Daikin BRP069A41 User manual

Wireless LAN Connecting Adapter
<BRP069A41> Installation Manual
4P359542-1H

English 1
Wireless LAN Connecting Adapter
<BRP069A41> Installation Manual
Accessories
Check if the following accessories are included in your package.
Homepage: http://www.onlinecontroller.daikineurope.com
 For details on specications, setting methods, FAQ,
copy of the original declaration of conformity and the
latest version of this manual, see the above homepage.
 Hereby, Daikin Industries Czech Republic s.r.o., declares that the
BRP069A41 is in compliance with the essential requirements and
other relevant provisions of directive 1999/5/EC.
Model BRP069A41 ※1Affix to the seal attachment on the back face of this sheet and store in a safe place.
(A) Wireless LAN
connecting adapter
(B) Serial number seal
(1 sheet) ※1
(C) Installation manual
(1pc)

English 2
Safety precautions
 The following describes the meanings of pictorial symbols used in this
documentation.
Give this installation manual to the customer when installation is
completed.
 To conduct a test run of the air conditioner, follow the installation
manual for the air conditioner unit.
The protection of appliances marked with this symbol is
ensured by double insulation and does not require a safety
connection to electrical earth (ground).
Warning Situations which could result in
death or serious injury.
Prohibited Follow directions
When installing:
 Request installation by your dealer or a technician.
(Can cause electric shock or fire.)
Always use the accessories and specified parts for
installation. Be sure to follow the directions in this
installation manual.
(Can cause the unit to fall, electric shock or fire.)
 Electrical work should be carried out in accordance with the
installation manual and the national electrical wiring rules or
code of practice.
Always turn off the power supply when installing.
(Touching the electrical parts can cause an electric shock.)
The main switch of the installation is at the outdoor unit.
Please switch off this main switch to turn off the power
supply.

English 3
Safety precautions
Warning Situations which could result in
death or serious injury.
When using:
 Do not disassemble, modify, or repair.
(Can cause fire, electric shock or injury.)
 Do not handle this product with wet hands.
(Can cause electric shock or fire.)
 Do not allow this product to get wet or use it when bathing
or doing similar activities with water.
(Can cause electric shock or fire.)
 Do not use this product near medical equipment or persons
using cardiac pacemakers or defibrillators. This product may
cause life-threatening electromagnetic interference.
 Do not use this product near auto-control equipment such as
automatic doors or fire alarm equipment.
(Can cause accidents due to erroneous equipment behavior.)
Immediately disconnect the air conditioner power plug if
there is abnormal odor or sound, when it is overheating,
or smoking.
(Can cause fire or malfunction.)
 Request an inspection by your dealer.
 Disconnect the air conditioner power plug if the product
was dropped or the case is damaged.
(Can cause fire or electric shock)
 Request an inspection by your dealer.

English 4
Safety precautions
Caution Situations which could result in
damage or physical injury.
 Do not use this product near a microwave oven.
(This can affect Wireless LAN communications.)
When installing:
Do not install where flammable gas leaks can occur.
(Can cause fire.)
Grip the connector when disconnecting the connecting
cord.
(Otherwise fire or electric shock can occur.)
When using:
Do not use where small children can get access.
(Can cause injuries.)

English 5
Disposal requirements
Your product is marked with this symbol. This symbol
means that electrical and electronic products shall not be
mixed with unsorted household waste.
Do not try to dismantle the system yourself: the dismantling
of the product and of other parts must be done by a
qualied installer in accordance with relevant local and
national legislation.
Product and waste must be treated at a specialized
treatment facility for re-use, recycling and recovery.
By ensuring correct disposal, you will help to prevent
potential negative consequences for the environment and
human health. Please contact the installer or local authority
for more information.

English 6
Main components
Wireless LAN connecting adapter
BRP069A41
POWER lamp
(green) lights when
running.
RUN lamp (orange)
lights when
connecting to
a router (Wireless
LAN access point).
AP lamp (yellow)
lights when
connected directly to
a smart phone.
SETUP button
Use when
connecting to a
router (Wireless
LAN access point).
MODE button
switches modes
(RUN/AP) when
held down.
Wireless LAN
connection
adapter
(the product
is inside the
indoor unit)

English 7
Installation
1 Attach the Wireless LAN connection adapter to
indoor unit.
■BRP069A41
Remove the upper front panel from the indoor unit and open the door,
grab the connecting cord with your fingers and pull it out, then remove the
tie-wrap and pull the insulation tube off the connecting cord.
 Refer to your air conditioner‘s installation manual for details on removing
the upper front panel.
Always turn off the power supply when installing.
(Touching the electrical parts can cause
an electric shock.) The main switch of the
installation is at the outdoor unit.
Danger
Open the door Grab the
connecting cord
Tie wrap Insulation tube
Connector
(white)
Installation
Work

English 8
Installation
2 Remove the adapter case (upper).
■BRP069A41
Press a regular screwdriver into the dent between the upper and lower
cases to remove. (Be careful not to damage the case.)
Regular screwdriver
Adapter
case (upper)
Adapter
case (lower)
Wireless LAN
connecting adapter
printed circuit board
Installation
Work

English 9
Installation
3 Attach connecting cord to the product.
■BRP069A41
Attach the connecting cord connector (white).
 Fasten the connecting cord to the notch in the adapter case (lower).
Connector (white)
Connect the connector to the same color.
Fasten the connecting cord and ensure
that external force is not transmitted.
Installation
Work

English 10
Installation
4 Return the adapter case to its original state.
■BRP069A41
Snap the top of the upper case
unto the clip at the top of the
lower case and press to close
the box.
5 Inserting Wireless LAN connection adapter to
indoor unit.
■BRP069A41
Grab the adapter case with your fingers, insert it back into the indoor
unit and close the door. (See picture on the next page)
Adapter case
(lower) top
portion clip
Adapter case
(upper) top
portion clip
Check that the
connecting cord is
securely fastened.
Push until you
hear a click.
Installation
Work

English 11
Installation
6 Functionality Check
■BRP069A41
Turn on the power supply, wait until the initialization is completed
(the lower panel is in the CLOSED position). Open the door, remove the
WLAN adapter and check that the [POWER] lamp for the product lights.
After checking, return the WLAN adapter into the unit and close the door.
Installation
Work
Close this door before
operating the unit. When
turning the power supply
to the unit panels will
open. If the door is not
closed, panel will hit the
door and damage can
occur.
CAUTION
Adapter case Close
 When turning on the
power, always attach
the adapter case (top).

