D-Link DCS-932L User manual

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 1/7
DCS932LGuide
DLink DCS 932L
Introduction
This setup guide will step you through the process of configuring your DLink DCS932L to work with Cammy.
This camera is supported by our autosetup process, but if you get stuck, this guide should be able to help
you!
1. Power on you Camera.
Take the camera out of the box, plug it into a network cable and connect the power.
2. Download Cammy
Download the Cammy app on either iPhone App Store or Google Play.
3. Launch the App
Launch the app and enter a username and password.
4. Add Camera
Choose “Add Camera” from the menu.

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 2/7
5. Find your Camera
You will see a list of devices on your network. Look for a device named “DLink International”. If you don’t
see any DLink device try waiting a couple of minutes and refreshing by pulling down on the list. Once you
see the “DLink International” device click on it.

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 3/7
6. Check the MAC Address
Cammy will show you a MAC address number. If you want to be sure it’s the right device you can compare
this number with the one on your Camera, but generally it should be right and you can press “Continue with
Setup”.

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 4/7
Verify the MAC addresses match.

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 5/7
This camera shows the MAC ID on the side: 28107B0A5614.
7. Enter Username and Password
You will then be asked to enter your camera’s user name and password. If you have just got the camera out
of the box, leave it as “admin” with no password. If you have previously set a password you should enter that
password. Choose continue.
8. Enter Wifi Password
You will be asked for your Wifi password if you want the camera to be used wirelessly, which is best in most
situations. Choose continue.
9. Test Images
The Camera will then show a test image. If the test image does not appear try hitting refresh and waving
your hand in front of the camera. If the test image does not appear try restarting the camera and running the
setup process again.

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 6/7

5/9/2014 Cammy - free & easy IP camera monitoring
http://www.cammy.com/guides/d-link-dcs-932l-guide 7/7
Congratulations!
You have now completed the setup of your DCS932L to CAMMY.