Dension ice Link Gateway 100 User manual

USER’S MANUAL
ice4Link Gateway
100/200/300
V2.01
State of the art car integration
for media players, USB and
Bluetooth devices

Warning!
Do not allow the player to distract you from
driving! Operate the unit only when stationary or
ask passengers to operate it for you. Neither
Dension Audio Systems Ltd, its regional oces,
distributors or resellers accept any responsibility for
any damage or injury as a result of using ice>Link
Gateway while driving! Exercise good judgment
and keep your eyes on the road at all times!
Warranty
The Dension ice>Link Gateway carries one year
limited warranty that protects you from defects
in material and workmanship of products sold by
Dension or its authorised distributors and retailers.
We do not warrant any installation work or damage
due to negligence, improper installation or
operation. For claims a proof of purchase is
required.
If you need assistance in using this product, please
contact your local supplier or visit:
http://support.dension.com, where you nd
comprehensive and up to date Knowledge Base
support on FAQs, rmware upgrades, trouble
shooting, or you can contact technical support stu.
Disclaimer
Dension Audio Systems Ltd, its regional oces,
distributors or resellers are not liable for any
incidental, consequential or indirect damages. In
case of any kind of erratic behavior of your car’s
electrical system, please disconnect your ice>Link
rst and have it checked by your installer. Dension
does not assume liability for any diagnostic fees.
1

Introduction
ice>Link Gateway is a vehicle-specic media
playerintegrationkit,thatenablesCD-qualityaudio
and safe control from the vehicle’s entertainment
system. Supported devices depend on the kit or
accessory you have purchased:
Acc: feature requires an optional accessory.
If you have not purchased this, but you
require it, please contact your retailer
for a retrot installation.
iPod: 4G/5G, photo, color, mini, nano 1G/2G.
USB: Flash or hard disk drives (mass storage
devices)
Formats: MP3/OGG/WMA (unprotected)
and uncompressed PCM-WAV.
Playlist formats: M3U, PLS. File system:
FAT16/32 on the rst primary partition.
Bluetooth: BTA1000 Accessory supports headset
prole (HSP) and A2DP/AVRCP
proles for audio playback and
handsfree prole (HFP) for handsfree
telephony.
PND: Portable NavigationDevices.Thisfeature
is under development. See an up to date
list of supported devices at
http://www.dension.com/pnd
2
Gateway Aux In iPod USB Blue-
tooth PND CDC IVE
100 -Acc -Acc
200i - - - - Acc
200BTi - - - Acc
300 Acc -Acc

CDC: CDR1xxx: car specic accessory to
retain the original CD-Changer.
IVE: Video Extender (IVE1000) extracts A/V
signals of 5th Gen (video) iPod for a video
monitor or for rear seat entertainment
systems.
This manual assumes that the Gateway interface
is already installed in your vehicle. For assistance
with installation please refer to the installation
guide. Regarding the general use of the media
player, or its related software (as iTunes, creating
playlists, etc.) please consult the related operating
manuals.
Getting started
Is your player up-to-date?
Before you start, please check your player’s
rmware, and make sure it is upgraded to the
latest version. For iPod rmware visit http://www.
apple.com/support/ipod. Dension only guarantees
proper functionality with the latest version of
rmware.
Study your radio manual!
Please study the owner’s manual for your radio.This
guide cannot provide detailed support regarding
the various system-specic features, e.g.:
•CD changer and disc selection
•Next/Prewious Track, Fast Forward and
Rewind (FF/REW)
•Repeat, Random (aka Shue or Mix), Scan
•Display and text conguration, automatic
scroll, etc.
If your radio handles only 5 CD’s, the Disc5 & 6
Gateway functionality will be shifted to Disc4 & 5
respectively (i.e. Disc4 functionality is removed).
3

4
Enabling text display
Some car radios can display song information
or browse music content. This feature is
manually enabled during installation. Pelase visit
http://support.dension.com/enabletext
for a current list of radios that support this feature
and instructions on how to enable it.
Playback control
Select the CD changer source on the radio and
the last used player source will start playback
automatically.
Deselecting the CD changer or switching o
the radio will pause the media player. Generally
players turn o automatically after a few minutes.
Playback control buttons on the radio (NEXT, BACK,
FF, REW, Repeat, Scan) work as expected.
Notes:
•Certain USB media player devices do not
support FF/REW operation in media player
connectivity mode. Also Next/Previous Track
may take longer than usual.
•The Track number displayed on the radio is
limited to 2 digits; the real track number is
always truncated as such.
•If the iPod is in Stop mode at connection or
at the rst connection of a USB device, the
Gateway will start PlayAll. In any other
scenario, playback continues from the last
position.
• Random may work dierently on iPod/USB
and car radio and the radio may be out of
synchrony withtheiPodorUSB.ToturnRandom
o rst switch it on again then switch it o.

