Daikin BRP069A71 How to use

Installer reference guide
WLAN adapter Heating
BRP069A71

Table of contents
Installer reference guide
2
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
Table of contents
1 About this document 3
2 About the adapter 4
2.1 Components.................................................................................................................................................................... 4
2.2 Basic parameters............................................................................................................................................................. 4
2.3 Compatibility................................................................................................................................................................... 5
3 About the box 6
3.1 To unpack the adapter.................................................................................................................................................... 6
4 Preparation 7
4.1 Installation site requirements......................................................................................................................................... 7
4.2 Overview of electrical connections ................................................................................................................................ 7
5 Installation 8
5.1 Precautions when installing the adapter........................................................................................................................ 8
5.2 Overview: Installation ..................................................................................................................................................... 8
5.3 Connecting the electrical wiring..................................................................................................................................... 8
5.3.1 Precautions when connecting the electrical wiring....................................................................................... 8
5.3.2 To connect the adapter with the unit............................................................................................................ 9
5.4 Closing the adapter......................................................................................................................................................... 9
5.4.1 To close the adapter....................................................................................................................................... 9
5.5 Mounting the adapter .................................................................................................................................................... 10
5.5.1 About mounting the adapter ......................................................................................................................... 10
5.5.2 To mount the adapter to the unit.................................................................................................................. 10
5.6 Opening the adapter....................................................................................................................................................... 11
5.6.1 About opening the adapter............................................................................................................................ 11
5.6.2 To open the adapter....................................................................................................................................... 11
6 Starting up the system 13
7 Configuration 14
8 Hand-over to the user 15
9 Troubleshooting 16
9.1 Overview: Troubleshooting ............................................................................................................................................ 16
9.1.1 Symptom: The LEDs do not turn on when the adapter is connected to the unit and the unit is powered
ON ................................................................................................................................................................... 16
9.1.2 Symptom: The adapter is NOT responding to interaction with the indoor unit........................................... 16
9.1.3 Symptom: Nothing happens when the adapter is in AP mode ..................................................................... 16

1 | About this document
Installer reference guide
3
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
1 About this document
Target audience
Authorised installers
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions
-Safety instructions that you must read before installing
-Format: Paper (in the box of the indoor unit)
▪Installation manual:
-Installation instructions
-Format: Paper (supplied in the kit)
▪Installer reference guide:
-Installation instructions, configuration, application guidelines,…
-Format: Digital files on http://www.daikineurope.com/support-and-manuals/
product-information/
▪Declaration of conformity:
INFORMATION: Declaration of conformity
Hereby, Daikin Europe N.V. declares that the radio equipment type BRP069A71 is in
compliance with the Directive 2014/53/EU. The original declaration of conformity is
available from http://www.daikineurope.com/support-and-manuals/product-
information/.
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.
The original documentation is written in English. All other languages are
translations.

2 | About the adapter
Installer reference guide
4
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
2 About the adapter
Wireless LAN adapter to connect the heat pump system to the Daikin Cloud via the
internet, allowing for control of the heat pump system with the Daikin Residential
Controller app.
2.1 Components
Component Description
RUN ▪LED ON: adapter active as station, and
connected to a network.
▪LED flashing: adapter active as station
and not yet connected to a network.
AP ▪LED ON: adapter active as access
point, and mobile device associated.
▪LED flashing: adapter active as access
point, but no mobile device
associated yet.
SETUP Press to connect the adapter to a
router.
MODE Hold to toggle AP mode on and off.
POWER Press to reset the adapter.
2.2 Basic parameters
Parameter Value
Frequency range 2400MHz~2483.5MHz
Radio protocol IEEE 802.11b/g/n
Radio frequency channel 1~13
Output power 0dBm~18dBm
Effective radiated power 17dBm (11b) / 14dBm (11g) / 13dBm
(11n)
Power supply DC 14 V / 100 mA

2 | About the adapter
Installer reference guide
5
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
2.3 Compatibility
Make sure the heat pump system is compatible for use with the adapter. For more
information, see the installer reference guide of the heat pump system.

