Datalogic MEMOR 20 User manual

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
©2019 Datalogic S.p.A. and/or its affiliates
wAll rights reserved. wWithout limiting the rights under copyright, no part
of this documentation may be reproduced, stored in or introduced into a
retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/
or its affiliates. Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation
for the purchaser’s own internal business purposes. Purchaser shall
not remove or alter any proprietary notices, including copyright notices,
contained in this documentation and shall ensure that all notices appear
on any reproductions of the documentation. Should future revisions of this
manual be published, you can acquire printed versions by contacting your
Datalogic representative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided on appropriate
media. If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know
via the “Contact Datalogic” page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this
manual that is complete and accurate, however, Datalogic reserves the
right to change any specification at any time without prior notice. Datalogic
and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other
brand and product names may be trademarks of their respective owners.
Support Through the Website
Datalogic provides several services as well as technical support through its
website. Log on to www.datalogic.com.
For quick access, from the home page click on the search icon , and type
in the name of the product you’re looking for. This allows you access to
download Data Sheets, Manuals, Software & Utilities, and Drawings.
Hover over the Support & Service menu for access to Services and Technical
Support.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables
(e.g. battery, power supply, cable etc.) from date of purchase at our
company.
Vehicle Dock
Quick Start Guide
822003301 (Rev. A) May 2020
©2019 Datalogic S.p.A. and/or its affiliates. All
rights reserved. Datalogic and the Datalogic logo
are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S. and the E.U.
www.datalogic.com
See the Safety & Regulatory Addendum included with
your product for additional regulatory, safety and legal
information.
Conventions
This manual uses the following convention:
"Dock". "Vehicle Dock" refer to the DOCK, VEHICLE, MEMOR 20.
Out of the Box
The Memor 20 Vehicle Dock package contains:
y Memor 20 Vehicle Dock
y Quick Start Guide
y Cigarette lighter adapter
y Safety & Regulatory Addendum
Remove all the components from their packaging; check their integrity and
compare them with all the packing documents.
Keep the original packaging for use when sending products to
the technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
CAUTION
Power the Dock
1. Plug in the cigarette lighter adapter into your vehicle’s cigarette lighter.
2. Connect the vehicle dock's USB cable to the USB connector of the CLA.
When the dock is powered, the Power ON LED lights up solid green.
Make sure your vehicle’s power source is between 10 to 30 VDC,
and is capable of supporting a 3000mA current drain. If you
have any concerns regarding this, refer to your vehicle owner’s
manual.
CAUTION
The cigarette lighter adapter must not be used if the battery car
is fully depleted.
CAUTION
To reduce quiescent current and extend battery life, disconnect
the vehicle dock when the car is not powered.
NOTE
Charge the Memor 20
The rubber boot is needed to insert the Memor 20 into the vehicle dock.
The rubber boot provides additional protection to the device and is available
as optional accessory (P/N 94ACC0247).
Insert the Memor 20 with the rubber boot into the dock with the screen
facing front and the head facing up.
Make sure there is nothing between the dock and the device.
Do not put any foreign object such as, but not limited to, coins,
paper clips, stickers inside the slot of any of the docks.
Do not apply any sticker to the Memor 20 (see the examples
below).
CAUTION
General View
Vehicle Dock
FOD (Foreign
Object
Detection) LED
Power ON LED
Power Jack
Install only on properly grounded mobile platforms. If this dock
is used on an electric vehicle, ensure that no part of the dock and
PDA can come into contact with the vehicle chassis. Electrical
discharges can develop on these vehicles, which can damage the
dock and/or PDA.
CAUTION
Do not install the dock on or near an airbag cover plate or a
blower.
Do not install it in a location that may affect vehicle safety,
visibility and driveability.
CAUTION

Do not attempt to charge any other device different from the
Memor 20 devices.
WARNING
Do not use the Memor 20 while driving. The user is responsible
for driving safely.
CAUTION
LED Indicators
LED Behavior Operation Status
Power ON
Solid green Dock is powered
Error
Blinks red (quick pulses) Foreign object detected, output power is disabled.
Blinks red (1 quick pulse,
1 long pulse, 1 quick
pulse)
Power supply error
In case of FOD led blinking, remove the foreign object.
CAUTION
Technical Specifications
Electrical Features
Power Supply (with CLA) From 10 to 30 VDC
Indicators Consumption Power on LED (green)
FOD LED (red)
Environmental Features
Working Temperature*-20°C to 50°C
Storage Temperature -30°C to 70°C
Humidity 5-95% non-condensing
Vibration Resistance EN60068-2-64
Shock Resistance EN60068-2-27
Mechanical Features
Dimensions 208 x 97.7 x 58 mm / 8.2 x 3.8 x 2.3 in
Weight 310 g / 10.9 oz
* Charging temperature range: 0° to 45° C