Dentsply Sirona X-Smart IQ User manual

Getting Started Guide
Just a few images to help you set up your motor easily
and get the most out of it.
X-Smart IQ™

X-Smart IQ™ Getting Started Guide
2
iPad® set-up
!
The following steps
must be performed
before installing the
iPad mini™ in the
protective case.
AActivate the AssistiveTouch feature
The AssistiveTouch feature allows to emulate the iPad
mini™ Home button which is not accessible when in the
protective case.
Accessibility AssistiveTouch
BActivate the Bluetooth®
The connection between the motor handpiece and the
application is done via Bluetooth®.
Bluetooth®
C Activate the Wi-Fi
Wi-Fi is necessary to download the application from the
App Store®.
Select the Wi-Fi network and enter your password to connect
the iPad mini™.
Wi-Fi
D Set the volume to maximum
E Download the application from the App Store®
If you do not already have an Apple ID, follow the procedure
on the “http://www.apple.com/support/appleid/” website.
Dentsply Endo IQ
Files*
AC adapter
Handpiece protective
sleeves samples (5x)
iPad Mini™
protective
case*
Rubber plugs
and foams*
Spray nozzle
(used for
lubrication)
Contra-angle
Motor handpiece
Motor handpiece
support and case
Getting Started
Guide
* Depending on the kit
Accessories
for iPad Mini™
1, 2 or 3
Accessories
for iPad
Mini™ 4
1
Package contents

X-Smart IQ™ Getting Started Guide
3
Hardware installation
!
Only for first
use, please fully
charge the motor
handpiece
(~ 6 hours) to
optimize battery
life.
G
A According to your iPad
Mini™ model, use the
suitable kit.
B Stick the foams of
your kit at the places
indicated on the
protective case.
Accessories for iPad MiniTM 1,2 or 3 Accessories for iPad MiniTM 4
!
CEnclose and center the iPad MiniTM
in the protective case. Place the
corresponding rubber plugs on the
camera and the charging port.
DSeparate the motor
handpiece cover
from the motor
handpiece support.
For iPad Mini™
1, 2 or 3
For iPad Mini™ 4
!
!
Accessories for
iPad Mini™ 1, 2 or 3 Accessories for
iPad Mini™ 4
E Install the motor handpiece case as
protective case holder*.
4
Connect the App
FOnly for the first use, select your stand-alone mode. See
section 6 Motor handpiece operation for more information.
ANow that your motor
handpiece is fully charged:
Open the application.
DCheck the motor
handpiece serial
number and click on
the corresponding
number on the
iPad® screen.
C Wait a few seconds until the application detects the
motor handpiece.
BAwaken the motor handpiece
by pressing on the multifunction
button once. Press the button
again to activate the Bluetooth®
and confirm that the Bluetooth®
blue LED is blinking.
* The iPad® protective case and the motor
handpiece cover produce static magnetic fields.
F
EWhen the motor handpiece is connected, the icon
changes and the Bluetooth® blue LED switches
from blinking to solid.

X-Smart IQ™ Getting Started Guide
5
Using the App
Access to user
data and logout
Consult and edit
treatment reports
Bluetooth® connection
between the iPad mini™
and the motor handpiece
(signal power)
Motor
handpiece
level battery
Access to the stand-
alone mode selection
(see next page)
Dynamic directions-for-
use
Access to Parameters
(volume, language, etc.),
Statistics and Information
Consult the file library
and create or edit file
sequences
A Home Screen
B C
BStart Treatment
Select your file sequence
(or file system)
Visualize the torque that
was applied to the file
Enable or disable the
auto-reverse function
Motor handpiece
calibration
Adjust torque and
speed parameters
CStart and Record Treatment
Create or select a
patient record number
Visualize the torque that
was applied to the file
Stop recording the
treatment and send a PDF
report by e-mail
Enter treatment data
(notes, working lengths,
last file used, obturation
method)
Select your file sequence
(or file system)

X-Smart IQ™ Getting Started Guide
6
Motor Handpiece operation
Stand-alone
Mode
The stand-alone mode allows you to work without the iPad®
if needed. After the first connection, if you turn on the motor
handpiece without connecting it to the iPad®, it will run with
the stand-alone mode settings.
How to set the stand-alone mode
Help to identify a problem
and verify the status of the
motor handpiece.
A From the application
click on this icon.
B Select between
Continuous or
Reciprocating
stand-alone modes.
Disconnect the motor handpiece.
Motor START/STOP
button.
Battery charge LED
status.
Multifunction button
The multifunction button provides the
following functions:
Connects the motor handpiece to the
application via Bluetooth®.
Awakens the motor handpiece
(the motor handpiece does not turn off, it
automatically switches to stand-by mode).
Advance to the next file during a treatment.
Double press to move to the previous file.
Continuous rotation mode
LED status.
Reciprocating motion mode
LED status.
iPad® / motor
handpiece Bluetooth®
connection LED status.
7
After use
Remove the iPad
mini™ from the
protective case
Full recharge: 6 hours
Autonomy: 16 treatments
Store and charge
the motor
handpiece
A
B
Red On: Low battery.
Red Blinking: Critical low battery.
Green On: Charged.
Green blinking: Device charging.
C
37

X-Smart IQ™ Getting Started Guide
9
Tips & Tricks
10
Additional information
! This document does not replace the
User Manual. Please read carefully the
User Manual that is available from any
page of the application through this
icon and on
www.dentsplymaillefer.com.
! Check regularly for updates on the App
Store®.
! Always check the application
compatibility on
i
before updating
iOS on your iPad®.
If you wish to have a printed version of your
User Manual, we will be happy to send you
a copy (free of charge within 7 calendar
days to any address in the EU). To order,
simply and conveniently send your request
to [e-mail].
You can also find more information
(tutorial videos, tips & tricks, FAQ) on
www.dentsplymaillefer.com.
For support question, please contact your
sales representative.
Press the multifunction button to switch to the next file.
Double press to move to the previous file.
To reset the motor handpiece, press the multifunction button
for 10s.
Multifunction
button
8
Disinfection and cleaning
Please follow the User Manual for complete disinfection,
sterilization and cleaning procedures.
Do not use chloride detergent materials.
Do not use bleach or chloride disinfectant materials.
! Use only a disinfecting solution which is approved for its
efficacy (VAH/DGHM-listing, CE marking, FDA and Health
Canada approval) and in accordance with the User Manual
of the disinfecting solution manufacturer.
Foreword
General
recommendations
!
Only use the
motor handpiece
with a single-
use protective
sleeve (reference
A105800000000
X-SMART iQ
Handpiece
Sleeves).
Pinch 5 fingers together to close an application and return to the
home screen or use the virtual home button. See section 2 iPad®
setup for more information.
Close an
application
Motor handpiece
3
iPad® Protective Case
3

INL/ B EN XSIQ TIP 000 / 00/2017 – created 01/2017
Maillefer Instruments Holding Sàrl
Chemin du Verger 3 - 1338 Ballaigues - Switzerland
Phone: [phone]
[e-mail]
www.dentsplymaillefer.com
0086