Delta BX 6.0 Specification sheet

Operation and Installation Manual
DELTA BX_6.0 Battery Pack
The power behind competitiveness
www.deltaww.com

05
05
05
05
06
06
07
08
08
12
12
13
16
17
17
18
23
26
28
29
30
31
Table of Contents
1 Safety
1.1 Information of the Battery Pack
1.1.1 Disclaimer
1.1.2 Target Group
1.2 General Safety
1.2.1 Condition of Use
1.2.2 Symbols
1.2.3 Safety Instructions
1.2.3.1 Handling of Prohibitions
2 Introduction
2.1 Valid Model
2.2 Product Overview
2.3 LED Indicators
3 Installation
3.1 Installation Environment
3.2 Mechanical Installation
3.3 Electrical Installation for DC(BT+/-)
3.4 CAN and RS-485 Communication Connection
4 Commissioning via Standalone Operation
5 Battery Pack Expansion
6 Trouble Shooting
7 Technical Data
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3

Figure 2-1 : Shipping Components of DELTA BX_6.0 Battery Pack
Figure 2-2 : Dimensions of DELTA BX_6.0 Battery Pack
Figure 2-3 : Overview of DELTA BX_6.0 Battery Pack showing without Battery Module
Figure 2-4 : Rating labels of DELTA BX_6.0 Battery Pack
Figure 2-5 : LED indicators of DELTA BX_6.0 Battery Pack
Figure 3-1 : Recommended Space for Installation
Figure 3-2 : Mounting bracket dimensions ( Unit: mm )
Figure 3-3 : Required position for at least 6 screws
Figure 3-4 : Permitted mounting positions
Figure 3-5(a) : The procedure for attaching the battery pack on the wall
Figure 3-5(b) : Attaching the battery pack on the floor
Figure 3-6 : Assemble the DC Connector
Figure 3-7 : Connectors on Cabinet (Zooming from Figure 2-3 )
Figure 3-8 : Overview of Communication Connectors
Figure 3-9 : Suitable cables for RJ45 connector
Figure 3-10 : Installing Procedure of Communication Connectors on the Cabinet
Figure 5-1 : Expanding the Battery Pack with DC(BT+/-) cables and Ethernet cable (See Section 3.3 and 3.4)
Figure
13
14
14
15
16
19
19
20
20
21
22
25
25
26
27
27
29
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .
. . .
Table
Table 2-1 : Packing list of DELTA BX_6.0 Battery Pack
Table 2-2 : Rating label explanation of DELTA BX_6.0 Battery Pack
Table 2-3 : LED Indicators
Table 3-1 : Maximum Current Ratings for Power Cables
Table 3-2 : Communication Definition of DELTA BX_6.0 Battery Pack
Table 6-1 : Trouble shootings for DELTA BX_6.0
Table 8-1 : Specifications for DELTA BX_6.0
13
15
16
25
26
30
31
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4

Copyright – DELTA ELECTRONICS, INC. - All rights reserved.
This manual accompanies our product for use by the end users. The technical
instructions and illustrations contained in this manual are to be treated as
confidential and no part may be reproduced without the prior written permission
of DELTA ELECTRONICS, INC. Service engineers and end users may not
divulge the information contained herein or use this manual for purpose other
than those strictly connected with correct use of the product. All information and
specifications are subject to change without notice.
DELTA ELECTRONICS, INC. shall have no obligation to both personal injury
and property damage hereinafter with respect to any actions -- (a) the product
has been installed and repaired improperly; (b) the product has been misuse
without following the instructions on this user manual; (c) the product has failed
due to incorrect unpacking.
1 Safety
1.1 Information of the Battery Pack
1.1.1 Disclaimer
This user manual of the battery pack is prepared for a person who is well-trained
for installing, commissioning, using, and doing maintenance. The well-trained
person must have the following basic and advanced skills:
• The fundamentals of electricity, wiring, electrical components and electrical
schematic symbols.
• Knowledge of how a battery pack works and is operated.
•
Training in the installation and commissioning of electrical devices and installations.
• Training in how to deal with the dangers and risks associated with installing
and using electrical devices and installations.
• Compliance with this manual and all safety information.
Please read the user manual before working on the product.
1.1.2 Target Group
Safety
5

