dallmeier CaminPIX DDF4010HDV-IM User manual

English
Rev. 1.0.4 / 101006
Installation and Configuration
Vandal-resistant High Definition IP Dome Camera
DDF4010HDV
1080p
-SM
(Surface Mount Variant)
-IM
(In-ceiling Mount Variant)
-WM
(Weather-proof Variant)


www.dallmeier.com 

© 2010 Dallmeier electronic
The reproduction, distribution and utilization of this document as well as the communication of
its contents to others without express authorization is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved in the event of the grant of a patent, utility model or
design.
We reserve the right to make technical modications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
93051 Regensburg, Germany
www.dallmeier.com
[e-mail]
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
All trademarks identied by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA
IBM of International Business Machines Corporation headquartered in Armonk, New York, USA
Microsoft, ActiveX, DirectX, Internet Explorer, Windows and Windows Vista of Microsoft Corporation headquartered in Redmond,
Washington, USA
Third-party trademarks are named for information purposes only.
Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identication of third-party
trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is
no reason to assume that the respective trademark is unprotected.


www.dallmeier.com 

 
1.1 Validity .............................................................................................................6
1.2 Documents ......................................................................................................6
1.3 Conventions ....................................................................................................6
 
 
3.1 Scope of Delivery ..........................................................................................10
3.2 Transportation and Packaging ......................................................................10
3.3 Appropriate Use ............................................................................................10
3.4 Performance Features ..................................................................................10
3.5 Warranty .......................................................................................................11
3.6 Approvals/Certications ................................................................................11
 
4.1 General .........................................................................................................12
4.2 Power Supply ................................................................................................12
4.3 Outdoor .........................................................................................................12
4.4 Operation ......................................................................................................12
 
5.1 In-ceiling Mount Variant ................................................................................13
5.2 Surface Mount Variant ..................................................................................15
5.3 Weather-proof Variant ...................................................................................18
 
6.1 In-ceiling Mount Variant ................................................................................19
6.2 Surface Mount Variant ..................................................................................23
 
7.1 System Requirements...................................................................................25
7.2 Connection ....................................................................................................25
7.3 Login .............................................................................................................27
 
8.1 Language ......................................................................................................29
8.2 System Time .................................................................................................29
8.2.1 Manual Conguration ....................................................................................30
8.2.2 Time Server ..................................................................................................30
8.3 Camera Name...............................................................................................31
8.4 User Management ........................................................................................31
8.4.1 Login Mode ...................................................................................................31
8.4.2 User Groups..................................................................................................32
8.4.3 User ..............................................................................................................33
8.4.3.1 Dene a User ................................................................................................33
8.4.3.2 Edit User .......................................................................................................34
8.4.4 Rights ............................................................................................................34
 
9.1 Basic Settings ...............................................................................................36
9.1.1 Manual Conguration ....................................................................................37


www.dallmeier.com 
9.1.2 DHCP ............................................................................................................37
9.2 Alarm Hosts ..................................................................................................38
9.2.1 Settings .........................................................................................................38
9.2.2 Messages......................................................................................................39
9.2.3 Scheduler ......................................................................................................39
9.2.3.1 Week Timer ...................................................................................................39
9.2.3.2 Exceptions ....................................................................................................41
9.2.3.3 Copy Exceptions ...........................................................................................43
9.2.4 Copy..............................................................................................................44
9.2.5 Delete Alarm Host Entry................................................................................45
9.3 Video Streaming ...........................................................................................46
9.3.1 Transfer Protocol and Format .......................................................................46
9.3.2 Transfer Method ............................................................................................47
9.3.3 TTL ................................................................................................................48
 
10.1 Video Standard .............................................................................................49
10.2 Sensor...........................................................................................................49
10.2.1 Global............................................................................................................50
10.2.2 Image Optimization .......................................................................................51
10.2.3 White Balance ...............................................................................................52
10.2.4 Day/Night ......................................................................................................53
10.3 Encoder Settings...........................................................................................54
10.3.1 Encoder 1......................................................................................................54
10.3.2 Encoder 2......................................................................................................56
10.3.3 Audio .............................................................................................................56
 
11.1 Serial Interface ..............................................................................................57
11.2 Relays ...........................................................................................................57
11.3 Data Display..................................................................................................58
11.3.1 Filter ..............................................................................................................58
11.3.2 Position .........................................................................................................59
 
