dallmeier Picodome DDF4220HDV Series User manual

English
Rev. 1.0.1 / 2013-09-09
Configuration
DDF4220HDV

DDF4220HDV Picodome®
www.dallmeier.com 2
Information about Copyright, Trademarks, Design Patents
© 2013 Dallmeier electronic
The reproduction, distribution and utilization of this document as well as the communication of
its contents to others without express authorization is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved in the event of the grant of a patent, utility model or
design.
We reserve the right to make technical modications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
93051 Regensburg, Germany
www.dallmeier.com
[e-mail]
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
All trademarks identied by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA;
AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA;
IBM of International Business Machines Corporation headquartered in Armonk, New York, USA;
Intel and Pentium or Intel Pentium of Intel Corporation headquartered in Santa Clara, California, USA;
JavaScript of Oracle Corporation (and/or its afliates) headquartered in Redwood Shores, California, USA;
Linux of Linus Torvalds (in the USA and/or other countries);
Microsoft, ActiveX, DirectX, Internet Explorer, Windows, Windows Server and Windows Vista of Microsoft Corporation headquartered in
Redmond, Washington, USA
Third-party trademarks are named for information purposes only.
Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identication of third-
party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circum-
stance is no reason to assume that the respective trademark is unprotected.

DDF4220HDV Picodome®
www.dallmeier.com 3
Table of Contents
1 Introduction...................................................................................................5
1.1 Validity.............................................................................................................5
1.2 Documents......................................................................................................5
1.3 Typographical Conventions.............................................................................5
2 Safety Instructions........................................................................................6
3 General Notes................................................................................................8
3.1 Scope of Delivery............................................................................................8
3.2 Transportation and Packaging ........................................................................8
3.3 Warranty .........................................................................................................8
3.4 Appropriate Use..............................................................................................8
3.5 Performance Features ....................................................................................9
4 Requirements..............................................................................................10
4.1 General .........................................................................................................10
4.2 Operation ......................................................................................................10
4.3 Outdoor Use..................................................................................................11
4.4 Maintenance .................................................................................................11
5 Connection and Login................................................................................12
5.1 System Requirements...................................................................................12
5.2 Connection....................................................................................................13
5.3 Login .............................................................................................................15
6 Basic Settings .............................................................................................17
6.1 User Interface ...............................................................................................17
6.2 System Time .................................................................................................18
6.2.1 Manual Conguration....................................................................................18
6.2.2 Time Server ..................................................................................................19
6.3 Camera Name...............................................................................................20
6.4 User Management ........................................................................................20
6.4.1 Login Mode ...................................................................................................20
6.4.1.1 Group Login ..................................................................................................21
6.4.1.2 User Login.....................................................................................................22
6.4.1.3 LDAP Login...................................................................................................23
6.4.2 Rights............................................................................................................26
7 Network........................................................................................................28
7.1 Basic Settings ...............................................................................................28
7.1.1 Manual Conguration....................................................................................30
7.1.2 DHCP............................................................................................................30
7.2 Security.........................................................................................................31
7.3 Streaming......................................................................................................32
7.3.1 Video Server .................................................................................................32
7.3.1.1 Transfer Protocol and Format .......................................................................32
7.3.1.2 Transfer Method............................................................................................33
7.3.1.3 TTL................................................................................................................34
7.3.1.4 RTCP ............................................................................................................34
7.3.2 Dynamic Servers...........................................................................................34
7.3.3 RTSP ............................................................................................................35