5
Source Selection & Operation
Summary
Source devices are assigned to various Track#
on Disc6. When you select Disc6, the Track#
indicates the current source. This may take a few
seconds, depending on the radio. By changing
the Track# you can select a new source device.
Conrm source selection by pressing FF. To quit a
function press REW or wait for 30 seconds until the
functions time out.
Disc5 is a “parking position” for some Gateway
operations, i.e. after a function has been executed
(or after certain time out) the radio will return to
Disc5 automatically and waits for new commands.
In Parking the Next/Back/FF/REW works as
expected, while other Disc selections result these
buttons controlling their respective functions.
Below table summarize the operations assigned
to Discs:
Aux
iPod User
Interface
iPod Gateway
Interface
1 2 3
6Source Select: Set Track # + press FF
5Parking Parking Parking & Play_All
4
-
Scan/Back Chapter
-
3
-
Scan/Back Album Scan Album
FF=AlbumPlay
2
- -
Scan Artist
FF=ArtistPlay
1
-
Scan/Back Playlist Scan Playlist
Track
Disc #

6
Track
Disc #
USB Bluetooth
Audio
Bletooth Hands
Free
4 5 6
6
Source Select: Set Track # + press FF
5Parking & Play_All Parking
Parking
Next=“Green button“
Back=“Red button“
4
- - -
3Scan Album
FF=AlbumPlay
-
Enable/Disable
Hands free operation
2Scan Artist
FF=ArtistPlay
-
Last Number Dial
1
Scan Playlist
or Folder
FF=FolderPlay
Pairing Pairing
Reserved PND Media
Player
Original CD-
Changer*
7 8 9
6
Source Select: Set Track # + press FF
5
-
Parking Disc_6
4
- -
Disc_4
3
- -
Disc_3
2
- -
Disc_2
1
- -
Disc_1
Track
Disc #
Note: If you see Gateway is in Parking (Disc5 is
indicated), but you want to start PlayAll, please
select Disc6 temporarily, than press Disc5.

7
Operation in Detail
About Sources
•In AUX mode radio displays Track99 and a
dummy time counter. AUX input and iPod’s
audio signals are shared. Connecting both
devices to Gateway sounds will be mixed.
•iPod User Interface: the iPod functionality
remains normal, but additional control from
the radio or steering wheel is available. Track#,
Time and Song information on the radio is
invalid. Use this mode for video playback.
• iPod Gateway Interface: iPod’s click wheel is
disabled, iPod displays the currently played
song information. iPod control is possible
from the radio or steering wheel, Track#, Time
and song information is displayed (if the radio
supports). For content browsing, you can set
the iPod before connecting it to the Gateway
or use the Gateway Browser if the radio sup-
ports this. Video playback on the iPod is not
possible.
•When selecting an unsupported device, or
if a supported device is not connected, the
Gateway will exits the selection menu without
any change.
•Connecting a new device the playback
automatically switches to this new device.
•Disconnecting a device the most recently
played device or the highest priority available
device will start playing.

8
• Connection or disconnection of a device
initiates a Magazine Eject/Load sequence,
which may cause transient information on
the radio display. If the radio switches to tuner
(FM) mode, reselect CD changer manually.
This is the normal behavior of certain radios.
For example you are listening to an iPod in
Gateway mode and you want to select Aux input
as the source:
Press Disc6 (or select it with +/- Disc buttons).
Track3 will be displayed on the radio.
Press Back 2 times or set Track1 with the jog
wheel.
Press FF (or a dedicated Select button on
some radios)
Scan Playlist, Folder, Artist, Album &
Chapter
Selecting Disc 1-4 the Next/Back Track buttons
will start playback of the next/previous Playlist or
Folder, Artist, Album and Chapter, respectively.
Please refer to the Summary table on page 5. This
way you can scan the music content, even if you do
not have a text capable radio.
Ones you nd the music you wish, press REW to
exit the Scan mode.
ArtistPlay & AlbumPlay
When selecting Disc 1-3 you enter Scan/Back
mode as described above, however you are still
hearing the currently playing song. Pressing FF
starts playback from the rst song of the Folder,
Artist or Album. This is a great feature if you listen
to large music collections randomly and you want
to hear the whole album containing the currently
played song or all the songs of the current artist.
•
•
•
•

