Dakota Digital HDX-70C-CAM User manual

Manual # 650571A
HDX-70C-CAM
Dakota Digital HDX Instrument Installation
For 1970-‘81 Chevy Camaro
Your new HDX-70C-CAM kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
HDX Display
Buzzer
1. First remove the four screws holding the bezel to the dash. These four screws will be re-used for
re-assembly.

Manual # 650571A
3. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system.
Buzzer Connector
2. Remove the four screws holding the gauges into the dash. These screws will be re-used for the
VHX gauge installation.

Manual # 650571A
4. Secure the VHX system to the dash with the original four screws.
5a. Align the bezel over the gauges. Watch carefully so you don’t scratch or damage the lens.
5b. The HDX system
should align tightly
and the lens should
sit flush with the
bezel.

Manual # 650571A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Secure the bezel to the dash with the four original screws. Refer to the main manual for wiring
instructions to complete the HDX installation.