DDF4220HDV Picodome®
www.dallmeier.com 4
8 Video ............................................................................................................37
8.1 Video Standard .............................................................................................37
8.2 Sensor...........................................................................................................37
8.2.1 Global............................................................................................................38
8.2.2 Expert Settings..............................................................................................42
8.3 Exposure Control ..........................................................................................43
8.4 Privacy Zones ...............................................................................................44
8.5 Encoder Settings...........................................................................................46
8.5.1 Encoder 1......................................................................................................46
8.5.2 Encoder 2......................................................................................................50
8.5.3 Encoder 3......................................................................................................50
9 Event Management .....................................................................................51
9.1 SMTP Server ................................................................................................52
9.2 FTP Server....................................................................................................54
9.3 Scheduler......................................................................................................56
9.3.1 Week Timer...................................................................................................56
9.3.2 Exceptions ....................................................................................................58
9.3.3 Copy Exceptions...........................................................................................60
9.4 Copy Event Settings .....................................................................................62
9.5 Delete Event Handler....................................................................................64
10 Interfaces.....................................................................................................65
10.1 Data Display..................................................................................................65
10.1.1 Filter..............................................................................................................65
10.1.2 Position .........................................................................................................66
11 Digital Image Shift.......................................................................................68
12 Service and Info ..........................................................................................70
12.1 Downloads ....................................................................................................70
12.2 Factory Settings............................................................................................70
12.3 Licenses........................................................................................................71
12.4 Event Log......................................................................................................71
12.5 Conguration File..........................................................................................72
12.5.1 Download......................................................................................................72
12.5.2 Upload...........................................................................................................73
12.5.2.1 Conguration Recovery ................................................................................73
12.5.2.2 Conguration Transfer to Several Devices ...................................................74
12.6 Info................................................................................................................75
13 Image Transmission ...................................................................................76
13.1 Web Browser ................................................................................................76
13.1.1 Live Video (ActiveX)......................................................................................76
13.1.2 Single Image (JPEG) ....................................................................................77
13.2 RTSP Application ..........................................................................................78
13.3 Analogue Video Output.................................................................................79

DDF4220HDV Picodome®
www.dallmeier.com 5
1 Introduction
1.1 Validity
This document applies to the following device:
• DDF4220HDV Picodome®
The descriptions in this document are based on the software version 7.1.0.8.
Figures in this document may differ from the actual product.
1.2 Documents
Data Sheet
The document “Data Sheet” contains detailed technical specications and features of the
device.
The target audience is trained system integrators.
Installation
The document “Installation” contains detailed descriptions on installation, connection and
commissioning of the device as well as safety instructions and general notes.
The target audience is trained system integrators.
Conguration
The document “Conguration” (this document) contains detailed descriptions on the con-
guration of the device as well as safety instructions and general notes.
The target audience is trained system integrators.
1.3 Typographical Conventions
For reasons of clarity and readability, various text formatting elements and types of em-
phasis are used in this documentation:
NOTICE
NOTICE indicates practices for preventing property damage, incorrect
congurations or faulty operations.
Instructions are indicated by arrows ().
Always carry out instructions one after the other in the sequence described.
Expressions in bold/italics generally indicate a control element on the device (switches
or labels) or on its user interface (buttons, menu entries).
Paragraphs in italics provide information on basic principles, special features and efcient
procedures as well as general recommendations.

DDF4220HDV Picodome®
www.dallmeier.com 6
2 Safety Instructions
Only use the unit if it is technically in proper working condition and for the intended pur-
pose while keeping safety and potential dangers in mind.
Qualied Personnel
The installation, mounting, connection, commissioning and conguration of the unit may
only be carried out by qualied personnel.
This also applies to the maintenance, testing and repair, whereat the regulations of the
DIN VDE 0701 series of standards (repair, modication and inspection of electrical appli-
ances) must be followed.
Regulations
The use of video and audio surveillance systems is, in general, strictly regulated.
Inform yourself about the currently valid laws and regulations regarding data, worker and
environmental protection before using the unit and ensure compliance with them.
System Components
Only use internal components that have been tested and approved by Dallmeier.
Inappropriate internal components may cause malfunctions, damages and data loss and
may result in the loss of warranty.
Modications
Do not make any modications to the hardware or software that have not been tested and
approved by Dallmeier.
Inappropriate modications may cause malfunctions, damages and data loss and may
result in the loss of warranty.
Documentation
Read the documents included in the delivery carefully and thoroughly.
Always observe the contained instructions, notes and warnings.
Condensation Water
If the unit is brought from a cold to a warm environment, resulting condensation water
may cause malfunctions and damages.
In this case, wait (up to 8 hours) until the unit has reached room temperature before com-
missioning.
Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages) and devices
(protection against overvoltages) and the immunity of information and communication
technology equipment to electromagnetic interferences (EMI), all protective measures,
which are specied by the currently valid DIN, VDE and ISO standards and which provide
for a standard-compliant earthing and a correct equipotential bonding of electrical and
electronic devices, are mandatory and must be fullled by all means.