 
13.1 Event Log ......................................................................................................62
13.2 Conguration File ..........................................................................................62
13.2.1 Download ......................................................................................................62
13.2.2 Upload...........................................................................................................63
13.2.2.1 Conguration Recovery ................................................................................63
13.2.2.2 Conguration Transfer to Several Devices ...................................................63
13.3 Info ................................................................................................................65
 
14.1 Web Browser ................................................................................................66
14.2 RTSP Application ..........................................................................................66
 
 
16.1 Terminal Area ................................................................................................69
16.2 Plug-in module ..............................................................................................71


www.dallmeier.com 
 
 
18.1 In-ceiling Mount Variant ................................................................................74
18.2 Surface Mount Variant ..................................................................................75
18.3 Weather-proof Variant ...................................................................................76


www.dallmeier.com 
 
 
This document applies to the following vandal-resistant High Denition IP
dome cameras:
•  (in-ceiling mount variant)
•  (surface mount variant)
•  (weather-proof variant)
The descriptions in this document are based on the software version  and apply to all
above-mentioned device variants.
If text passages require distinctions to be made between the device variants, the complete
product names will be mentioned.
Pictures in this document may differ from the actual product.
 

The document entitled “Commissioning” contains the most important steps for the connec-
tion and commissioning of the device.

The document entitled “Installation and Conguration” contains detailed descriptions of
the installation, connection, commissioning and conguration of the device. Safety instruc-
tions, general notes and technical data are additionally provided.
The target audience is exclusively specially trained and authorized professionals (install-
ers).
 
This document contains various warning words and symbols that indicate potential sources
of danger.

DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.


www.dallmeier.com 

NOTICE indicates practices for preventing property damage, incorrect
congurations or faulty operations.
Instructions are indicated by arrows ().
Expressions in  generally indicate a control element on the device (switches or
labels) or on its user interface (buttons, menu entries).
Paragraphs in italics provide information on basic principles, special features and efcient
procedure as well as general recommendations.


www.dallmeier.com 
 
Only use this unit if it is technically in proper working order, to the intended purpose and
while keeping safety and potential dangers in mind.

Installation, mounting, connection, commissioning and conguration of the unit may only
be carried out by qualied personnel. This also applies to the maintenance, testing and re-
pair, whereat the regulations of the DIN VDE 0701 series of standards (repair, modication
and inspection of electrical appliances) must be followed.

The use of video and audio surveillance systems in general is strictly regulated. Inform
yourself about the applicable laws and regulations regarding data, working and environ-
mental protection before using the unit and ensure compliance with them.

Only use internal components that have been tested and approved by Dallmeier. Inappro-
priate internal components can cause malfunctions, damages and data loss and can result
in loss of warranty.

Do not make any modications to the hardware or software that has not been tested and
approved by Dallmeier. Inappropriate modications can cause malfunctions, damages and
data loss and can result in loss of warranty.

Carefully and completely read the documents included in delivery. Always observe the
contained instructions, notes and warnings.

If the unit is brought from a cold to a warm environment, resulting condensation water
can cause malfunctions and damages. In this case wait (up to 8 hours) until the unit has
reached room temperature before commissioning.

Unfavourable operating conditions can shorten the life of the unit and can cause malfunc-
tions, damages and data loss and can result in loss of warranty. Observe the specications
given in the technical data, the operating condition requirements and the maintenance
instructions.

Shocks can cause malfunctions and damages. The unit may not be moved while in opera-
tion.

If objects or liquids get into the unit, immediately disconnect it from the power supply (pull
out the power plug). Contact the sales partner responsible for your area.


www.dallmeier.com 

If you notice burnt smell or formation of smoke from the unit, immediately disconnect it from
the power supply (pull out the power plug). Contact the sales partner responsible for your
area.

The housing of the unit may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.

Disconnect the unit from the power supply. Remove all connected devices. Return the unit
to your respective sales partner.


www.dallmeier.com 
 
 
Included in the standard scope of delivery is:
1× DDF4010HDV
1× Documentation “Installation and Conguration” (CD)
1× Documentation “Commissioning” (in print)
The scope of delivery may differ depending on the ordered equipment, the device variant
or the country of destination.
The functional range of the device depends on the ordered equipment or device variant
and may differ from this document’s content. Certain functions and features may require an
activation that is subject to costs.
 
