dallmeier IPS 10000 Guide

008290 | REV. 2.0.0 | 2021-02-18
COMMISSIONING
IPS 10000

Copyright © 2021 Dallmeier electronic GmbH & Co.KG
The reproduction, distribution and utilization of this document as well as the communication
of its contents to others without express authorization is prohibited.
Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, utility model or design.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those
not caused by intention or gross negligence of the manufacturer.
Figures in this document may dier from the actual product.
Specications subject to change without notice. Errors and misprints excepted.
All trademarks identied by ® are registered trademarks of Dallmeier.
Third-party trademarks are named for information purposes only.
Dallmeier respects the intellectual property of third parties and always attempts to ensure the complete identication of
third-party trademarks and indication of the respective holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective
trademark is unprotected.
This product may include software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org)
and cryptographic software written by Eric Young ([email protected]).

3
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
6× 32×
1×
2×
2×
2×

4COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier

5
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
Table of Contents
1 Validity 6
2 Documents 7
This Document 7
Other Applicable Documents 7
3 Typographical Conventions 9
4 Approvals/Certications 11
5 Safety Instructions 12
6 General Notes 16
Transportation and Packaging 16
Warranty 16
Appropriate Use 16
7 Requirements 17
Power Supply 18
Earthing 19
8 Rack Installation 21
Dimensions 21
Preparation 22
Installation 23
9 HDD Installation 25
10 Display 30
11 Connections 32
12 Commissioning and Remote Login 34
Commissioning 34
Remote Login 34
13 Specications 36
14 Maintenance, Testing and Cleaning 38

6COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
1 Validity
This document is valid for the SeMSy® Appliance IPS 10000.
For simplicity, the term “appliance” or “recorder” is occasionally used in the
following.
Illustrations in this document may dier from the actual product.

7
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
2 Documents
The product documentation for the device includes various documents that
are printed and/or provided in digital form, for example via the website
www.dallmeier.com.
Read the entire product documentation for the device carefully and com-
pletely before using the device. Always observe the instructions, notes
and warnings contained as well as the technical data in the currently valid
product specication.
Keep all documents in a legible condition and in a suitable place for future
reference.
Regularly check the website www.dallmeier.com for possible updates to the
product documentation.
This Document
Commissioning
The document “Commissioning” (this document) contains detailed descrip-
tions on installation, connection and commissioning of the device as well as
safety instructions and general notes.
The target audience of this document is trained system integrators.
Other Applicable Documents
Specication
The document “Specication” contains detailed technical data, features and
characteristics of the device.
The target audience of the document is trained system integrators.

8COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
Conguration - SeMSy® Recording Server
The document “Conguration - SeMSy® Recording Server” contains detailed
descriptions for the conguration of the pre-installed recording software
SeMSy® Recording Server.
The target group of the document are trained system integrators (installers
of video security systems).
Operation – SeMSy® Recording Server
The document “Conguration - SeMSy® Recording Server” contains detailed
descriptions for the conguration of the pre-installed recording software
SeMSy® Recording Server.
The target group of the document are trained system integrators (installers
of video security systems).

9
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
3 Typographical Conventions
This document may contain various warning words and symbols that indi-
cate potential sources of danger:
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
ATTENTION
ATTENTION is used to indicate practices that do not present a risk of per-
sonal injury and identies actions to prevent equipment and/or property
damage due to improper setup, mounting, wiring, operation, congura-
tion, or maintenance of the equipment.

10 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
For reasons of clarity and readability, various text formatting elements and
types of emphasis are used in this documentation:
Instructions are indicated by arrows (➡).
➡Always carry out instructions for action in the sequence described.
“Expressions” in quotation marks usually refer to individual components of
the device (housing parts, mounting elements, connections/interfaces, etc.)
or to operating elements of the web-based graphical user interface of the
device (menu items, buttons, etc.).
Paragraphs in italics provide information on basics, specics, and e-
cient procedures, as well as general recommendations.

11
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
4 Approvals/Certications
At the time of writing, the following approvals/certications were available
for the device:
• CE
• FCC
• RCM
• UL
• LCG Forensics
US Technical Standards
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequency energ and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Note possible updates at www.dallmeier.com.

12 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
5 Safety Instructions
Only use the device if it is technically in proper working condition and for
the intended purpose while keeping safety and potential dangers in mind.
• Qualied Personnel
Mounting, connection, commissioning and conguration of the device
may only be performed by trained specialist personnel.
This also applies to maintenance, testing and repair of the device in
accordance with the locally applicable regulations (regional and coun-
try-specic legal regulations and standards), such as the regulations of
the DIN VDE 0701-0702 series of standards (VDE 0701-0702: “Testing after
repair, modication of electrical equipment - Periodic testing of electrical
equipment - General requirements for electrical safety”).
• Regulations
The use of video and audio surveillance systems is, in general, strictly
regulated.
Inform yourself about the currently valid laws and regulations regarding
data, worker and environmental protection before using the device and
ensure compliance with them.
• System Components
Only use internal components that have been tested and approved by
Dallmeier.
Inappropriate internal components may cause malfunctions, damages
and data loss and may result in the loss of warranty.
• Modications
Do not modify the hardware or software in a way that has not been test-
ed and approved by Dallmeier.
Inappropriate modications may cause malfunctions, damages and data
loss and may result in the loss of warranty.