DDF4220HDV Picodome®
www.dallmeier.com 7
Lightning Storms
To avoid damage to the unit by electrical surge during lightning storms, unplug the unit
from the mains power supply (pull out the power plug).
This is also recommended, when the unit has been unused for a long period of time.
Operating Conditions
Unfavourable operating conditions may shorten the life of the unit and may cause mal-
functions, damages and data loss and may result in the loss of warranty.
Observe the specications given in the technical data, the operating condition require-
ments and the maintenance instructions.
Shocks
Shocks may cause malfunctions and damages.
The unit may not be moved while in operation.
Foreign Bodies
If objects or liquids get into the unit, immediately disconnect it from the power supply (pull
out the power plug).
Contact the sales partner responsible for your area.
Burnt Smell
If you notice burnt smell or a formation of smoke coming from the unit, immediately dis-
connect it from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
Opening
The housing of the unit may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.
Disposal
Do not dispose waste electrical and electronic equipment into the household trash.
Disconnect the unit from the power supply.
Remove all connected devices.
Return the unit to your respective sales partner.

DDF4220HDV Picodome®
www.dallmeier.com 8
3 General Notes
3.1 Scope of Delivery
Included in the standard scope of delivery is:
1× DDF4220HDV Picodome® IM or SM (depending on the product ordered)
1× Documentation “Conguration” (published on DVD-ROM)
1× Documentation “Installation” (published in print and on DVD-ROM)
1× Drilling template (published in print and on DVD-ROM)
In addition, all screws, dowels and special tools necessary for a proper installation of the
ordered device variant are included.
The scope of delivery may differ depending on the ordered equipment, device variant or
country of destination.
The functional range of the devices depends on the ordered equipment or device variant
and may differ from this document’s content.
Certain functions and features may require the purchase of an additional license.
3.2 Transportation and Packaging
Store the original packaging for later transportation.
Dallmeier is not responsible for any damage resulting from unprofessional/improper trans-
portation.
The goods should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufciently
protects the units against damage, moisture, heat and cold.
3.3 Warranty
The terms and conditions valid at time the contract was signed shall apply.
3.4 Appropriate Use
DDF4220HDV Picodome®IM
The DDF4220HDV Picodome® IM (in-ceiling mount variant) is a hybrid 1.3-megapixel HD
network camera built into a vandal-resistant (IK10) dome enclosure.
It is exclusively designed for indoor installations in suspended ceilings or drywall
(plasterboard) systems and can be powered via PoE (Power over Ethernet Class 0,
IEEE 802.3af) or supplied with 12 V DC (separate power supply unit required).
DDF4220HDV Picodome®SM
The DDF4220HDV Picodome® SM (surface mount variant) is a hybrid 1.3-megapixel HD
network camera built into a vandal-resistant (IK10) dome enclosure.
It is designed for indoor installations on ceilings and walls and can be powered via PoE
(Power over Ethernet Class 0, IEEE 802.3af) or supplied with 12 V DC (separate power
supply unit required).

