D-Link SECURICAM DCS-6511 User manual

2D-Link DCS-6511 User Manual

 
Package Contents ...................................................4

Hardware Overview .................................................5
Camera Enclosure Disassembly and SD Card
Installation ...............................................................6
Hardware Reset .......................................................7
Preparing for Installation ..........................................8
Adjusting the Viewing Angle ..................................11
Standard Mounting Instructions .............................12
Style 1 - Concealed Cable Installation .............12
Style 2 - Exposed Cable Installation ................14
Pendant Mount (DCS-34-2) ...................................16
Bent Mount (DCS-34-3) .........................................18
Network and Power Connections .......................... 20
 
Conguration with Wizard ...................................... 21
Web-based Conguration Utility ............................26
Live Video ..............................................................28
Setup .....................................................................30
Wizard ..............................................................30
Internet Connection Setup Wizard ...................30
Motion Detection Setup Wizard .......................33
Network Setup .................................................35
Dynamic DNS ..................................................37
Image Setup .................................................... 38
Audio and Video .............................................. 40
Lens Control .................................................... 42
Motion Detection ..............................................43
Time and Date .................................................44
Event Setup .....................................................45
Application .......................................................46
Add Server .......................................................47
Add Media ........................................................48
SD Card ...........................................................53
Advanced ...............................................................54
Digital Input/Output ..........................................54
ICR and IR .......................................................55
HTTPS .............................................................56
Access List .......................................................57
Maintenance ..........................................................58
Device Management ........................................58
Backup and Restore ........................................59
Firmware Upgrade ...........................................60
Status ....................................................................61
Device Info .......................................................61
Logs .................................................................62
Help .................................................................63
 
DI/DO Schematics .................................................64
Technical Specications ........................................65

3D-Link DCS-6511 User Manual
D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or
organization of such revisions or changes.


D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or
other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective
companies.
Copyright © 2010 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link
Systems, Inc.
  
1.0 September 30, 2010 DCS-6511 Revision A1 with rmware version 1.00


4D-Link DCS-6511 User Manual
Product OverviewProduct Overview
If any of the above items are missing, please contact your reseller.
















 

5D-Link DCS-6511 User Manual
Installation

Installation

Used to illuminate the camera's
eld of view at night

Motorized varifocal autofocus lens

6D-Link DCS-6511 User Manual
Installation

Push the SD card into the camera with the gold contacts oriented towards the base of
the camera. To eject the SD card, push the SD card into the slot.


Open the camera enclosure by removing the 3 standard screws using a screwdriver.
Remove the 4th screw using the provided security wrench.
Lift the dome off of the base of the camera.



7D-Link DCS-6511 User Manual
Installation


If the camera is malfunctioning, you may use the hardware reset button located on the
underside of the camera apparatus to reset the camera to factory default settings. Press
and hold the reset button for approximately 10 seconds to reset the camera.

Resets camera to factory default settings


8D-Link DCS-6511 User Manual
Installation
A. Depending on how you choose to mount the camera, you may need to
change the orientation of the cable. For instance, when using the Surface
Mounting Bracket, the cables may need to exit through the side of the
camera base rather than the top.

1. Disassemble the camera enclosure. (See Figure A. on page 6.)
2. Loosen, but do not remove, the two screws that secure the camera
bracket to the base of the enclosure using a screwdriver. (Figure 1.1)
3. Slide the camera bracket towards the front of the camera base.
(Figure 1.2)




9D-Link DCS-6511 User Manual
Installation
4. Lift the camera bracket up and off from the camera base. (Figure 1.3)
5. Disconnect the cables from the connectors at the base of the camera.
6. Place the cable into the new hole and reconnect the cables to the
cable connectors at the base of the camera. (Figure 1.4)
7. Replace the chrome plug and tighten it into place.
8. Replace the chrome nut and tighten it into place
B. Replace the dome enclosure over the IP camera and tighten the 4 screws.

Installation and servicing should be done by certied technicians so as to
conform to all local codes and prevent voiding your warranty.


10D-Link DCS-6511 User Manual
Installation


Connects to 12 V DC
Power adapter

Connects to a microphone

I/O connectors for external devices

RJ-45 connector for Ethernet
which can also be used to power
the camera using Power over
Ethernet (PoE)

Connects to 24 V AC power

Connects to speakers

11D-Link DCS-6511 User Manual
Installation

Turn the lens module left and right until the desired position is achieved; tighten the pan
screw once completed.
Loosen the tilt screws on both sides of the camera, and turn the lens module up and
down until the desired position is achieved; tighten the tilt screws once completed.
Turn the lens to adjust the IP camera’s image until the desired orientation is achieved.
Tighten the image adjustment screw once completed.