Store the original packaging for transportation at a later date. Dallmeier electronic is not
responsible for damage resulting from unprofessional/improper transportation. The goods
should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufciently
protects the unit against damage, moisture, heat and cold.
 
The DDF4010HDV is a vandal-resistant High Denition IP dome camera.
The in-ceiling mount variant is designed for indoor installations in suspended ceilings, the
surface mount variant for indoor installations on ceilings and walls and the weather-proof
variant for outdoor installations. All device variants can be operated via PoE (Power over
Ethernet, Class 0) or at 24 V AC.
Note that the built-in heater of the weather-proof variant must be separately supplied with
24 V AC if required.
 
• 1/3" Full High Denition CMOS image sensor with technology
• Pure Digital Signal Processing
• 10× optical zoom
• 12× digital zoom
• ICR function für Day/Night switching
• Dallmeier Image Optimiser for perfect image quality even under difcult lighting condi-
tions
• Enhanced image quality by means of numerous control functions such as AWB, AGC,
BLC and slow shutterr
• Zoom lens: F1.8 – F2.1 / f=5.1 – 51 mm
• Auto-focus with manual correction
• Resolution: SD, HD (720p, 1080i, 1080p)


www.dallmeier.com 
• Frame rate: up to 50 fps
• MJPEG and H.264 video compression
• Simultaneous multi-streaming with independently adjustable resolutions, frame and bit
rates of each stream
• SmartZoom functionality
• Messaging function
• 64 MB RAM video buffer
• PoE ready
• Voltage supply via PoE or 24 V AC
• Tri-axial adjustment
• Three available device variants:
in-ceiling mount, surface mount and weather-proof variant
• Compact, vandal-resistant housing with IP67 (surface mount and weather-proof variant
only)
• DIN EN 50130-4 compliant
For detailed information see chapter “Technical Data” on page 72.
 
The terms and conditions valid at the signing of the contract shall apply.
 
Following approvals/certications were valid at the time of document compilation.
Refer to www.dallmeier.com for possible updates.
• CE
• FCC
• UL
• ACA
• CB
• DIN 50130-4 compliant


www.dallmeier.com 
 
 
Unfavourable local conditions may shorten the life of the product and can cause malfunc-
tions or damages.
Do not install/operate the device in places
• with large scale dust and dirt.
• with steam or oil vapours (e.g. kitchen).
• with direct sunlight.
• strong heat emission (e.g. radiator).
• with improper ambient temperatures.
• near sources of strong radiation (e.g. radio transmitters, magnetic elds).
• with corrosive surroundings (e.g. gases, salt water).
• insufcient air ventilation (e.g. closed cabinet).
 
The device can be operated via PoE (Power over Ethernet, Class 0) or at 24 V AC.
Ensure that the existing network supports the PoE standard IEEE 802.3af if you want
to supply the device with power over Ethernet.
Note that the built-in heater of the weather-proof variant must be separately supplied with
24 V AC (max. 3 A) if required.
 
For outdoor installations, use the weather-proof variant.
However, note that direct insolation can cause very high temperatures inside the housing.
In this case use the corresponding sunshield.
 
Observe the following notes for the operation of the device:
• If the device or the cables connected to the device are located near sources of strong
radiation, the video image may be distorted.
• The device is equipped with automatic gain control (AGC). In low light the image may
be altered (e.g. noise). This is not a malfunction.
• The quality of the video image depends on the lens, the lighting and the used moni-
tor.
• Automatic white balance depends on the lighting used and can cause colour distor-
tions in articial light.
• Poor lighting can lead to faulty white balance.


