dallmeier DDZ4120HD-SMDDZ4130HD-SMDDZ4220HD-SMDDZ4230HD-SM Guide

005921 / 1.0.2 / 2016-12-20
DDZ4X(20)(30)HD-SM
Commissioning
English

Copyright © 2016 Dallmeier electronic GmbH & Co.KG
The reproducon, distribuon and ulizaon of this document as well as the communicaon
of its contents to others without express authorizaon is prohibited.
Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, ulity model or design.
Figures in this document may dier from the actual product.
We reserve the right to make technical modicaons.
The manufacturer accepts no liability for damage to property or pecuniary damages arising
due to minor defects of the product or documentaon, e.g. print or spelling errors, and for
those not caused by intenon or gross negligence of the manufacturer.
All trademarks idened by ® are registered trademarks of Dallmeier electronic.
Third-party trademarks are named for informaon purposes only.
Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure the complete iden-
caon of third-party trademarks and indicaon of the respecve holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respecve
trademark is unprotected.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 3
Contents
1 Validity 4
2 Documents 4
This Document 5
Other Applicable Documents 5
3 TypographicalConvenons 6
4 SafetyInstrucons 8
5 General Notes 11
Scope of Delivery 11
Transportaon and Packaging 11
Warranty 12
Approvals/Cercaons 12
Appropriate Use 12
Operaon 13
6 Requirements 13
Ambient Condions 13
Power Supply 14
7 Maintenance 15
8 InstallaonandCommissioning 16
9 Pin Assignment 41
Power In 41
LAN / PoE 42
Audio Out/In 42
Alarm In / Relay Out / RS485 43
10 TechnicalSpecicaons 44
11 Dimensions 46

DDZ4X(20)(30)HD-SM
4
www.dallmeier.com
1 Validity
This document applies to the following devices:
• DDZ4120HD-SM
• DDZ4130HD-SM
• DDZ4220HD-SM
• DDZ4230HD-SM
Figures in this document may dier from the actual product.
2 Documents
The product documentaon contains several documents which are
included in the scope of delivery in a printed form and/or on a digital
medium.
Read all documents included in the scope of delivery carefully and thor-
oughly before using the device.
Always follow the instrucons, notes and warnings and observe the tech-
nical specicaons in the product data sheet.
Keep all documents in legible condion and in a suitable locaon for
future reference.
Regularly check the website www.dallmeier.com for the latest updates on
product documentaon.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 5
This Document
Commissioning
The document “Commissioning” (this document) contains detailed de-
scripons on installaon, connecon and commissioning of the device as
well as safety instrucons and general notes.
The target audience of this document is trained system integrators.
Other Applicable Documents
Data Sheet
The document “Data Sheet” contains detailed technical specicaons,
features and characteriscs of the device.
The target audience of the document is trained system integrators.
Conguraon
The document “Conguraon” contains detailed descripons on the con-
guraon of the device.
The target audience of the document is trained system integrators.

DDZ4X(20)(30)HD-SM
6
www.dallmeier.com
3 TypographicalConvenons
This document may contain various warning words and symbols that
indicate potenal sources of danger:
DANGER
DANGER indicates a hazardous situaon which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a hazardous situaon which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situaon which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE is used to address pracces not related to physical injury.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 7
For reasons of clarity and readability, various text formang elements
and types of emphasis are used in this documentaon:
Instrucons are indicated by arrows (➡).
➡Always carry out instrucons one aer the other in the sequence
described.
“Expressions” in quotaon marks generally indicate a control element
on the device (switches or labels) or on its user interface (buons, menu
items).
Paragraphs in italics provide informaon on basic principles, special
features and ecient procedures as well as general recommenda-
ons.