9
At the end of Artist- or AlbumPlay the iPod will
stop, and USB player will continue the original
playback program. This feature is not available in
iPod UI mode.
For example you are listening to the Beatles song
“Yesterday”, which is on the album “Help”:
By selecting Disc2 (Artist):
Next: will play e.g. Cranberries (next artist
following the Beatles)
Back: will play e.g. Abba (the artist before the
Beatles)
FF: will start to play all Beatles songs
By selecting Disc3 (Album):
Next: will play “Irish Jigs&Reels”by Various Artists
(the album folllowing “Help” )
Back: will play “Goodby” by Cream (the album
before “Help” )
FF: will start to play the whole album “Help”
About USB
Playlist and Folder control is combined, playlists
are sorted rst.
Artist and Album operations are based on scanning
the ID3 tags of the music content. As a result of a
background database building, an index le is
stored on the USB drive which is used next time.
Depending on the capacity of the drive the whole
database building may take some time (~0.5 GB/
minute). During the process you may not have
access to the entire content. On browsing capable
applications an “!” (exclamation mark) indicates
those Menu entries, which may not be complete.
On certain head units this status is not refreshed
automatically, you must enter into a directory and
exit to have it updated.

10
Files without ID3 tags will be not added to the
database, so you can’t reach them by browsing this
way. Use folder based navigation to search the real
le stucture. Before disconnecting the USB drive,
select another source and wait until its LED goes
o or stops blinking.
Hint: Playlists and folders are sorted in
alphabetical order. Prex these with numbers to
make them available in a desired sequence (e.g.
1Rock, 2Pop, 3Classic, etc.) This may make content
browsing simpler.
About Bluetooth
Pairing
BTA1000 stores the last 4 paired devices. At
power on, BTA1000 connects automatically to the
latest available device in the order of previous
connections.
To manage pairing, BTA1000 assigns commands
to various Track#s of Disc1. To activate a command
select Disc1, set the relevant Track# and press FF.
Track1
Connect: Set up a new connection with all available
profiles. It does not matter in which profile you ope-
rate this function, Gateway will connect all profiles to
the same Bluetooth device. Enter Pin# 0000 on the
Bluetooth device .
Track2
Disconnect current device. Use this command
before switching
from the current device to a new one.
Track3
Clear list of paired devices. Use this command if
you do not want to connect a particular
device to the Gateway any more.

Audio
BTA1000 supports A2DP/AVRCP and HSP proles
for audio playback. Due to limitations of these
standards no song information is provided by the
Bluetooth device and only Next/Back/Pause/Play
functions are available from the car radio or the
steering wheel.
Note, that with certain Bluetooth devices:
•Playback remote control may not be
available
•The media player may have to be started/
stopped manually
Navigation Prompts from a Bluetooth device
If your device runs navigation software, then
select Bluetooth Audio to hear navigation
prompts. During this, you may or may not be able
to listen music from the device’s media player,
depending on its software characteristics.
Hands Free Calling
To initiate a call, rst select Bluetooth Hands Free
as source device (Disk6/Track6).
To start Voice Dialing simply press Next Track.
To Redial the last number, select Disc2 and press
FF to conrm. Depending on your phone this will
dial the last incoming or outgoing number, on the
same way as the green button on the phone.
11
Track4
Advanced pairing; disconnects the current de-
vice from the selected prole and starts a new
pairing for the selected prole only. This allows
to connect dierent devices for Audio and Hands
Free use.
Track5
Restart connection process.
Useful if BTA1000 loses the connection with a
Bluetooth device for any reason.