12D-Link DCS-6511 User Manual
Installation


1. Disassemble the camera enclosure (see page 6).
2. Thread the cables through the waterproof plugs at the bottom of the base of the
camera. Attach the cables to the corresponding cable connectors. (Figure 2.1)
3. Locate a suitable position on the ceiling for the mounting plate to be installed.
4. Use the mounting template to mark the holes for installation.
5. Cut an access hole in the ceiling for the cables.
6. Drill four separate 6 mm holes corresponding to the holes in the mounting template
and insert the plastic anchors into these holes.
7. Attach the surface bracket to the ceiling using the screws provided.


13D-Link DCS-6511 User Manual
Installation
8. Connect the Ethernet cable and the power cable, threading them through the hole
in the ceiling. (Figure 2.2)
9. Push the dome body up over the base of the camera.
10. Attach the dome to the base of the camera using the 3 long screws and the
provided security screw.


14D-Link DCS-6511 User Manual
Installation

1. Disassemble the camera enclosure (see page 6).
2. Remove the small screw to release the faceplate on the side of the base of the
camera. (Figure 2.3)
3. Thread the cables through the waterproof plugs on the side of the base of the
camera. Attach the cables to the corresponding cable connectors. (See page 10.)
4. Attach the dual-holed plate to the base of the camera. (Figure 2.4)



15D-Link DCS-6511 User Manual
Installation


5. Place the plastic cable cover onto the dual-holed plate and attach it
using the screw. (Figure 2.5)
6. Locate a suitable position on the ceiling for the mounting plate to be
installed.
7. Use the mounting template to mark the holes for installation.
8. Drill 4 separate 6 mm holes corresponding to the holes in the
mounting template and insert the plastic anchors into these holes.
9. Attach the surface bracket to the ceiling using the screws provided.
10. Place the dome body onto the base of the camera. (Figure 2.6)
11. Attach the dome to the base of the camera using the 3 long screws
and the provided security screw.

16D-Link DCS-6511 User Manual
Installation

1. Attach the mounting plate to the bracket cap using the three screws as shown in
Figure 3.1.
2. Locate a suitable position on the ceiling for a 34 mm (+2 / –0 mm) hole to be cut. A
template is included to aid in marking the mounting hole.
3. Cut the hole in the ceiling according to the template.
4. Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and
insert the plastic anchors into these holes.
5. Place the rubber seal between the pendant bracket and the ceiling to ensure a
waterproof seal between the ceiling and the bracket. (Figure 3.2)
6. Attach the pendant bracket to the ceiling using the screws provided.
7. Attach the bracket cap to the bottom of the pendant bracket, rotating the cap
counter-clockwise to tighten it into place.
8. Insert the screw into the base of the pendant bracket at the top of the bracket cap to
secure the bracket cap into place.
Pendant
Bracket
Bracket
Cap
Rubber
Seal


Bracket
Cap
Mounting
Plate

17D-Link DCS-6511 User Manual
Installation
9. Connect the Ethernet cable and the power cable and thread them through the
pendant bracket.
10. Place the dome body onto the base of the camera. (Figure 3.3)
11. Attach the dome to the base of the camera using the 3 long screws and the
provided security screw.



18D-Link DCS-6511 User Manual
Installation

1. Attach the mounting plate to the bracket cap using the three screws as shown in
Figure 4.1.
2. Locate a suitable position on the ceiling for a 34 mm (+2 / –0 mm) hole to be cut. A
template is included to aid in marking the mounting hole.
3. Cut the hole in the ceiling according to the template
4. Drill 4 separate 6 mm holes corresponding to the holes in the mounting template and
insert the plastic anchors into these holes.
5. Place the rubber seal between the bent bracket and the ceiling to ensure a
waterproof seal between the ceiling and the bracket. (Figure 4.2)
6. Attach the pendant bracket to the ceiling using the screws provided.
7. Attach the bracket cap to the bottom of the bent bracket, rotating the cap counter-
clockwise to tighten it into place.
8. Insert the screw into the base of the bent bracket at the top of the bracket cap to
secure the bracket cap into place.
9. Connect the Ethernet cable and the power cable and thread them through the
pendant bracket.
Bracket
Cap
Bent
Bracket


Bracket
Cap
Mounting
Plate

19D-Link DCS-6511 User Manual
Installation
10. Place the dome body onto the base of the camera. (Figure 4.3)
11. Attach the dome to the base of the camera using the 3 long screws and the
provided security screw.
Dome
Camera
Bent
Bracket



20D-Link DCS-6511 User Manual
Installation


1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power outlet.

1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power source
such as your building's emergency power.

If you are using a PoE hub, connect the IP camera to the hub via an
Ethernet cable, which will provide transmission of both power and data
over a single cable.