Dakota Digital VHX-90F-MUS User manual

Manual # 650475A
VHX-90F-MUS
Dakota Digital VHX Instrument Installation
For 1990-’93 Ford Mustang
Your new VHX-90F-MUS kit includes:
Control Box
Universal Sender Pack
Installation Manuals
VHX Display
Ford Speed
Sensor Plug
(1) 36” CAT5 Cable

Manual # 650475A
Installation
2. Remove the stock gauge cluster by removing the four screws holding the system to the dash
structure; be sure to keep these screws as they will be re-used. Now is a good time to clean the
bezel and dash pads.
3. Connect the CAT5 cable to the back of the VHX cluster as it is installed into the dash, take care
when routing the other end of this cable to the control box mounting location. Mount the VHX
cluster to the dash structure using the four factory screws.
1. Remove the stock gauge bezel from the dash and save all hardware for reassembly.

Manual # 650475A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4. Refer to the main manual for wiring instructions to complete the VHX installation.