Delsys NeuroMap User manual

NEED ASSISTANCE?
SUPPORT TRAINING
North America [phone]
[email protected]
[phone]
[email protected]
Europe [phone]
[email protected]
[phone]
[email protected]
© 2019 Delsys Incorporated. All Rights Reserved.
NeuroMap
Quick Start Guide

Power USB Analog Output Connectors *Trigger
Electrical
Outlet Computer
*available on select Trigno base station models
1Connect Trigno®System
Connect the Trigno base station to an electrical outlet, and to your computer via USB.
!Optional: Connect third-party devices.
Digital, analog, and triggering capabilities are all available.
Contact [email protected] for more info.
3Experiment Set-up
Follow steps Ato Dto achieve high quality surface EMG signals.
4Record and Analyze Data
2Set up EMGworks®Software
Download a copy of EMGworks at www.delsys.com/emgworks/download. Run the installer and follow on-screen instructions to
install. Open EMGworks Acquisition and select Click to Activate, then enter your 32-digit license key and complete activation.
!
One Galileo Sensor will occupy 4 sensor slots
Refer to User Guide for pairing instructions
Diligent skin prep is required for successful collection
with Galileo Sensors
AB
Build your acquisition protocol and record data in
EMGworks Acquisition.
Decompose EMG and analyze motor units in
NeuroMap Software Suite.
Research
AOpen protocol in
your EMGworks
software.
BRemove Galileo
sensor(s) from
base station and
touch sensor(s)
to .
DClean a shaved
muscle site with
an alcohol wipe.
CClick , and
pair your
Galileo
sensor(s).
EUsing the
Adhesives, place
the circular head
over the muscle
and the
reference
elsewhere.