CYP CPRO-3D41GAME User manual

CPRO-3D41GAME
4×1 HDMI Switcher
Operation Manual
Operation Manual


DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 07/04/10 Preliminary Release
VS1 22/04/13 Updated format/diagrams

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Top Panel ...........................................3
6.2 Front Panel.........................................3
6.3 Left Panel ...........................................4
6.4 Right Panel.........................................4
6.5 Rear Panel .........................................5
6.6 Remote Control.................................5
7. OSD Menu .............................................. 6
7.1 Entering the Menu ............................6
7.2 System Info.........................................6
7.3 Sink EDID.............................................7
7.4 Source Infoframe ..............................7
7.5 Input Select........................................7
7.6 Audio Return......................................8
7.7 Exit.......................................................8
8. Connection Diagram ............................ 9
9. Specications ...................................... 10
10. Acronyms ........................................... 10

1
1. INTRODUCTION
This 4×1 HDMI Switcher is a high performance four-input & one-output
High-Denition Multimedia Interface (HDMI) switcher with Audio
Channel Return (ARC) and HDCP repeater functions along with fast
switching between HDMI input ports. The system supports all 3D TV
formats in addition to all HDTV formats up to 1080p 12-bit Deep Color.
The included remote control gives users complete control over the
selection of sources and makes the device incredibly user friendly.
2. APPLICATIONS
• Share a single TV/Monitor input between up to 4 source devices
• Add additional HDMI inputs to an AV Receiver
• Lecture room presentation
• Public display
• Showroom presentation
3. PACKAGE CONTENTS
• 4×1 HDMI Switcher
• Remote Control
• 5 V/1 A Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as games consoles, Blu-ray players (or a PC/
Laptop with DVI with a DVI to HDMI adaptor cable) and a monitor or
TV with HDMI connection cable.

2
5. FEATURES
• Support multiplexed HDMI 4-input and 1-output
• HDMI, HDCP 1.4 and CEC1.4 compliant
• HDMI support:
- Audio Return Channel (ARC)
- 3D TV support
- CEC1.4
• Fast switching on all HDMI input ports
• Character and icon based On-Screen Display (OSD)
- System information for Software version
- Sink EDID
- Source info frame
- HDMI input Audio & Audio Return selection
• HDCP repeater support
• Deep Color support 36/30/24-bit, 1080p@60Hz
• Supports high resolution input and output:
- PC: VGA to WUXGA
- HDTV: 480i to 1080p@50/60 Hz, 1080p@24 Hz
• Supports HDMI input cable lengths of up to 10 meters (8/12-bit) and
HDMI output cable lengths of up to 15 meters (8/12-bit).
• Audio support:
- HDMI compatible audio interface
- Dedicated, exible audio input/output port
- Dolby TrueHD
- DTS-HD Master Audio 7.1CH
- Full audio input and output support

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
2341
CPRO-3D41GAME
3D/ARC
EDID/InfoFrame OSD
1
1INPUT LED 1/2/3/4 Indicators: These LEDs will light to indicate the
currently selected input.
6.2 Front Panel
INPUT
21
1IR Remote Control Sensor: Receives IR signals from the supplied
remote control.
2INPUT: Press this button repeatedly to cycle through the input
sources, the LED will illuminate to indicate the active input.

4
6.3 Left Panel
1USB 5V 2
HDMI IN
1 2
1USB 5V: Connect the USB power port to any powered USB port with
a Mini-B to A USB cable or a USB Mini-B to AC adaptor.
2HDMI IN 1/2: Connect to HDMI source devices such as a games
console with HDMI cables or a DVI source device such as a PC
with DVI to HDMI cables.
6.4 Right Panel
4OSD3
HDMI IN
1 2
1HDMI IN 3/4: Connect to the HDMI source devices such as a Blu-
ray player or a Set-top Box with HDMI cables.
2OSD: Press this button to bring up the OSD on the display and press
it again to turn it off.

5
6.5 Rear Panel
DC 5V
OUTPUTCOAX OUT
1 2 3
1COAX OUT: Connect to the co-axial input on an AV Receiver for
digital audio output. When the HDMI input signal has the Audio
Return Channel (ARC) activated, the audio from the HDTV will be
output from the co-axial output. If the ARC function is not active
then the audio from the source device will be output.
2OUTPUT: Connect to a HDMI equipped TV/monitor or AV receiver
for display of the selected HDMI source signal.
3DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet. The LED will light when connected to
power.
Note:
1. This device only supports 2 Channel PCM only.
2. The display must support the ARC function and must be active for
this feature to function.
3. The display's ARC enabled HDMI connection must be connected
to the device.
6.6 Remote Control
1MENU: Press to enter the OSD menu.
2ENTER: Press to conrm the selection.
3INPUT 1/2/3/4: Press to directly select the
required input.
4pqtu: Use the directional keys to
navigate the OSD menu and adjust the
settings.
CR-88*A
ENTERMENU
1
2
3
4
1
3
2
4

6
7. OSD MENU
7.1 Entering the Menu
- Press the OSD button on the device or the MENU key on the
remote control to bring up the OSD on the display.
- Press the Up or Down [p/q] keys to highlight an option.
- Press the Left or Right [t/u] keys to select the option.
- Press the 'Enter' key to conrm/exit the selection.
7.2 System Info
- Press the Up or Down [p/q] keys to highlight the 'System Info'
option.
- Press the 'Enter' key to check the input/output device information
and software version.
- Press the 'MENU' key to exit the menu.
- Press the 'Enter' key to conrm/exit the selection.