1.2 General Safety
- Please read these instructions carefully and keep them for later use.
IMPORTANT SAFETY INSTRUCTIONS : SAVE THESE INSTRUCTIONS !
To prevent any personal injury and any property damage, also ensure long-term
operation of the battery pack, you must read this section carefully and review all
the safety instructions at all times before using this battery pack.
This user manual provides important instructions for DELTA BX_6.0 Battery Pack.
The product is designed, tested, verified, and certified according to international
safety requirements, regulations, and standards but precautions must be observed
when installing and operating the product.
The DELTA BX_6.0 Battery Pack is a battery pack designed with two battery
modules which provides energy storage function compatible with DELTA E Series
hybrid solar inverter.In order to prolong Lithium-based batteries' life, 100 %
state of charge (SOC) shown on the Delta E Series hybrid solar inverter is
actually within the range of 95%~100%.
The battery pack can be charged/discharged from the hybrid inverter, which
provides electricity to household loads and electricity supply backup is available.
The benefit of DELTA BX_6.0 Battery Pack is the availability of household
electricity during night time, while photovoltaic panel provides electricity during
day time.
1.2.1 Condition of Use
6
Safety

This section describes the definition of the symbols in this manual.
In order to prevent both personal injury and property damage, and to ensure
long-term operation of the product, please read this section carefully and follow
all the safety instructions while you use the product.
1.2.2 Symbols
DANGER!
- This warning indicates an immediate hazard which will lead to death or serious
injury may occur.
- This warning indicates a possible hazard which may lead to minor injury
may happen.
CAUTION !
WARNING !
- This warning indicates a possible hazard which may lead to death or serious
injury may occur.
- This warning indicates a possible damage to property and the environment
might happen.
ATTENTION
- Additional information is indicated by an exclamation mark enclosed by double
circle. This means the following section contains important information and
user should follow the instruction to prevent any hazards.
INFORMATION
DANGER : ELECTRICAL HARZARD!!
- This warning indicates an immediate electrical hazard which will lead
to death or serious injury may occur.
- Equipment grounding conductor (PE)
- (PE) Équipement conducteur de terre
Safety
7

The battery pack should not be installed in direct sunlight or on flammable
surfaces. Please be sure to mount the battery pack tightly on a solid / smooth
surface. The optimal temperature range for the battery pack to operate is 10 to
30℃. The operating humidity is within the range from 0 to 90%. If the ambient
temperature is outside the operating range, the battery pack stops to protect
itself from any unexpected damage.
This battery pack should be installed by a trained and experienced installer
designated by the retailer. Having the product installed by a non-specialized
installer is very dangerous and can cause damage or injury. The battery pack is
always installed by 2 or more people.
Please make sure any breaker is turned off before connecting cables. Be careful
of the cable length : Must be less than 100 meters.
1.2.3 Safety Instructions
The battery module contains flammable materials such as organic solvents.
Mishandling the battery module may cause fire, smoke, or an explosion and the
battery module’s functionality will be seriously damaged. Protection circuits are
designed into the battery pack via BMSS (PCB part inside the battery cabinet)
to protect the battery modules.
Please read and check the following prohibited actions.
1.2.3.1 Handling of Prohibitions
8
Safety

(1) Electrical Shock
Do not touch the terminals of the battery module without protectors.
Be grounded with the specified conditions.
High voltage may occur between the positive and the negative terminals.
Electric shock impairs health or may cause threat to life.
More than 2,000 meters higher, risks of an electric shock will be increased.
(2) Immersion
Do not immerse the battery module in liquid such as water, beverages, or
other fluids.
Do not expose to corrosive substances such as sea breeze, steam or chemicals.
Do not install in the humid places or places to condensation.
Exposure to liquid may damage the battery module or the circuit board.
This may cause a battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
(3) High Temperature
Do not use or place the battery module near an open flame, heater or high
temperature. Subjecting the battery module to high temperature may damage
the separator and cause internal short circuit.
This may cause the battery module's damage to leak electrolyte, generate heat,
smoke, catch fire, or explode.
(4) Charge Conditions
Only charge the battery module within the specified conditions.
(e.g., temperature range, voltage, current and etc.)
Charging with unspecified conditions (e.g., over charge or abnormal current)
may cause the battery module's damage to leak electrolyte, generate heat,
smoke, catch fire,or explode.
(5) Reverse Polarity
Check the positive (+) and the negative (-) terminals.
If the battery module is connected with a reversed polarity, unexpected
reactions may occur.
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
DANGER!
- This warning indicates an immediate hazard which will lead to death or serious
injury may occur.
9
Safety

