Daikin BRP069B41 User manual

Wireless LAN Connecting Adapter
<BRP069B41> <BRP069B42>
<BRP069B43> <BRP069B44>
<BRP069B45>
Installation Manual
4P481234-1

English 1
Wireless LAN Connecting Adapter
<BRP069B41> Installation Manual
Accessories
Check if the following accessories are included in your package.
Homepage: http://www.onlinecontroller.daikineurope.com
 For details on specications, setting methods, FAQ,
copy of the original declaration of conformity and the
latest version of this manual, see the above homepage.
 Hereby, Daikin Industries Czech Republic s.r.o. declares that the
radio equipment type BRP069B41 is in compliance with Directive
2014/53/EU.
BRP069B41
(A) Wireless
LAN connecting
adapter
(B) Installation
manual
BRP069B42
(A) Wireless
LAN connecting
adapter
(B) Installation
manual
(C) Holder (D) Wire harness (E) Cable tie with
base

English 2
BRP069B43
(A) Wireless
LAN connecting
adapter
(B) Installation
manual
(C) Holder (D) Wire harness (E) Cable tie with
base
(F) Switch box (G) PCB
BRP069B44
(A) Wireless
LAN connecting
adapter
(B) Installation
manual
(C) Holder (D) Wire harness (E) Cable tie with
base
G) PCB
BRP069B45
(A) Wireless
LAN connecting
adapter
(B) Installation
manual
(D) Wire harness
Accessories

English 3
Safety precautions
 The English text is the original instruction. Other languages are
translations of the original instructions.
 The following describes the meanings of pictorial symbols used in this
documentation.
Give this installation manual to the customer when installation is
completed.
 To conduct a test run of the air conditioner, follow the installation
manual for the air conditioner unit.
The protection of appliances marked with this symbol is
ensured by double insulation and does not require a safety
connection to electrical earth (ground).
Warning Situations which could result in
death or serious injury.
Prohibited Follow directions
When installing:
 Request installation by your dealer or a technician.
(Can cause electric shock or fire.)
Always use the accessories and specified parts for installation. Be
sure to follow the directions in this installation manual.
(Can cause the unit to fall, electric shock or fire.)
 Electrical work should be carried out in accordance with the
installation manual and the national electrical wiring rules or code of
practice.
Always turn off the power supply when installing.
(Touching the electrical parts can cause an electric shock.) The main
switch of the installation is at the outdoor unit. Please switch off this
main switch to turn off the power supply.

English 4
Safety precautions
Warning Situations which could result in
death or serious injury.
When using:
 Do not disassemble, modify, or repair.
(Can cause fire, electric shock or injury.)
 Do not handle this product with wet hands.
(Can cause electric shock or fire.)
 Do not allow this product to get wet or use it when bathing
or doing similar activities with water.
(Can cause electric shock or fire.)
 Do not use this product near medical equipment or persons
using cardiac pacemakers or defibrillators. This product may
cause life-threatening electromagnetic interference.
 Do not use this product near auto-control equipment such as
automatic doors or fire alarm equipment.
(Can cause accidents due to erroneous equipment behavior.)
Immediately disconnect the air conditioner power plug if
there is abnormal odor or sound, when it is overheating,
or smoking.
(Can cause fire or malfunction.)
 Request an inspection by your dealer.
 Disconnect the air conditioner power plug if the product
was dropped or the case is damaged.
(Can cause fire or electric shock)
 Request an inspection by your dealer.

English 5
Safety precautions
Caution Situations which could result in
damage or physical injury.
 Do not use this product near a microwave oven.
(This can affect Wireless LAN communications.)
When installing:
Do not install where flammable gas leaks can occur.
(Can cause fire.)
Grip the connector when disconnecting the connecting
cord.
(Otherwise fire or electric shock can occur.)
When using:
Do not use where small children can get access.
(Can cause injuries.)

English 6
Wireless LAN connecting adapter
Disposal requirements
Your product is marked with this symbol. This symbol
means that electrical and electronic products shall not be
mixed with unsorted household waste.
Do not try to dismantle the system yourself: the dismantling
of the product and of other parts must be done by a
qualied installer in accordance with relevant local and
national legislation.
Product and waste must be treated at a specialized trea-
tment facility for re-use, recycling and recovery.
By ensuring correct disposal, you will help to prevent
potential negative consequences for the environment and
human health. Please contact the installer or local authority
for more information.
Main components
RUN lamp (orange)
lights when
connecting to
a router (Wireless
LAN access point).
AP lamp (yellow)
lights when
connected directly to
a smart phone.
SETUP button
Use when
connecting to a
router (Wireless
LAN access point).
MODE button
switches modes
(RUN/AP) when
held down.
POWER button turns
the WLAN adapter
ON or OFF when
pressed

English 7
Main components
Basic parameters:
Frequency range: 2400 MHz–2483.5 MHz
Radio protocol: IEEE 802.11b/g/n
RF channel: 1–11
Output power: 0 dBm~18 dBm
ERP: 17 dBm (11b) / 13 dBm (11g) / 12 dBm (11n)
Power supply: DC 14 V / 100 mA
RF channel: Radio frequency channel
ERP: Effective radiated power
Applicable indoor units
For more details about installation of Wireless LAN adapter and applicable
units visit http://www.onlinecontroller.daikineurope.com.