DDF4220HDV Picodome®
www.dallmeier.com 9
3.5 Performance Features
• 1/3" 1.3-megapixel CMOS image sensor
• Pure Digital Signal Processing
• Hybrid HD camera – HD video over IP (Ethernet, RJ45) and analogue SD (PAL/NTSC)
video output via BNC (CVBS)
• Real-time HD video (720p/30)
• Wide Dynamic Range (WDR)
• Excellent low-light performance
• Monofocal lens (F2.0 / 2.4 mm)
• Resolution video over IP: SD (4CIF PAL/NTSC), HD (720p, SXGA−)
• Resolution analogue video output: SD (4CIF PAL/NTSC)
• Video compression: H.264, MJPEG
• Frame rate up to 30 fps
• Simultaneous Dual- or Tri-Streaming
• Manual White Balance (MWB)
• Automatic White Balance (ATW, One-Push AWB)
• Automatic Gain Control (AGC)
• Automatic Electronic Shutter (AES)
• Comprehensive set of image optimization functions, such as brightness,
contrast, saturation and sharpness
• Digital Noise Reduction (DNR)
• Three different exposure metering modes:
average metering (light information from entire scene),
centre-weighted average metering and spot metering
• Privacy Zone Masking (hiding/masking of protected areas)
• Flip function (horizontal, vertical or both)
• Digital Image Shift1)
• Alarm notication via e-mail and FTP image upload
• Voltage supply with 12 V DC or via PoE (Class 0, IEEE 802.3af)
• Low power consumption (2.9 W typical)
• Compact vandal-resistant (IK10) Picodome®housing
• IP66 (surface mount variant)
• Various elegant design variants available on request
• PPL ball joint (Push, Point & Lock for easy alignment)
• ONVIF compliant
• DIN EN 50130-4 compliant
1) Digital Image Shift = Provides digital ne alignment of the image section
(only applicable at 720p, vertical alignment by 120 pixels up or down)

DDF4220HDV Picodome®
www.dallmeier.com 10
4 Requirements
4.1 General
Unfavourable local conditions may shorten the life of the product and may cause malfunc-
tions or damages.
Do not install/operate the device in places
• with a large amount of dust and dirt,
• with steam or oil vapours (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiation (e.g. radio transmitters, magnetic elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insufcient air ventilation (e.g. closed cabinet).
4.2 Operation
Observe the following notes for the operation of the device:
• The device can be powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af) or
supplied with a separate 12 V DC power supply unit.
However, always beware not to use both power sources simultaneously.
• Always ensure the correct polarity when using a separate 12 V DC power supply unit.
• Always disconnect the separate 12 V DC power supply unit from the mains socket
(pull out the power plug) before connecting or disconnecting the device.
• In order to comply with UL’s requirements, always use a UL-certied, Limited Power
Source (LPS) Class 2 power supply unit when operating the device with a separate
12 V DC power supply unit.
• When using a separate 12 V DC power supply unit, interference caused by a ground
loop may occur in the analogue video signal. In this case, use a video signal trans-
former (balun) for galvanic (ground) isolation between the signal source (camera)
and the RG-59 cable.
• If the device or the cables connected to the device are located near sources with
strong radiation, the video image may be distorted.
• The device is equipped with automatic gain control (AGC). In low light conditions the
image may be altered (e.g. noise). However, this is not a camera malfunction.
• The quality of the video image depends on the lighting conditions and the used monitor.
• The accuracy of the automatic white balance (AWB) algorithm depends on the used
lighting. Mixed light (consisting of articial light and daylight) may cause colour distor-
tions (inaccurate colour reproduction).
• Poor lighting can lead to an incorrect white balance.
• The device is equipped with a Wide Dynamic Range (WDR) functionality. If WDR
mode is enabled, the so-called “solarization effect” (complete or partial reversal of
tones with extremely bright light sources) may be observed with some objects. This
phenomenon only occurs in WDR mode and is not an indication of camera malfunc-
tion.

DDF4220HDV Picodome®
www.dallmeier.com 11
4.3 Outdoor Use
DDF4220HDV Picodome®IM
The DDF4220HDV Picodome® IM (in-ceiling mount variant) is exclusively designed for
indoor installations.
An outdoor installation is prohibited and may result in malfunction, damage, data loss and
loss of warranty.
DDF4220HDV Picodome®SM
The DDF4220HDV Picodome® SM (surface mount variant) is designed for indoor installa-
tions.
However, an outdoor installation may be permitted, but only in compliance with the follow-
ing instructions/recommendations:
• Protect the device from direct inuence of weather conditions (rainfall, direct sunlight, etc.).
• Always use a protected installation site (e.g. under a canopy).
4.4 Maintenance
The housing of the unit may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.
Cleaning
If it is necessary to clean the device, observe the following notes:
NOTICE
Damage to the surface of the device
Clean the housing (outside) with a soft, dry and antistatic cloth.
Do not use detergents.
Clean the plastic bubble with water and some dishwashing agent using
a soft, non-linting cloth or sponge.
Do not rub the plastic bubble with a dry cloth.
Do not use common glass cleaners.
Avoid excessive rubbing.
Dry gently with a clean dry cloth to avoid scratching the surface.