(6) Direct Connection
Do not connect the battery module to AC power or unspecified DC power.
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
(7) Use in Other Equipment
Do not use the battery module for any other purposes or connecting
unspecified equipment.
If the battery module is used with unapproved applications or systems, the
battery module may be damaged, leak electrolyte, generate heat, smoke,
catch fire, or explode.
(8) Incineration and Heat
Keep the battery module away from heat and fire.
Heating the battery module and may cause it to be damaged, leak electrolyte,
generate heat, smoke, catch fire, or explode.
(9) Short-Circuit
Do not connect between the positive (+) and the negative (-) terminals with
a conductive material (e.g., wire, a cable, etc.).
Do not carry or store the battery module with metal objects.
If the battery module is shorted, the battery module may be overheated.
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
(10) Disassembly
Do not disassemble or modify the battery module.
Disassembly or modification of the battery module may damage the
protection circuit.
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
(11) Charge in High Temperatures
Do not charge the battery module in high temperature environment.
If the battery module is charged with exposing high temperature, the battery
module’s protection circuit may be activated and stop or fail the charging.
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
10
Safety

WARNING !
- This warning indicates a possible hazard which may lead to death or serious
injury may occur.
(1) Magnetism
Do not place the battery module near strong magnetism. (e.g., electromagnetic
cooker, etc. )
This may cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
(2) Mixed Use
Do not mix with other batteries.
The battery module should not be used with other batteries having a different
capacity, chemistry, manufacturing date or manufacturer.
This could cause the battery module's damage to leak electrolyte, generate
heat, smoke, catch fire, or explode.
- This warning indicates a possible hazard which may lead to minor injury
may happen.
CAUTION !
(1) Exposure to Direct Sunlight
Do not use or leave the battery module in a location exposed to excessive
heat, such as in direct sunlight or in a car. It could cause the battery module's
damage to leak electrolyte, generate heat, smoke, catch fire, or explode.
It may also cause the battery's performance and life to deteriorate.
(2) Charging Temperature Range
Only charge the battery module within operating temperature range.
Charging outside of this temperature range could cause the battery module's
damage to leak electrolyte, generate heat.
It may also cause the battery module's performance and life to deteriorate.
(3) Manual
Please read the system manual or the specfication before use.
Keep the system manual together with this specification for future reference.
(4) Recycling
When disposing of the battery module, recycle it according to local rules
and regulations.
11
Safety

The DELTA BX_6.0 Battery Pack is designed to enable the highest levels of
efficiency and provide longest operating life of the battery by state-of-the-art
technology. It is suitable for outdoor use.
The user manual is valid for the following device types :
• DELTA BX_6.0 Battery Pack
This user manual must be followed during installation, operation, and maintenance.
The DELTA BX_6.0 Series have 1 model as shown in Figure 2-2. Delta reserves
the right to make modifications to the content and technical data in this user
manual without prior notice.
2 Introduction
2.1 Valid Model
12
Introduction

The shipping components of DELTA BX_6.0 Battery Pack are shown as Figure 2-1.
Figure 2-2 shows the dimensions of DELTA BX_6.0. Figure 2-3 shows the details
of each portion without battery modules.
2.2 Product Overview
BX_6.0
Object Qty Description
1 Delta BX_6.0 1 pc
1 pc
1 set
Battery Pack
5 RJ45 Connector 1 pc Communication connector
2 User Manual
Important instructions for Battery Pack
Safety instructions should be followed
during installation and maintenance
3 Mounting Bracket Wall mounting bracket
4 BT Connector 2 sets DC connector for power cable
Table 2-1 : Packing list of DELTA BX_6.0 Battery Pack
Figure 2-1 : Shipping Components of DELTA BX_6.0 Battery Pack
①
②
⑤④
③
13
Introduction

Figure 2-2 : Dimensions of DELTA BX_6.0 Battery Pack
Figure 2-3 : Overview of DELTA BX_6.0 Battery Pack showing without Battery Module
552 mm
BT- BT+
CAN RS-485 Comm.
Standalone Switch
Battery Cabinet
Lid
Wall-mounting Bracket
(Two Pieces besides Cabinet)
200 mm
596 mm
14
Introduction