7
7.3 Sink EDID
- Press the Up or Down [p/q] keys to highlight the 'Sink EDID' option.
- Press the Left or Right [t/u] keys to select the option.
- Press the 'Enter' key to conrm/exit the selection.
- Press the 'MENU' key to exit the menu.
OPTION DESCRIPTION
Block Data To check the sink Block0 and Block1's table
of EDID
Description To check the sink description of EDID
7.4 Source Infoframe
- Press the Up or Down [p/q] keys to highlight the 'Source
Infoframe' option.
- Press the Left or Right [t/u] keys to select the option.
- Press the 'Enter' key to conrm/exit the selection.
- Press the 'MENU' key to exit the menu.
OPTION DESCRIPTION
AVI
(AVI infoframe data)
To check the source video infoFrame
Packet
AUD
(Audio infoframe data)
To check the source audio infoFrame
Packet
7.5 Input Select
- Press the Up or Down [p/q] keys to highlight the 'Input Selection'
option.
- Press the Left or Right [t/u] keys to select the option.
- Press the 'Enter' key to conrm/exit the selection.
- Press the 'MENU' key to exit the menu.

8
7.6 Audio Return
- Press the Up or Down [p/q] keys to highlight the 'Audio Return'
option.
- Press the Left or Right [t/u] keys to select the option.
- Press the 'Enter' key to conrm/exit the selection.
- Press the 'MENU' key to exit the menu.
OPTION DESCRIPTION
Audio Return On/Off
7.7 Exit
- Press the Up or Down [p/q] keys to highlight the 'Exit' option.
- Press the 'MENU' key to exit the menu.

9
8. CONNECTION DIAGRAM
2341
CPRO-3D41GAME
3D/ARC
EDID/InfoFrame OSD
DVD or Blu-ray Player
Set-top Box
HDMI Input HDMI Input HDMI Input HDMI Input
HDMI OutputAudio Return Channel
(ARC*)
Power Supply
HDTVAV Receiver
Coaxial Digital
Audio Output
Games Console
PC or Laptop
*ARC Equipped HDMI Connection Only

10
9. SPECIFICATIONS
Frequency Bandwidth 2.25 Gbps
Input Ports 4×HDMI Female ports
Output Port 1×HDMI Female port
HDMI Audio Output PCM 2CH, 5.1CH, 7.1CH, Dolby 5.1, DTS5.1,
Dolby Digital Plus, Dolby TrueHD, DTS-HD
HDMI Cable In 1080p 8-bit (10m), 12-bit (10m)
HDMI Cable Out 1080p 8-bit (15m), 12-bit (15m)
Resolution Support PC: VGA~WUXGA
HDTV: 480i~1080p@50/60 Hz, 1080p@24 Hz
Coaxial Audio Output PCM 2 CH
Power Supply 5 V/1 A DC (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human Body Model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions 100 mm (W)×70 mm (D)×20 mm (H)
Weight 90 g
Chassis Material Plastic
Color White
Power Consumption 4 W
Operating Temperature 0 ˚C ~ 40 ˚C / 32 ˚F ~ 104 ˚F
Storage Temperature −20 ˚C ~ 60 ˚C / −4 ˚F ~ 140 ˚F
Relative Humidity 20~60 % RH (non-condensing)
10. ACRONYMS
ACRONYM COMPLETE TERM
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High Denition Multimedia Interface



Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
Table of contents
Other CYP Switch manuals
Popular Switch manuals by other brands

NETGEAR
NETGEAR FSM726S installation guide

StarTech.com
StarTech.com SV431DPUA2 manual

Ruijie
Ruijie RG-N18000-E Series Hardware installation and reference guide

D-Link
D-Link DES-F1010P-E Getting started guide

TP-Link
TP-Link JetStream TL-SG2008 reference guide

Bircher
Bircher AirMission 2.W2 Translation of the original operating instruction

ATEN
ATEN CS428 user manual

HP
HP 2615 series Specifications

Resource Data Management
Resource Data Management Mercury PR0018 user guide

Dwyer Instruments
Dwyer Instruments Mini-Photohelic MP Series Installation and operating instructions

appceso
appceso Junior DC-24v Installation and adjustment manual

Asante
Asante FriendlyNET GX5-2400W Specifications