Cypress MB2198-01 User manual

The following document contains information on Cypress products. The document has the series
name, product name, and ordering part numbering with the prefix “MB”. However, Cypress will
offer these products to new and existing customers with the series name, product name, and
ordering part number with the prefix “CY”.
How to Check the Ordering Part Number
1. Go to www.cypress.com/pcn.
2. Enter the keyword (for example, ordering part number) in the SEARCH PCNS field and click
Apply.
3. Click the corresponding title from the search results.
4. Download the Affected Parts List file, which has details of all changes
For More Information
Please contact your local sales office for additional information about Cypress products and
solutions.
About Cypress
Cypress is the leader in advanced embedded system solutions for the world's most innovative
automotive, industrial, smart home appliances, consumer electronics and medical products.
Cypress' microcontrollers, analog ICs, wireless and USB-based connectivity solutions and reliable,
high-performance memories help engineers design differentiatedproducts and getthem tomarket
first. Cypress is committed to providing customers with the best support and development
resources on the planet enabling them to disrupt markets by creating new product categories in
record time. To learn more, go to www.cypress.com.

F2MC-16FX Family, Emulator System
MB2198-01 Installation Guide
Doc. No. 002-05547 Rev. *A
Cypress Semiconductor
198 Champion Court
San Jose, CA 95134-1709
http://www.cypress.com

Copyrights
F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 2
Copyrights
© Cypress Semiconductor Corporation, 2006-2016. The information contained herein is subject to change without notice.
Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a
Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor
intended to be used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express
written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical components in life-
support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The
inclusion of Cypress products in life-support systems application implies that the manufacturer assumes all risk of such use
and in doing so indemnifies Cypress against all charges.
Trademarks
All other trademarks or registered trademarks referenced herein are property of the respective corporations.
Source Code
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by
and subject to worldwide patent protection (United States and foreign), United States copyright laws and international treaty
provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create
derivative works of, and compile the Cypress Source Code and derivative works for the sole purpose of creating custom
software and or firmware in support of licensee product to be used only in conjunction with a Cypress integrated circuit as
specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source
Code except as specified above is prohibited without the express written permission of Cypress.
Disclaimer
CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described
herein. Cypress does not assume any liability arising out of the application or use of any product or circuit described herein.
Cypress does not authorize its products for use as critical components in life-support systems where a malfunction or failure
may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support
systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all
charges.
Use may be limited by and subject to the applicable Cypress software license agreement.

F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 3
Contents
1. Introduction ...................................................................................................................................................................5
2. Hardware Requirements ...............................................................................................................................................6
2.1 Devices ..................................................................................................................................................................6
3. Setting up the Emulation System.................................................................................................................................8
3.1 Installing the emulator system................................................................................................................................8
3.1.1 Adapter Board...........................................................................................................................................8
3.1.2 Main-Clock................................................................................................................................................9
3.1.3 Sub-Clock...............................................................................................................................................10
3.1.4 C-pin switching .......................................................................................................................................10
3.1.5 Mount the Adapter Board on the Emulator..............................................................................................10
3.1.6 Insert the Evaluation Chip.......................................................................................................................11
3.1.7 Connect the Probe Cable to the Adapter Board......................................................................................11
3.1.8 Connect the Emulator System with the Starter Kit..................................................................................11
3.1.9 The BGA416 MCU emulator system then looks like in the picture below: ..............................................12
3.1.10 DIP switches on the Target System (e. g. FLASH-CAN-100P-340)........................................................12
3.1.11 Connect the MB2198-01 Emulator to a PC or a LAN network................................................................12
3.1.12 Power connection ...................................................................................................................................12
3.1.13 Power down............................................................................................................................................12
4. Setting up the Emulation Software ............................................................................................................................13
4.1 Installing the emulator software on PC.................................................................................................................13
4.2 Check Emulation System with the IO-Port Sample Project..................................................................................13
5. Troubleshooting ..........................................................................................................................................................17
5.1 Emulator Software does not work in debugging mode.........................................................................................17
5.2 Wrong COM-Port in Softune Workbench .............................................................................................................17
5.3 Emulator MB2198-01 Menu Settings....................................................................................................................18
5.4 Using LAN............................................................................................................................................................18

