Dakota Digital RLC-40F User manual

Manual # 650698
RLC-40F
Dakota Digital RLC Clock Installation
For 1940 Ford Car
Your new RLC-40F kit includes:
Installation
4X 5/8” length Screws
Harness
Installation Manual
RLC Clock
1. Remove the four screws holding the clock to the glove box on the back side.

Manual # 650698
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4. Connect the clock harness to the back of the clock. Route the other end of the harness to
the RTX control box and refer to the Operation Manual to complete the clock setup.
2. Remove the clock assembly and rear housing.
3. Carefully position the new clock from the backside to avoid scratching the chrome. With the
four screws provided, secure the new clock to your original glove box.