The following Figure 2-4 shows the rating labels of DELTA BX_6.0 Battery Pack
and the table (Table 2-2) along with these labels explains the definition of the
specific mark.
Figure 2-4 : Rating labels of DELTA BX_6.0 Battery Pack
Symbol Definition
Before working with the Battery Pack, you must read the supplied
manual and follow the instructions contained therein.
The housing of the Battery Pack must be grounded if this is required
by local regulations.
WEEE marking
The Battery Pack must not be disposed of as standard household
waste, but in accordance with the applicable electronic waste
disposal regulations of your country or region.
Table 2-2 : Rating label explanation of DELTA BX_6.0 Battery Pack
15
Introduction

The DELTA BX_6.0 Battery Pack has three different LED notification colors on
the front cover of the battery pack that signal various system statuses:
2.3 LED Indicators
Figure 2-5 : LED indicators of DELTA BX_6.0 Battery Pack
Table 2-3 : LED Indicators
Definition
Warning occurred
Fault occurred
Standby mode
Normal operation mode
Charging
Discharging
Upgrading firmware
LED Status
Flashes red steadily
Stays red
Flashes green steadily
Stays green
Flashes yellow steadily
Stays yellow
Three LED flash steadily
Communication failThree LED keep lighting
16
Introduction

The chapter contains instructions for (1) Installation environment
(2) Mechanical installation; (3) Electrical Installation; (4) Communication setup.
3 Installation
WARNING !
- Do not install the battery pack near or on flammable surfaces.
- Please mount the battery pack tightly on a solid / smooth surface.
- The optimal temperature range for the battery pack to operate is 10 to 30℃.
- If the ambient temperature is outside the optimal operating range, the battery
pack will be derating.
- The operating humidity is within the range from 0 to 90%.
- If the ambient temperature is outside the operating range, the battery pack
stops to protect itself from any unexpected damage.
CAUTION !
3.1 Installation Environment
Please avoid using in the following condition; otherwise the device may malfunction.
• Locations where IP55 isn't satisfied.
• Locations where temperature changes severely.
• Locations where the device is directly exposed to saltwater, sea breezes and
high humidity.
• Locations that are or might be affected by explosive, combustible, corrosive
and other poisonous gases.
• Location exposed dust and dirt.
• Location with poor ventilation.
• Locations with other special conditions.
• At altitude above 2000m.
The battery pack is designed to be waterproof and can be installed both indoors
and outdoors. However, please avoid exposure to direct sunlight, high temperature
and high humidity if installed outdoors.
17
Installation

3.2 Mechanical Installation
- Please make sure that the battery pack stands on the floor when mounting it to
the floor or to a wall.
- Please check the space for installation which meets the recommended location.
- Remember that we will in no way be responsible for damage resulting from the
battery pack falling due to insufficient mounting strength.
ATTENTION
This battery pack is designed to be wall-mounted or to stand on the floor fixed.
Please ensure that the installation is perpendicular to the floor.
Please follow the instructions as shown from Figure 3-1 through 3-5.
Please make sure there is enough room for the battery pack, especially in front
of the battery pack (LED indicators).
- Please fix at least 6 M8 Phillips head screws for the wall mounting bracket.
- The bracket shipped with the battery pack is specially designed and should be
the only mounting device for the mechanical installation.
- The wall used for mounting should be 90°±2° to or the horizontal reference.
- Make sure there is enough room for the battery pack, especially in front of it.
- Always install the battery pack with 2 or more people.
CAUTION !
WARNING !
- This battery pack should be installed by a trained and experienced installer
designated by the retailer.
- Having the product installed by a non-specialized installer is very dangerous
and can cause damage or injury.
18
Installation

Figure 3-1 : Recommended Space for Installation
Figure 3-2 : Mounting bracket dimensions ( Unit: mm )
100 mm 100 mm
100 mm100 mm100 mm
657
617
437
377
317
257207
Φ11
19
Installation

Figure 3-3 : Required position for at least 6 screws
Figure 3-4 : Permitted mounting positions
- Please follow the instructions above such as required position for 6 screws and
permitted positions for the correct installation.
CAUTION !
Necessary for wall-mounting bracket
90°
20
Installation