D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... User manual

This document will guide you through the
basic installation process for your new
D-Link Dual Band PoE Access Point
DAP-2553
Documentation also available on CD
and via the D-Link Website
Quick Installation Guide
Wireless N Dual Band PoE Access Point
Quick Installation Guide
Installationsanleitung
Guide d’installation
Guía de instalación
Guida di Installazione
Wireless AP
Power5 GHZ2 .4GHZ LAN

Quick Install Guide
This installation guide provides basic instructions
for installing the DAP-2553 Wireless N Dual Band
PoE Access Point on your network. For additional
information about how to use the Access Point,
please see the datasheet and user manual from
the D-Link support website.
Minimum System
Requirements
Computer with Windows, MAC OS, or Linux-
based operating system, and an Ethernet
adapter installed
-Internet Explorer 7.0, Mozilla Firefox®
version 12.0, Safari 4.0, or Chrome 20.0 or
newer
Package Contents
-DAP-2553 802.11n Power over Ethernet
Access Point
-Installation CD-ROM
-Quick Installation Guide
-3 Detachable Antennas
-CAT5 Ethernet Cable
NOTE no PSU supplied. To power the units use
an D-Link PoE switch or the D-Link DPE-101GI
PoE injector.
Physical Installation
Connect the AP to Your Network
A. Connect an external Power-over-Ethernet
(PoE) switch to the LAN(PoE) port to
power on access point.
B. Connect PC to the switch and you can
congure access point through web UI.
C. Open a web browser and go to https://IP
address (default is https://192.168.0.50).
Enter admin as your username and leave
the password blank to log into the web UI.
Now you can congure the AP via web UI.
D. Purchase separately a DPE-101GI PoE
injector if you need to connect the Access
Point without a PoE Switch.
A
B
PoE Switch Computer
AP
LAN (PoE)
TECHNICAL SUPPORT dlink.com/support
3
D-Link DAP-2553 Quick Install Guide
ENGLISH

4D-Link DAP-2553 Installationsanleitung
Installationsanleitung
Diese Installationsanleitung bietet Ihnen
grundlegende Anleitungen zur Installation des
DAP-2553 802.11n Power over Ethernet Access
Point in Ihrem Netzwerk. Zusätzliche Infor-
mationen zur Verwendung des Access Point
nden Sie auf dem Datenblatt und im Benut-
zerhandhandbuch, die Ihnen auf der Support
Website von D-Link zur Verfügung stehen.
Mindestsystemanforderungen
Computer mit Windows, MAC OS oder
Linux-basiertem Betriebssystem und einem
installierten Ethernet-Adapter
-Internet Explorer 7.0, Mozilla Firefox®
Version 12.0, Safari 4.0 oder Chrome 20.0
oder höher
Packungsinhalt
-DAP-2553 802.11n Power over Ethernet
Access Point
-Installations-CD-ROM
-Installationsanleitung
-3 abnehmbare Antennen
-CAT5-Ethernetkabel
HINWEIS: keine
Stromversorgungseinheiten im
Lieferumfang. Zur Stromversorgung der
Einheiten nutzen Sie einen D-Link PoE
Switch oder den D-Link DPE-101GI
PoE-Injektor
Physische Installation
Verbinden Sie den AP mit Ihrem
Netzwerk
A. Schließen Sie einen externen Pow-
er-over-Ethernet (PoE) Switch an den
LAN (PoE) Port an, um den Access Point
mit Strom zu versorgen.
B. Schließen Sie den PC an den Switch an,
um den Access Point über die webbasier-
te grasche Benutzeroberäche zu kon-
gurieren.
C. Öffnen Sie einen Webbrowser und ru-
fen Sie https://IP address (default is htt-
ps://192.168.0.50) auf. Geben Sie admin
als Ihren Benutzernamen ein und lassen
Sie das Kennwortfeld leer, um sich auf
der webbasierten Benutzeroberäche
anzumelden. Sie können nun den AP
über die webbasierte Benutzeroberäche
kongurieren.
D. Sie müssen einen DPE-101GI PoE-
Injektor gesondert erwerben, soll der
Access Point ohne einen PoE Switch
angeschlossen werden.
A
B
PoE Switch Computer
AP
LAN (PoE)
TECHNISCHE UNTERSTÜTZUNG dlink.com/support
DEUTSCH