3 | About the box
Installer reference guide
6
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
3 About the box
3.1 To unpack the adapter
1Open the box.
2Take out the adapter.
3Separate the accessories.
ab
i
c
e
gf
h
d
aAdapter
bAdapter holder with double-sided tape
cCable tie mounting
dCable tie
eConnection cable
fInstallation manual
gTape for adapter holder
hLabel for manual
iScrews

4 | Preparation
Installer reference guide
7
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
4 Preparation
4.1 Installation site requirements
▪The adapter is designed to be mounted to the indoor unit, in dry, indoor
locations only.
▪The exact location of the adapter depends on the type of indoor unit. For more
information, see the addendum book for optional equipment of the indoor unit.
▪The adapter is designed to operate in ambient temperatures ranging from
5~35°C.
Do NOT install the adapter in the following places:
▪In places where it is exposed to direct sunlight.
▪In places where it is near a heat source.
▪In places where it is exposed to a source of steam.
▪In places where it is exposed to machine oil vapour.
4.2 Overview of electrical connections
a
aTo indoor unit

5 | Installation
Installer reference guide
8
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
5 Installation
5.1 Precautions when installing the adapter
DANGER: RISK OF ELECTROCUTION
▪Turn off the power supply before installing the adapter.
▪Do NOT handle the adapter with wet hands.
▪Do NOT let the adapter get wet.
▪Do NOT disassemble, modify or repair the adapter.
▪Grip the connector when disconnecting the connection cable.
▪Turn off the power supply in case the adapter gets damaged.
Symbol Explanation
The protection of appliances marked with this symbol is ensured
by double insulation and does not require a safety connection to
electrical earth (ground).
5.2 Overview: Installation
The installation of the adapter consists of the following stages:
1Connecting the electrical wiring;
2Closing the adapter;
3Mounting the adapter to the unit.
INFORMATION
Where to connect the electrical wiring on the indoor unit, and where to mount the
adapter, depends on the type of indoor unit. For more information, see the
addendum book for optional equipment of the indoor unit.
5.3 Connecting the electrical wiring
5.3.1 Precautions when connecting the electrical wiring
INFORMATION
Also read the precautions and requirements in the following chapters:
▪General safety precautions
▪Preparation
DANGER: RISK OF ELECTROCUTION
Do NOT turn on the power supply before you have connected the electrical wiring,
closed the adapter, and mounted it to the indoor unit.

5 | Installation
Installer reference guide
9
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
5.3.2 To connect the adapter with the unit
1Separate the upper casing from the lower casing.
a
c
b
aUpper casing
bAdapter PCB
cLower casing
2Connect the forked end of the connection cable to the indoor unit.
3Connect the other end of the connection cable to the connector on the
adapter PCB.
4Fasten the cable and ensure strain relief.
a
aConnector
INFORMATION
Where to connect the electrical wiring on the indoor unit depends on the type of
indoor unit. For more information, see the addendum book for optional equipment
of the indoor unit.
INFORMATION
Provide strain relief at indoor unit side by using the cable tie and cable tie mounting
that are included as accessory.
5.4 Closing the adapter
5.4.1 To close the adapter
1Hook the front casing into the rear casing.

5 | Installation
Installer reference guide
10
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
2Insert the two screws from the accessory bag.
2×
NOTICE
After closing the adapter, check that the connection cable is securely fastened.
5.5 Mounting the adapter
5.5.1 About mounting the adapter
Mount the adapter to the indoor unit by making use of the holder and tape that
are included in the accessory bag.
NOTICE
▪Make sure that the part of the indoor unit to which you mount the holder is
clean.
▪Make sure to mount the holder to the indoor unit firmly, so that it can bear the
weight of the adapter.
5.5.2 To mount the adapter to the unit
1Attach the double-sided tape to the adapter holder.

