Dakota Digital VHX-66L User manual

Manual #650620A
VHX-66L
Dakota Digital VHX Instrument Installation
For 1966-‘69 Lincoln Continental
Your new VHX-66Lkit includes:
Installation
Control Box
CAT5 Cable
Universal Sender
Pack
Installation Manuals
Ford Speed Adapter
VHX Display
(2) 6-32 X 5/8” Screws
(2) 6-32 X 1/4” Screws
(3) 8-32 X 7/8” Screws
1. Remove the stock gauge cluster from the dash. Retain all hardware for reassembly.
(5) 6-20 X 5/8” Screws
Switch Assembly

Manual #650620A
4. Remove the speedometer gauge face.
2. Remove the lower panel on the gauge bezel. Retain all hardware for reassembly.
3. Remove the odometer assembly.

Manual #650620A
6. Separate the speedometer face from the gauge trim.
5. Remove the speedometer assembly so you are left with a bare gauge housing. The blue bulb
shields can be left in place or removed if desired.
7. Mount the VHX gauge to the gauge trim using the provided three (3) 8-32 X 7/8” screws.

Manual #650620A
8. Attach the assembled gauge trim to gauge housing using five (5) 6-20 X 5/8” screws.
9. Mount the VHX switch assembly to the gauge housing using the provided two (2) 6-32 X ¼” screws.
10. Connect the provided switch harness to the back of the VHX switch assembly and refer to the
wiring diagram.

Manual #650620A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
12. Reinstall the lower panel and the dash is now ready to re-install into the vehicle using stock
hardware. Take care when routing the CAT5 cable and switch harness to the control box mounting
location. Refer to the main manual to complete the VHX installation.
11. Connect the provided CAT5 cable to the back of the VHX gauge.