DDZ4X(20)(30)HD-SM
8
www.dallmeier.com
4 SafetyInstrucons
Only use the device if it is technically in proper working condion and for
the intended purpose while keeping safety and potenal dangers in mind.
• QualiedPersonnel
The installaon, mounng, connecon, commissioning and congura-
on of the device may only be carried out by qualied personnel.
This also applies to the maintenance, tesng and repair, whereat the
regulaons of the DIN VDE 0701 series of standards (repair, modica-
on and inspecon of electrical appliances) must be followed.
• Regulaons
The use of video and audio surveillance systems is, in general, strictly
regulated.
Inform yourself about the currently valid laws and regulaons regarding
data, worker and environmental protecon before using the device and
ensure compliance with them.
• System Components
Only use internal components that have been tested and approved by
Dallmeier.
Inappropriate internal components may cause malfuncons, damages
and data loss and may result in the loss of warranty.
• Modicaons
Do not make any modicaons to the hardware or soware that have
not been tested and approved by Dallmeier.
Inappropriate modicaons may cause malfuncons, damages and
data loss and may result in the loss of warranty.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 9
• Documentaon
Read the documents included in the delivery carefully and thoroughly.
Always observe the contained instrucons, notes and warnings.
The product documentaon contains several documents which are
included in the scope of delivery in a printed form and/or on a digital
medium.
Keep all documents in legible condion and in a suitable locaon for
future reference.
• CondensaonWater
If the device is brought from a cold to a warm environment, resulng
condensaon water may cause malfuncons and damages.
In this case, wait (up to 8 hours) unl the device has reached room
temperature before commissioning.
• Earthing&EquipotenalBonding
For the safety of persons (protecon against dangerous contact volt-
ages) and devices (protecon against over-voltages) as well as for the
immunity of informaon and communicaon technology equipment to
electromagnec interferences (EMI), all protecve measures, which are
specied by the currently valid DIN, VDE and ISO standards and which
provide for a standard-compliant earthing and a correct equipotenal
bonding of electrical and electronic devices, are mandatory and must
be fullled by all means.
• Lightning Storms
To avoid damage to the device by electrical surge during lightning
storms, all protecve measures, which are specied by the currently
valid DIN, VDE and ISO standards and which provide for a standard-
compliant lightning protecon equipotenal bonding, are mandatory
and must be fullled by all means.

DDZ4X(20)(30)HD-SM
10
www.dallmeier.com
• OperangCondions
Unfavorable operang condions may shorten the life of the device and
may cause malfuncons, damages and data loss and may result in the
loss of warranty.
Observe the specicaons given in the technical data, the operang
condion requirements and the maintenance instrucons.
• ForeignBodies
If objects or liquids get into the device, immediately disconnect it from
the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
• BurntSmell
If you noce burnt smell or a formaon of smoke coming from the
device, immediately disconnect it from the power supply (pull out the
power plug).
Contact the sales partner responsible for your area.
• Opening
The device may only be opened by qualied personnel for commission-
ing, inspecon, maintenance and repair.
• Disposal
Do not dispose waste electrical and electronic equipment into the
household trash.
Disconnect the device from the power supply.
Remove all connected devices.
Return the device to your respecve sales partner.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 11
5 General Notes
Scope of Delivery
Included in the standard scope of delivery is:
• 3× Chipboard screw Ø 4.5 × 40 mm
(fully threaded, pan head, cross recessed PZ 2)
• 3× Expansion nylon plug S6 (drill hole diameter: 6 mm,
min. drill hole depth: 40 mm, anchor length: 30 mm)
• 1× Mounng ring
• 2× Hexagon socket set screw with cone point DIN 914 M 2.5 × 4 mm
• 1× Hexagon socket screw key (wrench size 1.3)
• 1× Weidmüller BL 3.50/02/180 SN (Power In)
• 1× Weidmüller B2L 3.50/12/180 SN (Alarm In / Relay Out / RS485)
• Documentaons (published in print and/or on DVD-ROM)
The scope of delivery may dier depending on the ordered equip-
ment, device variant or country of desnaon.
The funconal range of the device depends on the ordered equip-
ment or device variant and may dier from this document’s content.
Certain funcons and features may require the purchase of an ad-
dional license.
TransportaonandPackaging
Store the original packaging for later transportaon.
Dallmeier is not responsible for any damage resulng from unprofes-
sional/improper transportaon.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used pack-
aging suciently protects the device against damage, moisture, heat and
cold.

DDZ4X(20)(30)HD-SM
12
www.dallmeier.com
Warranty
The terms and condions valid at me the contract was signed shall apply.
Approvals/Cercaons
The following approvals/cercaons were valid for the device at the
me of this document’s compilaon:
• CE, FCC, DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note(USA)
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protecon against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instrucon manual,
may cause harmful interference to radio communicaons. Operaon of this equipment
in a residenal area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
AppropriateUse
The product described in this document is a HD PTZ network dome
camera that is intended for the use in advanced IP based 24-hour video
surveillance applicaons.
It is designed for indoor surface-mount installaons and can be powered
via PoE (Power over Ethernet) or supplied with a separate power supply
unit.
NOTICE
The product described in this document is exclusively designed for
indoor installaons.
An outdoor installaon is prohibited and may result in malfuncon,
damage, data loss and loss of warranty.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 13
Operaon
• If the device or the cables connected to the device are located near
sources with strong radiaon, the video image may be distorted.
• The device is equipped with automac gain control (AGC). In low-light
condions the image may be altered (e.g. noise). However, this is not a
malfuncon.
• The quality of the video image depends on the lighng condions and
the used monitor.
• The accuracy of the automac white balance (AWB) algorithm depends
on the used lighng. Mixed light (consisng of arcial light and day-
light) may cause color distorons (inaccurate color reproducon).
• Poor lighng can lead to an incorrect white balance.
6 Requirements
AmbientCondions
Unfavorable local condions may shorten the lifeme of the product and
may cause malfuncons or damages.
➡Do not install/operate the device in places
• with a large amount of dust and dirt,
• with steam or oil vapors (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiaon (e.g. radio transmiers, magnec
elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insucient air venlaon (e.g. closed cabinet).

