Dakota Digital VHX-63F-GAL User manual

Manual #650559A
VHX-63F-GAL
Dakota Digital VHX Instrument Installation
For 1963-‘64 Ford Galaxie
Your new VHX-63F-GAL kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender
Pack
Installation Manuals
1. Remove the stock gauge cluster from the dash. Retain all hardware for reassembly.
Ford Speed
Adapter
VHX Display
6X 6-20 X 5/8”
4X 6-20 X 3/8”
Switch Assembly

Manual #650559A
2. Separate the gauge housings from the bezel so you are left with a bare bezel.
3. With the bare bezel lying face down, fit the VHX system into place and secure it to the bezel using
the four (4) 3/8” screws for the smaller gauges and the six (6) 5/8” screws for the main gauge.
Bare and Clean Bezel
4. Connect the labeled ribbon cables for the auxiliary gauges to their respective ends.
Tach
Volts/Oil
Main

Manual #650559A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
5. Connect the provided CAT5 cable to the rear of the VHX system.
6. The gauge panel is now ready to re-install into the vehicle using stock hardware; take care
when routing the CAT5 cable to the control box mounting location. Refer to the main manual to
complete the VHX installation.