English 12
Configuration
The customer is responsible for providing the following.
□ Smartphone or tablet PC
(Supported OS: Android 2.3.3 or later; iOS 5.0 or later.)
□Internet line and communicating device
(Modem/router or similar device)
□Wireless LAN access point
□ [Daikin online controller] (No cost)
Installation method of Daikin online controller
For Android Phones
(1) Open the [Google Play].
(2) Search for [Daikin online
controller].
(3) Follow the directions on the
screen to install.
For iPhones
(1) Open the [App Store].
(2) Search for [Daikin online
controller].
(3) Follow the directions on the
screen to install.
Connection
Settings
Section
Refer to
http://www.onlinecontroller.daikineurope.com
for detailed installation instructions.

English 13
Configuration
1 Hold down the [WPS] button
on the router (Wireless LAN
access point).
 See the accessory operations manual for
the router (Wireless LAN access point) for
details.
2 Hold down the [SETUP] button on the product
for approximately two seconds.
 The [RUN] lamp on the product blinks more quickly. When the
WLAN adapter and the router (Wireless LAN access point) are
connected, this lamp lights.
3 Connect the smartphone (or tablet PC) and the
router (Wireless LAN access point).
 See the accessory operations manual for the router (Wireless LAN
access point) for details.
4 Tap the [Online controller] that was installed.
 Follow the directions on the screen to make the settings and for
operation.
[Note]
• If an upgrade is available for your adapter, the notification
icon "i" will be displayed on the devices overview screen.
Tap it to upgrade your firmware.
• If you are connecting multiple systems, you can change the
system name in the "More" system menu.
Connection
Settings
Section
WPS button

English 14
Configuration
The SSID and KEY
The [SSID] and [KEY] listed on the (B) serial number seal in
the accessory parts are necessary when connecting the air
conditioner and the smart phone using Wireless LAN.
Affix the (B) serial number seal for the accessory
parts here, and store in a safe place.
Setting Details If connections cannot be done simply using [WPS],
connect using the following method.
1 Hold down the [MODE] button
on the product for approxima-
tely two seconds, then wait for
up to 10 seconds until the [AP]
lamp lights.
2 Directly connect the smartphone (tablet PC)
and adapter to the Wireless LAN without going
through the router (Wireless LAN access
point).
 Select SSID (DaikinAP *****) listed on the "Wi-Fi" (B) serial
number seal using the smartphone settings, or the Wireless LAN
connecting adapter, and enter the KEY.
3 Tap [Online controller] that was installed.
[MODE]
button
Connection
Settings
Section

English 15
Configuration
4 Make the wireless connection settings.
(1) On the Login screen,
tap on [Devices].
(2) On the Devices screen,
tap on [Living Room].
(3) On the Living Room
screen, tap on [More].
(4) On the Settings
screen, tap on
[WLAN Connection].
(5) On WLAN connection
screen, fill in Network
name and Password,
then tap on [Save].
(6) On the WLAN
connection screen, tap
on [Connect] and follow
the instructions on the
smartphone.
1
2
3
*
Connection
Settings
Section

English 16
Configuration
(7) After implementing the setting above and the product and router
(Wireless LAN access point) are connected, the [RUN] lamp will light. If this
blinks for one minute or longer, check the power to the router (Wireless LAN
access point), network name and the password and again from the first
procedure.
* For manual WLAN connection
setting, tap on [Advanced
network setting], turn off
Automatic IP address, fill
in the required information
of your wifi router, then
tap on [Set] and then
tap on [Connect] and
follow the instructions on
the smartphone. Then
continue as in step (7).
5 Connect the smartphone (or tablet PC) and the
router (Wireless LAN access point).
 See the accessory operations manual for the router (Wireless LAN
access point) for details.
See the operations manual posted on our homepage for details.
Connection
Settings
Section

English 17
Troubleshooting
The following table provides brief descriptions of how to handle trouble or
uncertainties when you install the product or make connection settings.
Refer to the FAQ on the homepage for more details.
When this happens Explanation and where to check
None of the lamps light. → Check the installation.
The product is behaving incorrectly.
→ Turn off the air conditioner power
and restart it.
The system
(air conditioner) is not
listed on the system list
screen.
→ Check that the power is on.
→ Check that the RUN/AP lamp is lit.
→ Retry to connect the adapter to the
wireless network.
→ Move the router (wireless LAN
access point) closer to the product
→ It is possible that you are using
a smartphone, access point or
wireless router that is not supported.
→ Make sure that the smartphone or
tablet is connected to the same
wireless LAN network as the WLAN
adapter.
See the homepage for details.
When trying to make a
direct connection to the
adapter ([AP] mode),
the adapter is not visible
in the available Wi-Fi
networks list of the
phone/tablet.
When in [AP] mode, go back to [RUN]
mode and return to [AP] mode by
pressing the [MODE] button for about
2 seconds, this to switch to another
Wi-Fi channel. Repeat if necessary.

1383 4P359542-1H 2014.07