DDZ4X(20)(30)HD-SM
14
www.dallmeier.com
Power Supply
The device can be powered via PoE (Power over Ethernet) or supplied
with a separate power supply unit.
For further informaon, see chapter “Technical Specicaons” on page
44 and read the current technical product data sheet of the respecve
device.
WARNING
Electricshockhazard
Danger of death or serious injury
➡Always disconnect the separate power supply unit from the mains
socket (pull out the power plug) before connecng or disconnect-
ing the device.
Over-voltage(electricalsurge)
Danger of death or serious injury as well as damage to the device
➡To ensure the safety of persons (protecon against dangerous
contact voltages) and to prevent damage to the device caused by
electrical surge, a standard-compliant earthing of the device is
mandatory.
NOTICE
Damagetothedeviceresulngfromimproperpowersupply
➡Always ensure the correct polarity when using a separate power
supply unit.
➡Do not use PoE (Power over Ethernet) and a separate power sup-
ply unit simultaneously.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 15
7 Maintenance
The device may only be opened by qualied personnel for commission-
ing, inspecon, maintenance and repair.
NOTICE
Damagetothesurfacecoangofthedomecover/bubble
➡Always use the provided pair of gloves to prevent ngerprints.
• Do not touch the dome cover/bubble with bare ngers.
Cleaning
If it is necessary to clean the device, observe the following notes:
NOTICE
Damagetothesurfacecoangofthedevice
➡Clean the housing (outside) with a so, dry and anstac cloth.
• Do not use detergents.
• Do not use microber cleaning cloths.
➡Clean the plasc bubble with water and some dishwashing agent
using a so, non-linng cloth or sponge.
• Do not rub the plasc bubble with a dry cloth.
• Do not use common glass cleaners.
• Do not use microber cleaning cloths.
• Avoid excessive rubbing.
• Dry gently with a clean dry cloth (e.g. glasses cleaning cloth) to
avoid scratching the surface coang.

DDZ4X(20)(30)HD-SM
16
www.dallmeier.com
8 InstallaonandCommissioning
The installaon and commissioning of the device may only be carried out
by qualied personnel.
WARNING
Falling device/objects or collapsing ceiling
Danger of death or serious injury to the head
➡Observe the manufacturer’s instrucons about the maximum
adequate carrying capacity of the supporng structure.
➡Always use screws suitable for your ceiling material.
➡Always use the correct type of screw anchor for your ceiling type:
• Plasc screw anchors for solid wall material (concrete/brick)
• Toggle bolt style anchors for drywall / hollow wall type (plaster)
The following tools/accessories are required for the installaon:
• Hexagon socket set screw with cone point (included in delivery)
• Hexagon socket screw key (wrench size 1.3; included in delivery)
• Mounng ring (included in delivery)
• Marking tool (e.g. awl or pencil)
• Drilling machine (for expansion nylon plug S6)
• 3× Screw anchor (included in delivery)
• 3× Mounng screw (included in delivery)
• Screwdriver for cross recessed mounng screws

DDZ4X(20)(30)HD-SM
www.dallmeier.com 17
❶
➡First, make sure that the locking screw of the housing ring is not
already screwed in to avoid damaging the thread of the housing
ring during step ❷.
➡If necessary, loosen (counter-clockwise) the locking screw of the
housing ring.
• For loosening the locking screw, use the supplied hexagon socket
screw key (wrench size 1.3).
• Do not fully unscrew the locking screw in order to avoid losing
the screw.
Locking screw (included in delivery):
Hexagon socket set screw with cone point
DIN 914 M 2.5 × 4 mm

DDZ4X(20)(30)HD-SM
18
www.dallmeier.com
❷
➡Unscrew (counter-clockwise) and remove the housing ring.
• Do not touch the bubble with bare ngers.
Always use the provided pair of gloves to prevent ngerprints.

DDZ4X(20)(30)HD-SM
www.dallmeier.com 19
➡Carefully remove the PTZ dome camera from the housing base
while pushing/compressing both locking tabs.
❸

DDZ4X(20)(30)HD-SM
20
www.dallmeier.com