5 | Installation
Installer reference guide
11
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
a
b
aTape
bAdapter holder
2With the tape, mount the holder to the indoor unit.
3Slide the adapter into the holder.
INFORMATION
The exact location of the holder depends on the type of indoor unit. For more
information, see the addendum book for optional equipment of the indoor unit.
5.6 Opening the adapter
5.6.1 About opening the adapter
The average installation procedure does NOT involve opening the adapter.
However, in case you do have to open it, follow below procedure.
DANGER: RISK OF ELECTROCUTION
Before opening the adapter, turn OFF the power to the indoor unit.
5.6.2 To open the adapter
1Remove the screws with a screwdriver.
2×
2Unhook the front casing from the rear casing.

5 | Installation
Installer reference guide
12
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06

6 | Starting up the system
Installer reference guide
13
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
6 Starting up the system
The adapter gets its power from the indoor unit. For the adapter to function, make
sure it is connected to the indoor unit, and the indoor unit is powered on.
After powering on the system, the RUN and AP LEDs light up and go out again after
the adapter is operational. Depending on the system layout, it can take up to 1
minute before the adapter is operational.
INFORMATION
Before starting up the system, make sure that the adapter is closed and properly
mounted to the indoor unit.

7 | Configuration
Installer reference guide
14
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
7 Configuration
To configure the adapter, open the Daikin Residential Controller application on
your mobile device and follow the in-app instructions. The Daikin Residential
Controller application is available on Google Play and the App Store:
http://www.onlinecontroller.daikineurope.com/

8 | Hand-over to the user
Installer reference guide
15
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
8 Hand-over to the user
After having installed and configured the adapter, hand over this installation
manual to the user and make him/her aware of the following safety precautions.
DANGER
▪Do not disassemble, modify, or repair the adapter. This can cause fire, electric
shock, or injury.
▪Do not allow the adapter to get wet or use it when bathing or doing similar
activities with water. This can cause electric shock or fire.
▪Do not use the adapter near medical equipment, or persons using cardiac
pacemakers or defibrillators. This can cause life-threatening electromagnetic
interference.
▪Do not use the adapter near auto-control equipment such as automatic doors or
fire alarm equipment. This can cause accidents due to erroneous equipment
behaviour.
▪In case of abnormal odour or sound, overheating, or smoke coming out of the
adapter, immediately disconnect the indoor unit from its power supply.
Otherwise, this can lead to fire or malfunction. If this happens, consult your
dealer.
▪In case you drop or damage the adapter, disconnect the indoor unit from its
power supply. Otherwise, this can lead to fire or malfunction. If this happens,
consult your dealer.
NOTICE
Do not use the adapter near microwave ovens. This can affect wireless LAN
communications.

9 | Troubleshooting
Installer reference guide
16
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
9 Troubleshooting
9.1 Overview: Troubleshooting
This chapter describes what to do in case of problems. It contains information
about solving problems based on the symptoms listed below.
9.1.1 Symptom: The LEDs do not turn on when the adapter is connected to the unit and the unit
is powered ON
Possible causes Corrective action
The adapter is wired to the wrong
connectors on the indoor unit.
Make sure that the LAN adapter is
correctly connected to the indoor unit.
See the connection guidelines in the
indoor unit manual.
9.1.2 Symptom: The adapter is NOT responding to interaction with the indoor unit
Possible causes Corrective action
The connection cable to connect the
adapter to the indoor unit is
incompatible with the unit.
Make sure you are connected to a
compatible unit. Check the
compatibility of the indoor unit with the
adapter in the indoor unit manual
9.1.3 Symptom: Nothing happens when the adapter is in AP mode
Possible causes Corrective action
The firmware is corrupted. Contact your dealer to report the
firmware issue.

4P624189-1 2020.06
Copyright 2020 Daikin
Verantwortung für Energie und Umwelt