English 8
Installation
Warning
Always turn off the power supply
when installing. (Touching the
electrical parts can cause an elec-
tric shock.) The main switch of the
installation is at the outdoor unit.
1 Choosing and installation site
The WLAN adapter should be sited in a place where:
The adapter is not in the path of direct sunlight.
The adapter is away from the source of heat or steam.
There is not source of machine oil vapour (this may shorten indoor
unit life).
The adapter is at least 1 m away from any television or radio set
(unit may cause interference with the picture or sound).
Distance between the indoor unit and the WLAN adapter is within
lenght of WLAN cable.
2 Remove the adapter case (upper).
Remove the upper case of the wireless LAN adapter.
Installation
Work
Wireless LAN
connecting adapter
printed circuit board
Adapter case (upper)
Adapter case (lower)

English 9
Installation
3 Attach connecting cord to the product.
Attach the connecting cord connector (white).
 Fasten the connecting cord to the notch in the adapter case (lower).
Installation
Work
Connect the connector to the same color.
Fasten the connecting cord and ensure
that external force is not transmitted.
Connector (white)

English 10
Installation
4 Return the adapter case to its original state.
Snap the top of the upper case
unto the clip at the top of the
lower case and press to close
the box.
Fix the upper adapter case with 2 screws located in accessory set.
Adapter case
(lower) top
portion clip
Adapter case
(upper) top
portion clip
Check that the
connecting cord is
securely fastened.
Installation
Work

English 11
Installation
5 Installation of Wireless LAN adapter
BRP069B41/B45
Install WLAN adapter inside the indoor unit. For more details about
installation of WLAN adapter to your model please visit http://www.
onlinecontroller.daikineurope.com.
BRP069B42/B43/B44
Install the WLAN adapter outside the indoor unit. There are two ways
of installation A and B.
TYPE A
Position of the WLAN adapter on the wall/surface is xed by screws.
In this case double face tapes located in accessory set are not
neccessary to x the holder.
1. Fix the WLAN holder on the wall/surface with 2 screws located in
accessory set.
2. Attach the WLAN adapter to the holder by sliding into it.
For more details about installation of WLAN adapter to your model
please visit http://www.onlinecontroller.daikineurope.com.
Installation
Work
Holes for screws
Holder

English 12
Installation
TYPE B
Position of the WLAN adapter on the wall/surface is xed by double
face tapes. In this case screws located in accessory set are not
neccesary to x the holder.
1. Attach two double face tapes located in accessory set to the back
side of holder as shown below.
2. Fix the WLAN holder on the wall/surface with the double face tapes.
3. Make sure that holder is xed to the wall/surface enough to bear the
WLAN adapter.
4. Attach the WLAN adapter to the holder by sliding into it.
NOTE
Wall/surface should be clean and degreased before attaching of the
WLAN holder by double face tapes.
For more details about installation of WLAN adapter to your model
please visit http://www.onlinecontroller.daikineurope.com
Installation
Work
Double face tape
Holder

English 13
6 Functionality Check
Turn on the power supply and check that the [RUN] lamp of the product
blinks.
Installation Installation
Work
 When turning on the
power, always attach
the adapter case (top).

English 14
Configuration
The customer is responsible for providing the following.
□ Smartphone or tablet PC
(Supported OS: Android 2.3.3 or later; iOS 5.0 or later.)
□Internet line and communicating device
(Modem/router or similar device)
□Wireless LAN access point
□ [Daikin online controller] (No cost)
Installation method of Daikin online controller
For Android Phones
(1) Open the [Google Play].
(2) Search for [Daikin online
controller].
(3) Follow the directions on the
screen to install.
For iPhones
(1) Open the [App Store].
(2) Search for [Daikin online
controller].
(3) Follow the directions on the
screen to install.
Connection
Settings
Section
Refer to
http://www.onlinecontroller.daikineurope.com
for detailed installation instructions.

English 15
Troubleshooting
The following table provides brief descriptions of how to handle trouble or
uncertainties when you install the product or make connection settings.
Refer to the FAQ on the homepage for more details.
When this happens Explanation and where to check
None of the LEDs light → Try to operate the unit with the
infrared remote controller.
→ Turn off the air conditioner
and restart it.
→ Make sure the LEDs are not
disabled in the application.
→ Check the installation
The WLAN adapter
is not visible on the
unit overview screen
("Home" screen) after
the WLAN adapter has
been congured.
→ Check that the power is on.
→ Check that the RUN LED is lit.
→ If the AP LED is lit, press the MODE
button for two seconds to switch to
RUN mode.
→ If the RUN LED is blinking, retry to
connect the WLAN adapter to the
wireless network.
Make sure the WLAN adapter is
close enough to the router (wireless
LAN access point).
→ If the RUN LED is lit, make sure
that the smartphone or tablet is
connected to the same wireless LAN
network as the WLAN adapter.

English 16
When this happens Explanation and where to check
When trying to make
a direct connection to
the adapter (AP mode)
the WLAN adapter is not
visible in the available
Wi-Fi networks list of
the phone/tablet
→ If the AP LED is not lit, press the
"Mode" button for 2 seconds to
switch to AP mode.
→ If the AP LED is blinking, please wait
until the AP LED is lit (approximately
1 minute). The WLAN adapter is still
starting up.
→ If the AP LED is lit, switch to RUN
mode by pressing the MODE button
for two seconds. Now switch back
to AP mode by pressing the MODE
button again for two seconds. This
changes the wireless channel
on which the WLAN adapter
is operating.
Repeat if necessary.
None of the above work → Refer to the FAQ on:
http://www.onlinecontroller.
daikineurope.com
Troubleshooting

4P481234-1 2017.05