Dakota Digital Retrotech RTX-42F User manual

Manual # 650774
RTX-42F
Dakota Digital RTX Instrument Installation
For 1942-‘48 Ford Car
Your new RTX-42F kit includes:
Ford Sender Adaptor
Control Box
Main Harness
Universal Sender Pack
Installation Manuals
RTX Displays
Switch Assembly
Buzzer
Interconnect
Harness

Manual # 650774
Installation
1. Remove the original gauges from the back side of the dash, retaining the original mounting
hardware for RTX display installation.
2. Insert the two new RTX displays into the dash from behind. Align and center the display faces
before using stock hardware to secure the housings to the dash.
Factory Hardware

Manual # 650774
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
4. Refer to the RTX Main Manual for wiring instructions to complete the RTX installation.
3. Connect the two installed RTX displays with the included interconnect harness, then attach the
provided main harness to the interconnect harness. Attach the optional included buzzer cable to
the back of the RTX system. Carefully route the other end of the main harness to the control box
mounting location.
Buzzer
Interconnect
Harness
Main
Harness