Dakota Digital VHX-40F User manual

Manual # 650403B
VHX-40F
Dakota Digital VHX Instrument Installation
For 1940 Ford Car
Your new VHX-40F kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender Pack
Installation Manuals
VHX Display
1. Remove the stock cluster from the dash and be sure to retain all hardware for reassembly.
Ford Adapter
Switch Assembly

Manual # 650403B
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. Remove the protective tape from the clear lens.
3. Connect the CAT5 cable to the system as
the VHX cluster is installed into the dash.
Watch carefully so you don’t scratch or
damage the lens or bezel, and take care
when routing the CAT5 cable to the control
box location.
4. Re-install the cluster into the vehicle using stock hardware and refer to
the main manual for wiring instructions to complete the VHX installation.