Contents
F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 4
6. Appendix A .................................................................................................................................................................19
6.1 Table of Emulation System Configuration and supported Starterkits ...................................................................19
Revision History...................................................................................................................................................................20
Document Revision History ...........................................................................................................................................20

F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 5
1. Introduction
This installation guide will help you to quickly start setting up the MB2198-01 Emulation Hardware for Cypress
16FX Family MCUs and its usage with the Softune Workbench V30L33R08 or higher. For in-depth information
please refer to the following manuals:
MB2198-01 Hardware Manual (Emulator)
MB2198-500 Hardware Manual (Adapter Board BGA416)
Evaluation Board Documentation (e.g. for Flash-CAN-100P-340 v1.1)
At the end of this document you will find a guide of trouble shooting items, in order to perform a quick operation
check of the 16-bit emulation system.

F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 6
2. Hardware Requirements
Basic Devices of MB2198 Emulator System
2.1 Devices
The basic devices which are required for setting up the 16FX emulation system for 416-pin MB96V300
Evaluation MCU:
Emulator Main Unit MB2198-01
Adapter Board MB2198-500 BGA416

Hardware Requirements
F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 7
Probe Cable
(here: MB2198-501 QPF100 NQPACK)
(for MB96(F)34x)
Evaluation chip (here: MB96V300)
Target system
(here: FLASH-CAN-100P-340 Starter Kit Board)
RS232-, USB- or LAN-connection cable
Two Power supplies (12V DC)
In addition to the emulator, ordered from Cypress, a customer should get the ‘Accessories 16’-kit that includes a
set of manuals and some cables.

F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 8
3. Setting up the Emulation System
Hardware Installation
3.1 Installing the emulator system
Attention: Be sure that the system is not connected to any power supply, when connecting or disconnecting
components to and from it.
3.1.1 Adapter Board
MB2198-500
Figure 3-1. Clock installation
The red arrow marks the crystal-area of the Main-Clock.
The white arrow marks the crystal-area of the Sub-Clock.

Setting up the Emulation System
F2MC-16FX Family, Emulator System MB2198-01 Installation Guide, Doc. No. 002-05547 Rev. *A 9
The Figure 3-2 shows the schematic of the Clock-Supply circuit. The correct setting has to be done by jumpers
S3, S4, and S5.
Figure 3-2. Clock supply configuration
3.1.2 Main-Clock
It is recommended to install a crystal and two capacitors (about 15 pF) directly to the Adapter Board. See
Figure 3-1.
To supply the Main-clock from the user system, add an oscillator to the user system and have the Main-clock
supplied using a CMOS buffer.
Please refer to the graphic above and to the Figure 3-1how to enable the Main-Clock.
Table 3-1. Main-Clock Supply
Clock Supply
S3
S4
S5
X0
X1
CLKSEL0
CLKSEL1
X0A
X1A
Main-Clock on adapter-board
EML
EML
*S
*S
*S
*S
Main-Clock on target system
USR
USR
*S
*S
*S
*S
*S: see Sub-Clock
S
5
[
X
0
A
]
S
5
[
X
1
A
]
U
S
R
U
S
R
S
3
[
X
0
]
S
3
[
X
1
]
X
0
X
1
U
s
e
r
X
0
U
s
e
r
X
1
E
M
L
E
M
L
P
o
r
t
P
o
r
t
C
L
K
C
L
K
U
S
R
U
S
R
X
0
A
X
1
A
U
s
e
r
X
0
A
U
s
e
r
X
1
A
G
P
0
4
_
0
G
P
0
4
_
1
E
M
L
E
M
L
S4 [CLKSEL0]
S4 [CLKSEL1]
USR
X1
EML
USR
EML
X0
S3 [X1]
S3 [X0]
User X1
User X0
User X1A
User X0A
Port
CLK
Port
CLK
S5 [X1A]
S5 [X0A]
GP04_1
X1A
GP04_0
X0A
USR
EML
USR
EML