Dascom DP-530 User manual

© 2015 DASCOM Europe GmbH, Drivers, User Manuals, and S Utilities available @ www.dascom.com 379923b - en
Printer features
Media Battery
DP-530
Quick Start Guide
This guide provides
information on t
he daily use of the DP
-
530
printer.
For additional information, please refer to the DP-530 User Guide.
NOTE:
hen using
2” paper,
install spacer
P/N: 93194
Press button to see
battery charge level.
4LED 100% charge
3LED 75%
2LED 50%
1LED 25%
Loosen
hand
strap
(not pictured) to
access battery
door.
Rotate knob 180
o
to unlock battery
door.
Drop in battery.
Close battery door
and rotate knob
180
o
to lock.
Press
Paper door release button to
open the paper compartment door.
Pull small leader of paper out and
close paper door. “ Clicks” when
properly closed.
Disposal
Please dispose the batteries separately and free of cost at your
sales agency or the designated local collecting points.
Therefore please consider the national recycling standards!
Disassembly and removal of the batteries are described in the
User Guide.
Paper door release button
USB Data Port
Power
Port
Control Panel
Paper Door
Tear paper
towards back of
printer

© 2015 DASCOM Europe GmbH, Drivers, User Manuals, and S Utilities available @ www.dascom.com 379923b - en
Control Panel indicators
Function:
ow to:
Power & Status
(Green/Red)
Battery
(Yellow)
Alert
(Red) Indication
Power Button
Power up
Power down
Toggle IP over
USB on/off
Press & Release
Press & Hold
Press Twice
On
X
On
Booting up
On
X
Off
Ready
On X Flashing Paper Error/Lid Open Paper feed button Advance paper
Print self-test
Press once
Press twice
Flashing
X
Off
Job is arriving
Flashing
X
Off
Job is printing
Flashing
X
Flashing
IP over USB active
Solid
Charging Battery
X
Flashing
X
Battery Low
Self-Test / Configuration print out
To print the configuration report and self-test: ith Power on, press the paper feed button twice quickly.
To access configuration menu refer to Operator’s Manual
USB Access to Printer Web Pages
1. Connect USB cable from printer to host
2. ith printer turned on, set the printer into configuration mode by double-clicking the PO ER button.
Both the Power LED and Fault LED will flash together.
3. Open browser on your host and type 169.254.200.1 into the address bar of the browser
(Note: Firefox or Chrome will work best) and hit Enter.
4. A login box should appear.
5. Type “0000” and hit Enter- you should now be at the home page for DP-530 Configuration.
6. To return the printer to normal operating mode, double-click the PO ER button.
The Power LED will be returned to a solid light.
Dascom Representatives
Americas Dascom Americas Corp 34 Lakeview Court Verona, VA 24482, USA Phone: [phone]
UK DASCOM GB Ltd Hart House, Priestley Road Basingstoke, Hampshire, RG24 9PU Phone: [phone]
Germany DASCOM Europe GmbH Heuweg 3 D-89079 Ulm Tel.: [phone]
France DASCOM Europe GmbH 117 Avenue Victor Hugo 92100 Boulogne-Billancourt Phone: [phone]
Singapore (AP) DASCOM AP Pte Ltd 21 Bukit Batok Crescent #29-81, CEGA Tower, 658065 Phone: [phone]
DP
-
530 Quick
Start Guide
Once the printer is connected via USB
and
in
IP over USB
mode it is temporarily not possible to access the Internet.