dallmeier Colour Picodome DDF3000APV Operating and maintenance instructions

Installation and Configuration
Rev. 3.0.0 / 080318
English
Colour Picodome®
DDF3000APV

DDF3000APV
2Dallmeier electronic
Copyright © Dallmeier electronic GmbH & Co.KG
Allrightsreserved.Thisdocumentmaynotbecopied,photocopied,reproduced,translated,transfer-
red to an electronic medium or converted to a machine-readable form either whole or in part
without first receiving written permission from Dallmeier electronic GmbH & Co.KG.
We reserve the right to make technical modifications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due to
minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross neglegence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
D 93051 Regensburg, Germany
www.dallmeier-electronic.com
[email protected]

DDF3000APV
3Dallmeier electronic
Table of content
1 About this document.................................................................................. 4
1.1 Validity .......................................................................................................... 4
1.2 Documentation on the device ....................................................................... 4
1.3 Convention ................................................................................................... 4
2 Safety instructions ..................................................................................... 6
3 General notes.............................................................................................. 8
3.1 Scope of delivery.......................................................................................... 8
3.2 Transportation and packaging....................................................................... 8
3.3 Appropriate use............................................................................................. 8
3.4 Performance features ................................................................................... 8
3.5 Certificates.................................................................................................... 9
3.6 Warranty ....................................................................................................... 9
4 Notes on operating the camera ............................................................... 10
5 Views and connection assignment......................................................... 11
5.1 Views .......................................................................................................... 11
5.2 Connection assignment .............................................................................. 12
6 Installation and Commissioning ............................................................. 13
6.1 Requirements at the installation site........................................................... 13
6.2 Mounting flush mount version..................................................................... 13
6.3 Mounting surface mount version................................................................. 16
7 Preparing to configure ............................................................................. 19
7.1 UTC Remote Box ....................................................................................... 19
7.2 DMS Recorder ............................................................................................ 20
7.3 PView.......................................................................................................... 20
8 Configuration ............................................................................................ 21
8.1 Presets........................................................................................................ 21
8.2 Basic Functions .......................................................................................... 23
8.2.1 Camera ID .................................................................................................. 23
8.2.2 CCTV System ............................................................................................. 23
8.2.3 Horizontal Flip............................................................................................. 24
8.2.4 Lens Select ................................................................................................. 24
8.2.5 Color ........................................................................................................... 24
8.2.6 Day / Night Setup........................................................................................ 25
8.3 Image Functions ......................................................................................... 25
8.3.1 Progressive Scan........................................................................................ 25
8.3.2 Backlight ..................................................................................................... 26
8.3.3 Digital Zoom ............................................................................................... 27
8.3.4 White Balance ............................................................................................ 27
8.4 Exit Menu.................................................................................................... 28
9 Appendix ................................................................................................... 29
10 Technical data ........................................................................................... 30

DDF3000APV
4Dallmeier electronic
1 About this document
1.1 Validity
This document applies to the DDF3000APV colour Picodome®. It has been produced on the
basis of version 1.7 (software).
1.2 Documentation on the device
Commissioning
The quick guide headed “Commissioning“ lists the most important steps for the connection
and commissioning of the device.
Installation and Configuration (this document)
The document entitled “Installation and Configuration“ contains detailed descriptions of the
installation, connection, commissioning and configuration of the device. Safety instructions,
general notes and technical data are additionally provided.
Thetargetaudience isexclusivelyspeciallytrainedandauthorizedprofessionals(“installers“).
Storage of documentation
Store the documents in an accessible location near the product. Keep the documents in
readable condition. Pass on all documents to each successive owner or user of the device.
1.3 Convention
This document contains various warning words and symbols that indicate potential sources
of danger. Various symbols and formats are used to maintain the clarity of the document.
DANGER
The warning word DANGER denotes an immediate danger
that may cause death or serious injury if it is not averted.
WARNING
The warning word WARNING denotes a possible danger that
may cause death or serious injury if it is not averted.
CAUTION
The warning word CAUTION denotes a possible danger that
may cause minor injury if it is not averted.