5
Guide d’installation rapide du DAP-2553 de D-Link
Guide d’installation rapide
Ce guide d'installation fournit les instructions
de base pour l'installation du point d'accès
PoE 802.11n DAP-2553 sur votre réseau. Pour
de plus amples informations sur l'utilisation du
point d'accès, consultez la che technique et le
manuel d'utilisation sur le site Web d'assistance
de D-Link.
Conguration minimale
requise
Ordinateurs avec système d’exploitation
Windows, MAC OS ou Linux et équipés d’un
adaptateur Ethernet
-Internet Explorer 7.0, Mozilla Firefox®
version 12.0, Safari 4.0 ou Chrome 20.0 ou
toute version plus récente
Contenu de la boîte
-Point d'accès PoE 802.11n DAP-2553
-CD-ROM d'installation
-Guide d'installation rapide
-3antennes amovibles
-Câble Ethernet CAT5
REMARQUE aucune unité d'alimentation
fournie. Pour alimenter les appareils, utilisez un
commutateur PoE de D-Link ou l'injecteur PoE
DPE-101GI de D-Link.
Installation physique
Connectez le PA à votre réseau
A. Connectez un commutateur PoE (Power-
over-Ethernet) externe au port LAN (PoE)
pour mettre le point d'accès sous tension.
B. Connectez le PC au commutateur an
de pouvoir congurer le point d'accès via
l'interface web.
C. Ouvrez un navigateur Web et allez sur
https://adresse IP (http://192.168.0.50
par défaut). Saisissez admin comme nom
d'utilisateur et laissez le mot de passe
vierge pour vous connecter à l'interface
Web. Vous pouvez maintenant congurer
le PA via l'interface Web.
D. Achetez séparément un injecteur PoE
DPE-101GI si vous devez connecter le
point d'accès sans un commutateur PoE.
ASSISTANCE TECHNIQUE dlink.com/support
A
B
Commutateur PoE Ordinateur
PA
LAN (PoE)
FRANÇAIS

6Guía de instalación rápida de D-Link DAP-2553
Guía de instalación rápida
Esta guía de instalación proporciona
instrucciones básicas para la instalación del
punto de acceso 802.11n con alimentación a
través de Ethernet DAP-2553 en su red. Para
obtener información adicional acerca de cómo
utilizar el punto de acceso, consulte la hoja
informativa y el manual del usuario en el sitio
web de soporte de D-Link.
Requisitos mínimos del
sistema
Ordenador con sistema operativo basado en
Windows, MAC OS o Linux y un adaptador
Ethernet instalado
-Internet Explorer 7,0, Mozilla Firefox®
versión 12.0, Safari 4.0, Chrome 20.0 o
posterior
¿Qué contiene la caja?
-DAP-2553 - Punto de Acceso 802.11n con
alimentación a través de Ethernet
-CD-ROM de instalación
-Guía de instalación rápida
-3 antenas desmontables
-Cable Ethernet CAT5
Tenga en cuenta que el dispositivo se
suministra SIN fuente de alimentación. Para la
alimentación del mismo, utilice un conmutador
PoE de D-Link o el inyector PoE DPE-101GI de
D-Link.
Instalación física
conectar el AP a la red
A. Conecte un conmutador de alimentación
a través de Ethernet (PoE) externo al
puerto LAN (PoE) para encender el punto
de acceso.
B. Conecte el PC al conmutador y podrá
congurar el punto de acceso a través de
la interfaz de usuario web.
C. Abra un explorador de web y vaya a
https://dirección IP (la predeterminada
es https://192.168.0.50). Introduzca
admin como nombre de usuario y deje la
contraseña en blanco para iniciar sesión
en la interfaz de usuario web. Ahora
puede congurar el AP a través de la
interfaz de usuario web.
D. Adquiera un inyector PoE, DPE-101GI,
por separado para alimentar el punto de
acceso sino dispone de un conmutador
PoE.
A
B
Conmutador PoE Ordenador
AP
LAN (PoE)
ASISTENCIA TÉCNICA dlink.com/support
ESPAÑOL

