cytiva Frac30 User manual

Frac30
Unpacking Instructions
Read this before unpacking Frac30
This instruction contains information that is important for safety during the unpacking of
Frac30. Read the whole instruction carefully before starting to unpack the Fraction
collector.
When you receive the delivery
•Record on the receiving documents if there is any apparent damage on the delivery
box. Inform your Cytiva representative of such damage.
•Move the delivery box to a protected location indoors.
About this instruction
This instruction covers unpacking of Frac30. See ÄKTA™ start Operating Instructions for
instructions on how to install Frac30.
Notes
Note: A note is used to indicate information that is important for trouble-free and
optimal use of the product.
cytiva.com 29027102 AE

Safety notices
This user documentation contains NOTICES concerning the safe use of the product. See
definition below.
NOTICE
NOTICE indicates instructions that must be followed to avoid
damage to the product or other equipment.
Unpack Frac30
Follow the instructions below to unpack the Fraction collector.
NOTICE
Take care not to damage the Dispenser arm when lifting Frac30 or
when removing the plastic bag.
NOTICE
Never lift Frac30 by the Dispenser arm. This may damage the
Fraction collector. Use the lifting handle on the bottom plate.
Note: Do not damage or break the warranty seal label during unpacking of Frac30.
Note: Save all the original packing material. If the system has to be repacked, for
transportation or otherwise, it is important that the system can be safely
packed using the original packing material.
Note: Frac30 with packaging weighs about 8 kg. No lifting equipment is required,
one person can lift and move the Fraction collector.
2 Frac30 Unpacking Instructions 29027102 AE

Step Action
1Open the Frac30 delivery box by cutting the adhesive tape at the top of the
box. Take out and read the Unpacking Instructions.
2Holding the red strap, lift the Fraction collector out of the delivery box. Place
the Fraction collector on the laboratory bench.
Frac30 Unpacking Instructions 29027102 AE 3

Step Action
3Open the strap lock and remove the strap.
4Remove the foam cushion from the top of the Fraction collector.
4 Frac30 Unpacking Instructions 29027102 AE

Step Action
5Remove the foam cushion from the bottom of the Fraction collector by
carefully lifting the Fraction collector.
6Remove the plastic bag.
Frac30 Unpacking Instructions 29027102 AE 5

Step Action
7Remove the Bowl assembly from the Base unit:
•Gently move the Dispenser arm counterclockwise to the end position.
•Push the Drive assembly and hold it at the retracted position. At the same
time, lift the Bowl assembly.
8Remove the foam cushion located on the Base unit.
6 Frac30 Unpacking Instructions 29027102 AE

Step Action
9Re-assemble the Bowl assembly on to the Base unit:
•Orient the Bowl to match the aligning groove and the aligning features
located on the Bowl holder.
•Slightly push the Drive assembly laterally and lower the Bowl assembly on
to the Base unit.
Frac30 Unpacking Instructions 29027102 AE 7

cytiva.com/AKTA
Cytiva and the Drop logo are trademarks of Global Life Sciences IP Holdco LLC or an affiliate.
ÄKTA is a trademark of Global Life Sciences Solutions USA LLC or an affiliate doing business as Cytiva.
All other third-party trademarks are the property of their respective owners.
© 2020–2021 Cytiva
All goods and services are sold subject to the terms and conditions of sale of the supplying company operating within the Cytiva
business. A copy of those terms and conditions is available on request. Contact your local Cytiva representative for the most
current information.
For local office contact information, visit cytiva.com/contact
29027102 AE V:6 01/2021