DDF3000APV
5Dallmeier electronic
IMPORTANT
The word IMPORTANT denotes information for preventing
damage, incorrect configurations or incorrect actions.
NOTE
A NOTE offers information on principles, special features and
efficient procedure as well as general recommendations.
Expression Expressions in bold and italics generally indicate a control
elementonthe device (switches orlabels)oronitsuserinterface
(buttons, menu entries).

DDF3000APV
6Dallmeier electronic
2 Safety instructions
Only use this unit if it is technically in proper working order, to the intended purpose and
whilekeepingsafety and potential dangersinmind.Havemalfunctionsordamages eliminated
immediately!
Appoint a professional
Installation, mounting, connection, start-up and configuration of the unit may only be carried
out by trained and authorized professionals (installers).
Unless otherwise expressly specified, this also applies to the maintenance, testing and
repair. In doing so the regulations of the DIN VDE 0701 series of standards (repair,
modification and inspection of electrical appliances) must be followed in addition.
Read and pay attention to the documents
Carefully and completely read the documents included in delivery. Always pay attention to
the provided instructions, notes and warnings.
Regulations surveillance systems
The use of video and audio surveillance systems is strictly regulated in most countries.
Therefore,inform yourself on laws andregulations that govern individual applicationsbefore
using the unit. Ensure compliance with these laws and regulations and also observe
regulations regarding data, working and environmental protection.
Do not make modifications
Do not make any modifications to the unit (neither to the software nor the hardware) without
consultingDallmeierelectronic.Impropermodifications can cause malfunctions or damages.
Dallmeierelectronicacceptsnoliability for damages resulting fromunauthorizedorimproper
modifications to the unit.
Protection against condensation water
If the unit is brought from a cold to a warm environment, condensation water can form
inside the unit. Short-circuits may then lead to damage to the system. Wait up to 8 hours for
the unit to reach room temperature before starting it up.
Observe the rated voltage
The unit can be damaged or destroyed by the application of an incorrect voltage.
The mains voltage must always match the rated voltage of the unit. The rated voltage is
specified on the rating plate of the unit.
Observe ratings
Unsuitableambientconditionsandimproperinstallation(mainlytoohighambienttemperature
and insufficient ventilation) may reduce the unit’s life cycle. Ensure compliance with the
stated operating conditions (see technical data), requirements at the installation site and, if
applicable, maintenance regulations.
Expansion components/peripheral devices
Useonlyexpansioncomponents conforming with the technicaldataoftheunit.Inappropriate
peripheral devices may result in the violation of local laws and regulations and damages to
the unit. In case of doubt, contact the sales partner responsible for your area.

DDF3000APV
7Dallmeier electronic
Do not open the unit
Do not open the housing of the unit. There are no components inside the unit that require
maintenance by the user. The inspection, maintenance and repair with an open housing
must only be carried out by trained and authorized professionals (installer).
Penetration of foreign bodies and liquids
No objects or liquids may be allowed to get into the device. In this case, immediately
disconnect the unit from the power supply (pull out the power plug). Please contact the
sales partner responsible for your area.
Measures to be taken in the event of damage and burnt smell
If you notice burnt smell or formation of smoke from a unit, immediately disconnect it from
the power supply (pull out the power plug). Please contact the sales partner responsible for
your area.
Disposal
Disconnect the unit from the power supply. Remove all connected units and system
components. Return the unit to your respective sales partner.

