259M-C) → 480i/576i
HD-SDI (SMPTE 292M) → 720p@50/59.94/60, 1080i@50/59.94/60
3G-SDI (SMPTE 424M/425M-AB) → [email protected]/24/25/29.97/30/50
/59.94/60, [email protected]/24/25/29.97/30
Supports SDI input modes: SD-SDI (SMPTE 259M-C, at bitrates of 270
Mbit/s)
HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s and 1.485/1.001 Gbit/s)
3G-SDI (SMPTE 424M/425M-AB, at bitrates of 2.970 Gbit/s and
2.970/1.001 Gbit/s)
Note: Unit tested with Belden 1694A cable, using cables of another
specication may result in a dierent operating distance.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
LOCK
SDI IN
DC 5V
1
2
3 4
1
DC 5V
Plug the 5 V DC power supply into the unit and connect the adaptor to
an AC wall outlet.
2
POWER LED
The blue LED will illuminate when the device is connected to the
power supply.
3
LOCK LED
This yellow LED will illuminate when both input SDI source and output
DVI display has sent and received the signal.
4
SDI IN
This slot is where you connect the SDI source equipment for sending
the signal to the display screen.

9
6.2 Rear Panel
AUDIO OUT DVI OUT / HD TIMING
3G SDI to DVI CLUX-SDI2DVIA
21
1
AUDIO OUT (3.5 mm jack)
Connects to a TV or amplier with audio input (stereo only).
Note: Multichannel sound will be down-mixed to stereo only for output
from the unit's audio output.
2
DVI OUT / HD TIMING
Connects to a TV or monitor with DVI input.
Note: The DVI equipped display must be able to support HD resolutions
and timings to be compatible.

10
7. CONNECTION DIAGRAM
HD-SDI Source
e.g. SDI Camera
SDI Cable
DVI Cable
3.5 mm Cable
Ampiler TV or Monitor
POWER
LOCK
SDI IN
DC 5V
AUDIO OUT DVI OUT / HD TIMING
3G SDI to DVI CLUX-SDI2DVIA

11
8. SPECIFICATIONS
SDI Transmission Rates 2.970 Gbps, 2.970/1.001 Gbps, 1.485 Gbps,
1.485/1.001 Gbps, and 270 Mbps
Video Bandwidth 225 MHz/6.75Gbps
Input Port 1× BNC (SD-SDI/HD-SDI/3G-SDI)
Output Port 1× DVI, 1× 3.5 mm Phone Jack
SDI Input Supports 480i, 576i, 720p@50/59.94/60,
1080i@50/59.94/60,
[email protected]/24/25/29.97/30/50/59.94/60
1080PsF@25/29.97/30
DVI Output Supports 480i, 576i, 720p@50/59.94/60,
1080i@50/59.94/60,
[email protected]/24/25/29.97/30/50/59.94/60
ESD Protection Human body model: ± 8 kV (air-gap discharge)
±4 kV (contact discharge)
Power Supply 5 V DC/ 2.6 A
(US/EU standards, CE/FCC/UL certied)
SDI Cable Distance 3G up to 100 m (BELDEN 1694A Cable)
HD up to 200 m (BELDEN 1694A Cable)
SD up to 300 m (BELDEN 1694A Cable)
Dimensions 78.5 mm (W) × 124 mm (D) × 30 mm (H)
Weight 194 g
Chassis Material Aluminum
Silkscreen Colour Silver
Power Consumption 4 W
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C / −4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)

12
9. ACRONYMS
ACRONYM COMPLETE TERM
3G Bandwidth 2.97Gbps ≈ 3G
SDI Serial Digital Interface

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com