Danfoss VLT AutomationDrive FC 360 User manual

Items Supplied
•
Standard FC 360 Control Cassette (132B0255)
•
Screws
Safety Instructions
Voltage [V] Power Range [kW] Min. waiting time
[min.]
380–480 0.37–7.5 4
380–480 11–75 15
Table 1.1 Waiting Time after Mains Disconnect
Mounting
1. Connect the control card and the frequency
converter bending the cable
Illustration 1.1
Illustration 1.2
Installation Instructions
VLT®AutomationDrive FC 360 Control Cassette
MI06C102 - VLT®is a registered Danfoss trademark 1

2. Place the control cassette on the frequency converter
and slide it into place.
Illustration 1.3
3. Fasten the control cassette on the frequency
converter using two screws (supplied). Tightening
torque 0.7 ~1.0 Nm
Illustration 1.4
*MI06C102*
MI06C102132R0208 Rev. 2012-11-29