13
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
• Documentation
The product documentation for the device includes various documents
that are printed and/or provided in digital form, for example via the web-
site www.dallmeier.com.
Read the entire product documentation for the device carefully and com-
pletely before using the device. Always observe the instructions, notes
and warnings contained as well as the technical data in the currently
valid product specication. Keep all documents in a legible condition and
in a suitable place for future reference.
Regularly check the website www.dallmeier.com for possible updates to
the product documentation.
• Condensation Water
If the device is brought from a cold to a warm environment, resulting
condensation water may cause malfunctions and damages.In this case,
wait (up to 8 hours) until the device has reached room temperature be-
fore commissioning.
• Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages)
and devices (protection against over-voltages) as well as for the immuni-
ty of information and communication technolog equipment to electro-
magnetic interferences (EMI), all protective measures, which are specied
by the currently valid DIN, VDE and ISO standards and which provide for
a standard-compliant earthing and a correct equipotential bonding of
electrical and electronic devices, are mandatory and must be fullled by
all means.
• Lightning Storms
To avoid damage to the device by electrical surge during lightning storms,
all protective measures, which are specied by the currently valid DIN,
VDE and ISO standards and which provide for a standard-compliant
lightning protection equipotential bonding, are mandatory and must be
fullled by all means.

14 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
• Operating Conditions
Unfavorable operating conditions may shorten the life of the device and
may cause malfunctions, damages and data loss and may result in the
loss of warranty.
Observe the specications given in the technical data, the operating con-
dition requirements and the maintenance instructions.
• Vibrations
Vibrations can lead to malfunctions and damage. The device must not be
moved during operation.
• Foreign Bodies
If objects or liquids get into the device, immediately disconnect the mains
voltage to the device (e.g. by switching o the circuit breaker associated
with the circuit).
Inform your responsible sales partner.
• Smell of burning near the device
If you notice a smell of burning or smoke developing near the device, im-
mediately disconnect the mains voltage to the device (e.g. by switching
o the circuit breaker associated with the circuit).
Inform your responsible sales partner.
• Opening the device
The device may only be opened by trained personnel and in a de-ener-
gized state for commissioning, testing, maintenance and repair.

15
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
• Disposal
Do not dispose of electrical and electronic devices in household waste.
Disconnect the mains voltage to the device (e.g. by switching o the
circuit breaker associated with the circuit).
Remove all connected devices.
Return the device to your responsible sales partner.

16 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
6 General Notes
Transportation and Packaging
Dallmeier is not responsible for any damage resulting from unprofessional/
improper transportation.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packag-
ing suciently protects the device against damage, moisture, heat and cold.
Warranty
The terms and conditions valid at time the contract was signed shall apply.
Appropriate Use
The IPS 10 000 appliance in the MK2 revision combines the recording
software SeMSy® Recording Server (V10) with a reliable and high-perfor-
mance server hardware. Perfectly matched components ensure high storage
speed and allow the recording of up to 120 high-resolution video streams at
a frame rate of 30fps. The integrated RAID 6 storage system already pro-
vides a high storage capacity and can be expanded by an external RAID 6
JBOD system.

17
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
7 Requirements
The device is designed for mounting and operation in a 19’’ standard rack
with active ventilation. The required rails are included in the scope of deliv-
ery.
Rack Installation
➡Ensure a free space of min. 60 cm at the front of the rack to be able to
open the door completely.
➡Ensure a free space of min. 75 cm at the rear of the rack to allow su-
cient air circulation and access for maintenance.
➡Place the rack in a location with restricted access to (equipment room or
server room).
➡Ensure that the rack is stable and can support the weight of the installed
equipment.
Device Installation
➡Mount heavy equipment in the lower area of the rack.
➡Note that the temperature in the upper area of the rack can be higher
than in the lower area.
➡Plan a space between the devices to allow better air circulation.
➡Ensure sucient air circulation by leaving a free space of 10 cm at the
front and rear side of the device.
Operation in the Rack
➡Keep the doors of the rack closed in order to ensure a sucient air circu-
lation.
Secure Earthing
➡Ensure anytime a proper grounding, preferably through a direct ground-
ing of the rack.

18 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
Power Supply
Operate the device with 115/230 V AC ±5%, 50/60 Hz.
Use an uninterruptible power supply (UPS) to protect the device from volt-
age spikes and to keep it in operation in case of power failure.
ATTENTION
Danger due to dicult separation from the circuit
The plug of the supply line serves as a separator from the supply circuit.
➡Use an outlet installed close to the device.
➡Make sure the outlet is easily accessible.

19
COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
Earthing
ATTENTION
Damage to the recorder and connected peripheral devices or serious mal-
functions due to missing or improper grounding.
Damage to electronic components due to lightning or overvoltages as well
as malfunctions due to electromagnetic interference
➡Carry out all protective measures prescribed in accordance with cur-
rently valid DIN, VDE and ISO standards to ensure standard-compliant
grounding and correct (lightning protection) equipotential bonding of
the device and all connected peripheral devices to ensure the safety of
the devices (protection against lightning strikes and surges) and their
immunity to electromagnetic interference.
➡Observe the locally applicable regulations (regional and country-spe-
cic legal regulations and standards) with regard to the prescribed
minimum cross-sections of the grounding cables used.

20 COMMISSIONING – IPS 10 000 | REV. 2.0.0 | © 2021 Dallmeier
WARNING
Electric shock due to live exposed electrical components as well as missing
or improper grounding
Danger to life or risk of serious injury
➡All work on the device (including the connection of peripheral devices)
may only be carried out by qualied personnel and in a de-energized
state (check that no voltage is present).
➡Perform all measures prescribed by currently valid DIN, VDE and ISO
standards to ensure that the device is grounded in accordance with the
standards in order to ensure the safety of personnel (protection against
dangerous touch voltages).
➡Observe the locally applicable regulations (regional and country-specic
legal regulations and standards) with regard to the prescribed minimum
conductor cross-sections for the electrical supply line (mains connection
cable).