Dakota Digital RLC-49F User manual

Manual # 650788
RLC-49F
Dakota Digital RLC Clock Installation
For 1949-‘50 Ford cars
Your new RLC-49F kit includes:
Installation
1. Remove the original clock by disconnecting the wiring and removing two screws behind the dash.
RLC Operation Manual
RLC Harness
RLC Clock
2x 8-18 x 3/4” Screws

Manual # 650788
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. Secure the new RLC clock to the dash using the two supplied 8-18 x 3/4” screws.
3. Connect the provided RLC harness to the clock and carefully route the other end to the RTX
control box. Refer to the enclosed clock operation manual to complete the RLC clock setup.