7
Guida di installazione rapida di D-Link DAP-2553
Guida di installazione rapida
In questa guida di installazione sono riportate
le istruzioni di base per installare il punto di
accesso Power over Ethernet DAP-2553 802.11n
in rete. Per ulteriori informazioni sull'utilizzo del
punto di accesso, consultare la scheda tecnica
e il manuale dell'utente disponibili sul sito Web
di supporto di D-Link.
Requisiti minimi di sistema
Computer dotato di sistema operativo
Windows, Mac OS o Linux e scheda Ethernet
installata
-Internet Explorer 7.0, Mozilla Firefox®
versione 12.0, Safari 4.0, Chrome 20.0 o
versione più recente
Contenuto della confezione
-Punto di accesso Power over Ethernet
DAP-2553 802.11n
-CD-ROM di installazione
-Guida di installazione rapida
-3 antenne staccabili
-Cavo Ethernet CAT5
NOTA nessuna PSU fornita. Per alimentare
le unità utilizzare uno switch PoE D-Link o
l'iniettore PoE D-Link DPE-101GI
Installazione sica
PASSO 5: collegamento del punto
di accesso alla rete
A. Collegare uno switch Power-over-
Ethernet (PoE) esterno alla porta LAN
(PoE) per alimentare il punto di accesso.
B. Collegare il PC allo switch per congurare
il punto di accesso tramite l'interfaccia
utente Web.
C. Aprire un browser Web e accedere a
https://indirizzo IP (quello predenito è
https://192.168.0.50). Immettere admin
come nome utente e lasciare il campo
della password vuoto per accedere
all'interfaccia utente Web. A questo punto
è possibile congurare il punto di accesso
tramite l'interfaccia utente Web.
D. Acquistare separatamente un iniettore
PoE DPE-101GI per collegare il punto
d'accesso senza uno Switch PoE.
A
B
Switch PoE Computer
Punto di
accesso
LAN (PoE)
SUPPORTO TECNICO dlink.com/support
ITALIANO

1. see overleaf for selected
product information.
FREE Central
WiFiManager
User Interface
Supports
multiple
languages
With the easy-to-use web-based interface you can...
• Congure once and apply to multiple Access Points
• Install on Windows PC
• Access on any device using a web-browser,
e.g. smartphone or notebook
• Utilise user authentication and access control
• Monitor your entire wireless network in real time1
• Access detailed reports
• Optimise your bandwidth
FREE Central
WiFiManager
Software
DOWNLOAD
NOW
DLINK.COM/WIFIDOWNLOAD
Connect to More
www.dlink.com/widownload

FREE Central WiFiManager
Connect to More
www.dlink.com/widownload
2. Visit dlink.com for selected Hardware & Software versions.
DAP-2695
Wireless AC1750
Indoor Access
Point
Designed to
support small to
medium business
or enterprise
environments. Se-
cure, manageable
dual-band wireless
LAN options.
DAP-2660
Wireless AC1200
Indoor Ceiling
Access Point
Providing en-
hanced speeds of
Wireless AC as well
as dual-band con-
nectivity to reduce
interference, for a
faster and more ef-
cient network.
DAP-2310
Wireless N Indoor
Access Point
Ideal for creating
or expanding cap-
acity of a wireless
network; mainly
used in high-trac
areas such as air-
ports, coee shops,
sports venues, and
university campus
deployments.
DAP-2360
Wireless N PoE
Access Point
For advanced in-
door installations,
this high-speed
Access Point has
integrated PoE
support, allowing
installation in
areas where power
outlets are not
readily available.
DAP-2553
Wireless N
Simultaneous
Dual-Band PoE
Access Point
Designed for
indoor installation
where power out-
lets are not readily
available. Enables
deployment of a
highly manage-
able, robust and
secure wireless
network.
DAP-2330
Wireless N PoE
Access Point
Ideal for wireless
networks in high-
trac areas such
as airports, coee
shops, shopping
centres, sporting
venues,
hotels and campus
deployments. PoE
oers installation
where power
outlets are not
available.
Available on the following products2:

NOTES