DDF4220HDV Picodome®
www.dallmeier.com 12
5 Connection and Login
The conguration of the device is carried out with a PC/web browser via the local area
network (LAN).
NOTICE
The conguration of the device must always be carried out with a web
browser over an IP-based network, even if you want to operate the hybrid
camera solely as an analogue camera later on.
5.1 System Requirements
To congure the device with live video display, the client PC must meet the following mini-
mum system requirements:
Computer IBM*)-PC compatible
Operating system (OS) Microsoft*) Windows*) XP
Windows Vista*)
Windows 7
(each with latest service pack)
Processor (CPU) 3 GHz Intel*) Pentium*) 4
AMD*) Athlon*) 64 3400+ or faster
(or equivalent)
Random access memory (RAM) 1 GB (Windows XP)
2 GB (Windows Vista, Windows 7)
Graphics card DirectX*) 9.0 or 10.0 compatible
64 MB of graphics memory
(128 MB or higher recommended)
Ethernet 100 Mbps
Web browser Microsoft Internet Explorer*) (latest version)
Software Adobe*) Flash*) Player (latest version)
JavaScript*) enabled
Microsoft ActiveX*) enabled
Dallmeier Live Video ActiveX (latest version)
Note that
• a more powerful PC is required if several devices are congured with live video display
simultaneously.
• a DirectX compatible graphics card and the Dallmeier Live Video ActiveX are not re-
quired for the conguration without live video display.
• the Dallmeier Live Video ActiveX can be downloaded directly from the device.
• the Dallmeier Live Video ActiveX can be downloaded from the Dallmeier Partner Forum.
• the Dallmeier Live Video ActiveX can be automatically downloaded from the Internet
after the connection to the device is established (only with Microsoft Internet Explorer
and if it is not already installed).
• the conguration without live video display can theoretically be carried out with any
operating system and web browser.
However, the Adobe Flash Player is always required for the conguration.

DDF4220HDV Picodome®
www.dallmeier.com 13
5.2 Connection
The factory default IP address of the device is 192.168.2.28.
Ensure that the PC/web browser can establish a connection to the device via Ethernet.
Start the web browser.
Enter the IP address of the device into the address bar of the web browser.
Conrm the input.
The connection to the device is established.
The graphical user interface (GUI) of the live mode is displayed.
A GFDCB E
Fig. 5-1 Live mode with adjustable video resolution
AHide/show title bar
B Switch between live and conguration mode
CLive video
DAdjust video resolution
E Connection method (UDP or TCP)
FIP address of the device
G Log out of conguration mode

DDF4220HDV Picodome®
www.dallmeier.com 14
Note the explanations below.
Hide the title bar (A) if required.
Change the Connection method (E) if required.
Adjust the live video resolution (D) if required.
The video resolution setting mentioned above only affects the live video display in the
web browser and is not related to the encoder settings.
Connection Method
If the network connection to the device is established via a router/gateway with NAT (Net-
work Address Translation) function, the live video may not be shown in the web browser.
In this case, two solutions are available:
The router/gateway has to be congured for a correct address translation of data packets
sent by the User Datagram Protocol (UDP).
UDP is by default used by the streaming function of the device.
An easier solution is to select TCP from the drop-down list Connection method.
In this case, the device switches the protocol of the streaming function to the
Transmission Control Protocol (TCP).
To receive the data packets, the port 30000 for the DaVid Protocol2) and port 80 for the
Hypertext Transfer Protocol (HTTP) must be open.
Note that during the data transmission via TCP
• normally no packet loss (lack of images) occurs.
• short-term peaks in network trafc may occur.
• low delays may occur.
The “Connection method” described above does not affect the streaming function (see
section “Streaming” on page 32).
2) Dallmeier Video Protocol