www.dallmeier.com 
 
 
M6 screw eye bolt
Ceiling clamp
Trim ring with bubble
Housing
Terminal area
Lens
Ceiling clamp
Housing screw
(T20 Torx)
Fig. 5-1
Ceiling clamp
M6 screw eye bolt
Lens
Trim ring with bubble
Housing screw
(T20 Torx)
Fig. 5-2


www.dallmeier.com 
M4 locking screw
(ceiling clamp)
Thread for housing screw
USB / SD port
Video preview output
(3.5 mm phone jack)
M4 locking screw
(ceiling clamp)
Fig. 5-3
3-axis mount
(pan / tilt / rotation)
WIDE button
TELE button
Fig. 5-4


www.dallmeier.com 
 
Thread for
PG16 cable gland
Thread for housing screw
Housing base
Slot for spring clip 1
Securing screw
(spring clip 2)
Video preview output
(3.5 mm phone jack)
USB / SD port
Housing with bubble
Housing screw
(T20 Torx)
Lens
Plug-in module
Spring clip 2
Securing screw
(spring clip 2)
Terminal area
Slot for spring clip 2
Fig. 5-5


www.dallmeier.com 
Mounting hole for
Ø 4 mm screw
Slot for spring clip 1
Thread for housing screw
Mounting hole for
Ø 4 mm screw
Housing base
Thread for housing screw
Thread for housing screw
Mounting hole for
Ø 4 mm screw
Thread for
PG16 cable gland Slot for spring clip 2
Terminal area
Fig. 5-6
Securing screw
(spring clip 1)
Securing screw
(spring clip 1)
Plug-in module
Lens
Securing screw
(spring clip 2)
Securing screw
(spring clip 2)
Video preview output
(3.5 mm phone jack)
USB / SD port
Spring clip 1
Spring clip 2
Fig. 5-7


www.dallmeier.com 
Plug-in module
Securing screw
(spring clip 2)
Securing screw
(spring clip 1)
Spring clip 1
3-axis mount
(pan / tilt / rotation)
WIDE button
TELE button
Spring clip 2
Fig. 5-8


www.dallmeier.com 
 

Heating
Light Blue:
Brown:
Green: RS485 (Tx+)
Yellow: RS485 (Rx+)
Red: GP Out
Blue: GP In 1
Gray: GP In 2
Purple: GP In 3
Green/White: RS485 (Tx−)
Yellow/White: RS485 (Rx−)
Red/White: GND I/O
Blue/White: GND I/O
Gray/White: GND I/O
Purple/White: GND I/O
3
Power IN (24V AC)
1 8...
Ethernet (RJ45)
Pin 1
...1
Fig. 5-9
Power IN (24 V AC) for camera unit
 
1 24 V AC
2 Not used
3 24 V AC
Note that
• the built-in heater of the weather-proof variant must be separately supplied with 24 V AC
(max. 3 A) if required.
• the delivered silica gel packets must be placed in the weather-proof housing (behind
the heater ring) to avoid moisture and condensation damage.


www.dallmeier.com 
 
Installation and commissioning of the unit may only be carried out by qualied personnel.


Danger of death or serious injury to the head
Observe the manufacturer’s instructions about the maximum adequate
carrying capacity of the supporting structure and the suspended ceiling
or ceiling tiles.
Use screws suitable for the ceiling/wall material.
Use the correct type of anchor for your ceiling/wall type:
• Plastic screw anchors for solid wall material (concrete/brick)
• Toggle bolt style anchors for drywall / hollow wall type (plaster)

Danger of death or serious injury
Disconnect the power supply unit from the mains socket before connect-
ing the device.
In order to comply with the UL requirements, you have to use a UL-certied, limited power
source (LPS) Class 2 power supply unit.
 
You need:
• Drywall utility saw or jigsaw
• M6 screw eye bolt
• T20 torx wrench
• Ceiling hook
• Safety wire
• Carabiner
• Phillips screwdriver (M4)


www.dallmeier.com 

Cut a circular recess (Ø 169 mm) in the suspended ceiling using a drywall utility saw or
a jigsaw.
Screw the M6 screw eye bolt on the bottom side of the housing.
Unscrew the 3 housing screws using a T20 torx wrench and remove the trim ring.
Suspended ceiling
Ø 169 mm
M6 screw eye bolt
Ceiling clamp
Ceiling clamp
Trim ring with bubble
Housing screw
(T20 Torx)
Fig. 6-1

Screw a ceiling hook on the supporting structure.
Insert the housing into the circular recess.
Attach the safety wire to the M6 screw eye bolt (use a carabiner) and the ceiling hook.
Connect the required cables suspended from the ceiling to the connectors of the termi-
nal area (see chapter “Pin Assignment” on page 69).