12
Incoming calls automatically activate Bluetooth
Hands Free source if any other Gateway source is
selected. To Accept or Reject the call use Next or
Previous Track buttons. After nishing the call,
the Gateway will return to the original source.
If the Radio or CD is selected, than an incoming
call mutes the radio briey allowing you to hear
the phone ring. By selecting CD changer source,
Bluetooth Hands Free activates automatically and
Next/Back track will accept or reject the call as
above. After nishing the call, you can switch back
to the radio manually.
Enable/Disable Handsfree operation
If you do not want to use the Gateway for Hands
Free operation (e.g. you have installed another
Hands Free kit), select Disc3 and the properTrack#,
than press FF.
Track1 Enable Hands Free operation
(factory default)
Track2 Disable Hands Free operation
BTA1000 will not pair and connects as HFP.
About PND
To listen music from the PND’s media player, select
Disc6/Track8 and control playback on the PND.
You can use also radio or steering wheel buttons
for basic media control playback.
The navigation prompts fade in and out
automatically if a Gateway source is playing.

13
If you are listening to a radio station, then
depending on the car radio type, one of the
following options will happen:
•Announcement in the two front speakers
•Announcement in PND speaker while radio
mutes
About Original CD Changer
To select CD changer press Disc6/Track9 then FF.
Changer works as originally.
To return to Gateway sources, toggle Repeat,
Random or Scan modes, or press Pause, Play, Pause
in less than 5 seconds, whatever buttons are easily
available on your car radio.
IMPORTANT!
At least one CD must be loaded in the magazine. If
you do not load any CD, then you cannot return
from CD changer mode to Gateway by pressing
a button. Connect an iPod or a USB drive to exit CD
changer mode and select another source.
Browsing capabilities
Some cars enable the Gateway to display song
information and browse music. Not every CD Text
capable radio is browser compatible. Please refer
to the knowledge base at http://support.dension.
com for an up to date listing.
In text capable applications Disc6 oers a menu,
including Source Selection and direct Playlist,
Artist, Album, etc. browser. To navigate in the
menu use:

14
Some cars equipped with dedicated Select
buttons or joystick mounted on the steering wheel
buttons. Of course these can be used as well.
AtmultilineapplicationstheGatewayautomatically
segments long lists into Pages. The rst and last
line in such a paged list jumps to the previous or
next page.
When there is a long list of Artist or Albums, the
Gateway browser may insert a virtual item, called
ABC-SEARCH. By selecting this, the elements of
the list will be sorted in alphabetical groups, so
accessing an artist begining with “Z” does not
require to scan through all of the artists.
Mark ” >” before a line indicates, that by selecting
the item you go one level deeper in the browsing
hierarchy.
A line without mark is already a song that can be
played back by selecting it.
In browser capable applications the Scan Playlist,
Artist, Album, etc. functions has less use, however
the ArtistPlay and AlbumPlay functions still
provide added functionality.
The browser is not available in iPod-UI mode.
Next/Back Track
or turn Jog-Wheel To select an item in the menu
FF
or press Jog-Wheel To enter the selected item or start a
song
REW To exit the menu level

Troubleshooting
You cannot switch your radio to CD changer
mode:
1. Check cables to make sure everything is tight.
2. Reset Gateway device by disconnecting the
power connection or remove the fuse of the
car’s audio system for a few seconds. You may
need the security code to reactivate the radio.
3. Consult with your installer or contact your
local Dension support.
You cannot control the iPod from the radio:
1. Make sure the rmware on your iPod is the
most recent. For updates please visit
http://www.apple.com/support/ipod
2. Reset the iPod. On the click-wheel iPods hold
the centre button and the Menu buttons.
(Resetting will not erase your music, it will
only restart the operating system of iPod.)
iPod does not turn on:
1. Verify that the iPod’s battery is not depleted.
Gateway is not able to power up a completly
empty iPod. Please charge the iPod with
another charging device at last 15 minutes.
Gateway works well with USB ash drives but
do not work with a hard disk:
Hard Disk applications are critical to the power
budget.
1. Use the original USB cable included with the
hard disk.
2. Remove the USB extension cable delivered
with the Gateway device.
15

3. Use the UPB1000 Power Booster Accessory to
generate more power for the hard disk.
Firmware Information:
1. At startup of the system (when turning on
ignitionandtheheadunit),the connectediPod
will show the Gateway software version in the
upper right and the selected car conguration
in the upper left corner of the “Warning!
Don’t browse while driving” splash screen.
You have to refer this information contacting
Dension’s Technical Support.
16

For up to date information about available
Gateway accessories visit Dension’s WEB Site at
http://www.dension.com/accessories
Apple, iPod, iTunes, USB and Bluetooth are
registered trademarks of their respective holders.

DEGWX-9203-2