Delta Dometic CDF 11 User manual

DELTA VEHICLE SYSTEMS |www.deltavs.com | Copyright 2021
DELTA VEHICLE SYSTEMS | 12237 V1.0A
Dometic CDF 11 Fridge Mount

1
Overview
Congratulations on your purchase of the DELTA Vehicle Systems Dometic CDF 11 Fridge
Mount. This mount has been designed in CAD, CNC laser cut, formed, fabricated, and
powder coated 100% in the U.S.A.
Product Compatibility
This product is compatible with the Dometic CDF 11 Electric Cooler. It can be mounted on
just about any flat surface, but is designed to work seamlessly with the DELTA 80 Series
Land Cruiser/LX450 Center Console Base & other DELTA products.
Packing List
ID Number
Description
Quantity
12335
Mount Baseplate
1

12336
Mount Bulkhead
1

12334-3
Rear Tie Down Tab
1

12334-4
Front Tie Down Tab
1

10780
#10-24 Nyloc Flange Nut
4

11370
#10-24 Button Cap Screw
4

10864
7.5” Zip Tie
4

Packaged By _______________
Tools
•1/8” hex key
•3/8” box end wrench

2
1
The mount is shipped to you in two
pieces, the baseplate and the
bulkhead. The bulkhead has tabs
that slot in between the tabs on the
baseplate as shown in the photos.
Each side has two holes, which will
be used with the included button cap
screws & nuts to secure the two
pieces together.
There will be a gap left between the
baseplate and the bulkhead, this is
so that you can route the fridge’s
power cord down & underneath the
baseplate.
Main Assembly
2
You can now set the fridge in place
on the mount and insert each of the
tie down tabs through the slots on
the front and back of the fridge
(shorter in the front, longer in the
back).
These tabs provide a place for each
of the latches to grab, but they likely
won’t work perfectly out of the box.
Each latch is threaded so that you
can adjust their lengths. Do this for
each latch so that they hold the
fridge securely, but can still be
actuated without too much difficulty.
Secure any extra cord length under
the rear portion of the fridge mount,
using the included zip ties & the
holes cut into the baseplate.
Set Fridge in Place & Adjust Latches

3
3
DELTA also offers a cubby add-on
(sold separately) for storing all your
snacks and loose change. If you
have one, you can now attach it to
your fridge mount using its included
hardware.
Optional Cubby Add-On
4
Now that the latches are adjusted, all
that’s left is to remove the fridge and
install the mount wherever you want
it. If you have an 80 series Land
Cruiser/LX450, we recommend the
DELTA 80 Series Land
Cruiser/LX450 Center Console
Base, but you can use just about any
flat surface you can put holes in.
The fridge is shown in this photo
mounted in a vehicle with the center
console base as well as a DELTA
shifter console and the
aforementioned cubby add-on (all
sold separately), each of which is
designed to smoothly integrate with
one another.
Whatever you choose to do, we
hope you enjoy your newly mounted
fridge!
Install Mount Somewhere