DDF3000APV
8Dallmeier electronic
3 General notes
3.1 Scope of delivery
Included in the standard scope of delivery is:
1 x DDF3000APV camera
1 x Quick Guide “Commissioning“
1 x Mounting template
1 x Video- / Power cable
2 x Ferrite clamp
1 x 2-pin connector
3 x Scew and dowel
1 x Allen wrench
1 x Mounting tool (for flush mount version only)
The scope of delivery may differ depending on the ordered equipment or device variant.
The device’s range of functions depends on the ordered equipment or device variant and
may therefore not correspond with this document’s content. Certain functions and features
may require an activation that is subject to costs.
3.2 Transportation and packaging
Store the original packaging for transportation at a later date. Dallmeier electronic is not
responsible for damage resulting from unprofessional/improper transportation. The goods
should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufficiently
protects the unit against damage, moisture, heat and cold.
3.3 Appropriate use
TheDDF3000APVis a vandal-resistantUWDR Cam_inPIX®colourPicodome®.It isdesigned
for indoor use.
3.4 Performance features
The DDF3000APV is especially characterised by the following functions and properties:
z1/3” DPS sensor with Cam_inPIX®technology
zDigital Pixel System®chipset
z17-bit Digital Signal Processing
zHigh sensitivity for low-light images at F1.4, 50 IRE: 1.0 lux
zProgressive Scan image capture
zProgressive segmented Frame (PsF) image transfer
zIR cut lens coating
zAdvanced noise reduction

DDF3000APV
9Dallmeier electronic
zEnhanced image quality by means of numerous control functions like AWB, AGC, BLC
and extended slow shutter
zMono focal lens with F1.4 and f = 3.6 mm
zUltra Wide Dynamic Range (UWDR) 120 dB max.
zConfiguration via UTC commands
zCompact vandal resistant housing
zPPL (push, point and lock; easy alignment)
NOTE
For detailled information, please see the chapter Technical
Data.
3.5 Certificates
The following certifications were in effect at the time this document was produced:
zCE
zFCC
zACA
zUVV-Kassen
zUL
zCB
3.6 Warranty
The warranty period is 36 months.
The terms and conditions valid at the signing of the contract apply.

DDF3000APV
10Dallmeier electronic
4 Notes on operating the camera
zThe camera is operated at 12V DC.
zIf the camera or the cables connected to the camera are located near sources of strong
radiation, the video picture may be distorted.
zThe camera is equipped with automatic gain control (AGC). In low light the picture may
be altered (e.g. noise). This is not a camera malfunction.
zThe quality of the video picture depends on the used lens, the lighting and the monitor
used to display the video picture.
zAutomatic white balance depends on the lighting used and can cause color distortions in
artificial light.
zPoor lighting can lead to faulty white balance.

DDF3000APV
11Dallmeier electronic
5 Views and connection assignment
5.1 Views
Flush mount version Surface mount version
1
2
3
4
5
1Camera support
2Rotary head
3Lens
4Bubble
5Housing ring
Fig.5-1

DDF3000APV
12Dallmeier electronic
Fig.5-2
Video (BNC)
+12V DC
GND
5.2 Connection assignment

DDF3000APV
13Dallmeier electronic
6 Installation and Commissioning
6.1 Requirements at the installation site
The DDF3000APV is designed for indoor use. Unfavorable local conditions may shorten
the life of the product or lead to malfunctions.
Do not install/operate the camera in places:
zwith large scale dust and dirt
zwith steam or oil vapors (e.g. kitchen)
zwith direct sunlight
zwith improper ambient temperatures (see technical data)
znear sources of strong radiation (i.e. X-rays, radio transmitters or magnetic fields)
zwith corrosive surroundings (e.g. gases or salt water).
6.2 Mounting flush mount version
You can mount the camera on a ceiling or a wall.
NOTE
The appropriate mounting template can be downloaded at
https://www.dallmeierpartner.de.
¾Stick the mounting template to the required position.
¾Drill holes for dowels in the marked locations, if necessary.
¾Cut a circular recess by means of the mounting template (Ø 70 mm).
¾Detach the remaining mounting template.
¾Connect the video and power cable (Fig. 5-2).
WARNING
Danger of death from lightning strike.
Do not connect/disconnect the video cable during a
thunderstorm!
WARNING
Danger of death from electric shock.
Disconnect the power supply before connecting the camera!
NOTE
Connect the power cable to the power supply by means of the
2-pin connector.

