Dakota Digital VHX-61F-PU User manual

Manual #650540A
VHX-61F-PU
Dakota Digital VHX Instrument Installation
For 1961-‘66 Ford Pickup
Your new VHX-61F-PU kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender
Pack
Installation Manuals
1. Remove the stock gauge panel from the dash as well as the four screws holding the gauge in place.
Retain all hardware for reassembly.
Ford Speed
Sender
VHX Display
Switch Assembly

Manual #650540A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect the provided CAT5 cable to the
rear of the VHX system.
2. Secure the VHX system to the gauge panel using the four screws from disassembly.
4. The gauge panel is now ready to re-install into the vehicle using stock hardware; take care
when routing the CAT5 cable to the control box mounting location. Refer to the main manual to
complete the VHX installation.