DDF4220HDV Picodome®
www.dallmeier.com 15
5.3 Login
The graphical user interface of the conguration mode is displayed after the successful
identication as authorized user.
The factory default admin password is “3”.
NOTICE
Risk of misuse by unauthorized users!
Change the factory default admin password as soon as possible.
Click CONFIG in the user interface of the live mode.
The login dialogue is displayed.
Fig. 5-2
Enter the Username (Default: “admin”) if required.
Enter the Password (Default: “3”).
Conrm with OK.
The graphical user interface of the conguration mode is displayed.

DDF4220HDV Picodome®
www.dallmeier.com 16
E
DC
HF
BA
G
Fig. 5-3 Conguration mode
AHide/show title bar
B Switch between live and conguration mode
CIP address of the device
D Log out of conguration mode
EDisable/enable live video display
FLive video
G Conguration menu
H Conguration dialogues
Note that
• the live video display and live audio output in the conguration mode can be disabled if
merely a low bandwidth is available.
• a new login is required after 5 minutes without user action.

DDF4220HDV Picodome®
www.dallmeier.com 17
6 Basic Settings
The basic settings and the user management are integrated in the Common settings
menu.
6.1 User Interface
The graphical user interface can be displayed in various languages.
Open the User interface dialogue via Common settings > User interface ....
Fig. 6-1
Select the required Language.
Deactivate the Show live video (ActiveX) in WebCong checkbox if network bottle-
necks occur or your system is overloaded.
Conrm with OK.

DDF4220HDV Picodome®
www.dallmeier.com 18
6.2 System Time
The system time can be set manually or synchronized with a UTC time server.
However, the time zone must be set in both cases.
Open the Time settings dialogue via Common Settings > Time ....
Select the Time zone tab.
Fig. 6-2
Set the Time zone.
Conrm with OK.
6.2.1 Manual Conguration
Note that manual conguration is not possible if the UTC time server synchronization is
enabled.
Select the Date/Time tab.
Fig. 6-3
Set the Date.
Set the Time.
Conrm with OK.

DDF4220HDV Picodome®
www.dallmeier.com 19
6.2.2 Time Server
Note that the time server must always be accessible via the network.
Select the Time server tab.
Fig. 6-4
Enter the IP address (or the host name) of the time server.
Activate the Use time server checkbox to enable the UTC time server synchronization.
Conrm with OK.
If using the host name instead of the IP address, ensure that the Domain Name System
(DNS) settings are correctly congured (see section “Domain Name System (DNS)” on
page 29). Contact your network administrator for more information and assistance.

DDF4220HDV Picodome®
www.dallmeier.com 20
6.3 Camera Name
The camera can be assigned a unique name which then is displayed in an external ap-
plication (e.g. SMAVIA Viewing Client3)) and which can be inserted directly in the video.
Open the Camera name dialogue via Common settings > Camera name ....
Fig. 6-5
Enter a unique name for the camera.
If required, select the position where the camera name is supposed to be displayed in
the video from the drop-down list Insert name in video.
Select the option for the colour representation of the camera name in the video from
the drop-down list Color.
Depending on the image information, the colour option “automatic” displays the charac-
ters of the camera name either in white or in black to provide a better readability.
Conrm with OK.
6.4 User Management
The conguration of the device must be preceded by a successful authentication as an
authorized user or user group.
The user management allows for the denition of various access and conguration rights
for three different local user groups. In addition, individual local users can be assigned to
the local user groups if necessary.
Furthermore, the centralized user management with LDAP (Lightweight Directory
Access Protocol) is supported by an Active Directory (AD) service (such as
Microsoft Windows Server*) or Linux*) server with Samba).
6.4.1 Login Mode
The login mode denes the authentication type.
Login mode Type
Group login Group password
User login User name + user password
or
Group password
LDAP login LDAP user name + LDAP user password
The authentication with the group password is also possible in the “User login” mode.
3) Dallmeier Video Management Software