DDF3000APV
14Dallmeier electronic
¾Unscrew (counter-clockwise) the housing ring of the camera.
¾Remove the bubble.
¾Mount the camera support with 3 screws.
¾Connect the power supply unit to the power supply.
Bubble
Housing ring
Ø 4 mm / 3 x 120°
Fig.6-1
Fig.6-2

DDF3000APV
15Dallmeier electronic
¾Adjust the camera by slightly pushing and turning the rotary head.
Check the video image on a monitor.
¾Adjust the focus by turning the lens, if necessary.
Fix the lens by means of the locking screw.
IMPORTANT
Possible damage or malfunction of the camera by pulled plugs
or jammed/kinked cables.
Proceed with caution when aligning and adjusting the camera!
Do not use any force!
¾Attach the bubble to the housing ring.
Screw (clockwise) the housing ring onto the camera support.
¾Tighten the housing ring by means of the delivered tool.
CAUTION
Danger of injury from camera falling down.
Ensurethatthehousing ring, the bubble andthecamerasupport
are securely mounted!
Lens locking screw Rotary head
Lens
Fig.6-3
Fig.6-4

DDF3000APV
16Dallmeier electronic
6.3 Mounting surface mount version
You can mount the camera on a ceiling or a wall.
NOTE
The appropriate mounting template can be downloaded at
https://www.dallmeierpartner.de.
¾Stick the mounting template to the required position.
¾Drill holes for dowels in the marked locations, if necessary.
¾Cut a circular recess by means of the mounting template (Ø 45 mm).
¾Detach the remaining mounting template.
¾Connect the video and power cable (Fig. 5-2).
WARNING
Danger of death from lightning strike.
Do not connect/disconnect the video cable during a
thunderstorm!
WARNING
Danger of death from electric shock.
Disconnect the power supply before connecting the camera!
NOTE
Connect the power cable to the power supply by means of the
2-pin connector.
¾Unscrew (counter-clockwise) the housing ring of the camera.
¾Remove the bubble.
Fig.6-5
Housing ring
Bubble

DDF3000APV
17Dallmeier electronic
¾Mount the camera support with 3 screws.
¾Connect the power supply unit to the power supply.
¾Adjust the camera by slightly pushing and turning the rotary head.
Check the video image on a monitor.
¾Adjust the focus by turning the lens, if necessary.
Fix the lens by means of the locking screw.
IMPORTANT
Possible damage or malfunction of the camera by pulled plugs
or jammed/kinked cables.
Proceed with caution when aligning and adjusting the camera!
Do not use any force!
Ø 4 mm / 3 x 120°
Fig.6-6
Lens locking screw Rotary head
Lens
Fig.6-7

DDF3000APV
18Dallmeier electronic
¾Attach the bubble to the housing ring.
Screw (clockwise) the housing ring onto the camera support.
¾Tighten the securing screw.
CAUTION
Danger of injury from camera falling down.
Ensurethatthehousing ring, the bubble andthecamerasupport
are securely mounted!
Securing screw
Fig.6-8

DDF3000APV
19Dallmeier electronic
7 Preparing to configure
The camera is supplied with factory settings which enable it to be used for most scenarios
without further configuration. However, if required certain camera properties can be
configured using the camera menu.
The camera can be configured by means of the UTC Remote Box, the recorder or PView.
NOTE
There must be no video distributor or signal amplifier between
the camera and the UTC Remote Box (or recorder or PView).
NOTE
Refer to the separate operator’s manuals for the devices or
software used.
7.1 UTC Remote Box
Direct
Camera UTC Remote Box CVBS monitor
Via recorder
Camera UTC Recorder Monitor
Remote Box
Fig.7-1
Fig.7-2

DDF3000APV
20Dallmeier electronic
7.2 DMS Recorder
Camera Recorder Monitor
NOTE
This method requires a recorder with software version 5.3.1 or
higher and a built-in FG-11 frame grabber card.
7.3 PView
Camera Recorder PView Station Monitor
NOTE
This method requires a recorder with software version 5.3.1 or
higher and a built-in FG-11 frame grabber card, using PView
version 5.6.0 or higher.
Fig.7-3
Fig.7-4