Denver LDD-1958MC User manual

Instruction Manual
19"hd ready led tv mpeg-4 dvb-t/c and atv + c.i
& built-in dvd player + usb input + pvr function
Model NO.: LDD-1958MC
www.facebook.com/denverelectronics

Contents
Caution
Safety Information
Accessories
Technical Specification
Product Introduction
Front View
OSD Menu
1. Channel menu
2. Picture menu
3. Sound menu
4. Time menu
6. Setup menu
DVD Operation
1
2
3
3
4
5
4
9-17
9-10
11
12
13
17
24-25
Connections
6-7
Remote Control
8
Basic Operation
Multimedia Operation 18-21
Recording Operation 22-23
gnitoohselbuorTelpmiS
5. Lock menu 14-16
26

Caution
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-
of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling center.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
1
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
directives.

Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
the label on the mains adaptor.
items of equipment.
The power cable/disconnect device shall remain easy to operate/disconnect.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains adaptor from the supply.
- Do not allow water or moisture to enter the TV or mains adaptor. Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
Physical safety
but ensure at least 5cm (2") clearance all around the unit.
care of the remote control, do not drop it or allow it to come into contact with liquids.
stubborn stains, you may use a damp soft cloth with diluted detergent.
2

Accessories
3
Technical Specification
User’s Manual Remote control
* Note: The configuration of the components may look different from the following illustration
Adaptor
- TV System
- Screen Size
- Resolution
- Aerial input
Remote Control
Type
Control distance
Control angle
Batteries
PAL BG/DK/I SECAM BG/DK L/L’
1366x768
0
infrared
5m
30 (horizontal)
2 x 1.5V, size AAA
Converter cableAV Cable
for YPbPr
- Audio output power
- Power Consumption
2x3W
25W
POWER MUTE
REC
EPG
INPUT
MENU EXIT
VOL CH
PICTURE
SETUP
A-B GOTO
D-MENU
TITLE
HOLD SIZE SUBPAGE INDEX
NICAM/A2
TV/TXT CANCEL REVEAL
SOUND SLEEP
FAV
1234
5678
90
DISPLAY
REP
PVR/DVD
SUBTITLE
OK
REC LIST CH/LIST
PRO
SLOW
SCREEN
LAN
INPUT
19 inch(diagonal)

Product Introduction
4
Introduction
Front View
POWER to turn on and off.
INPUT:
MENU:
CH+/-: Press to scan through channels.
VOL+/-:
POWER:
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 300to the left or right side and 200above or below the remote control
window.
off Null
Insert a 12cm disc according
to the silk.
PLAY: Play/Pause DVD program.
EJECT: Load/eject DVD disc.
Remote Control window

Connections
5
Common Interface: CI slot.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
R/L in: Connect them to the audio output terminal of DVD.(shared with YPbPr)
VIDEO: Connect it to video output terminal of DVD.
YPbPr: Connect them to the YPbPr video output terminal of DVD with the converter
cable.
POWER: Connect to the mains adaptor.
USB: USB jack for update, media and PVR.
HDMI1/2: Connect it to the HDMI of DVD or other equipment.
VGA: For PC display.Connect it to the D-Sub 15 pins analog output connector of the PC.
AUDIO:Connect it to the audio output terminal of PC.
SCART: Connect them to the SCART video output terminal of DVD.(used in component source)
Headphone: Connect it to your headphone or other audio equipment.
COAX:Digital coaxial output.
USB
SCART
AUDIO
COAX YPbPr RF

Remote Control
6
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote
control may not work correctly if it is operated out of range or out of angle.
1
2
3
4
5
6
8
7
9
10
11
12
13
14
15
16
17
18
28
29
26
25
24
23
22
21
19
20
27
30
31
32
33
34
35
36
37
INPUT

Remote Control
7
RECALL Return to previous channel.
MUTE
POWER
SUBPAGE
GOTO
CH-List
CH-/CH+
[0-10+]
- Display the channel list(only in DTV).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Press this button to mute or restore sound.
Press this button to switch on the TV when at standby mode or enter standby mode.
Changes the channels up and down.
D.MENU
D.SETUP
REC
Chapter Previous button
Chapter Forward button
PLAY button
PAUSE button
BLUE
NICAM
YELLOW
A-B
The button used in teletext mode.
TEXT
TITLE button
EPG
MENU
Vol-/Vol+
EJECT button
RED
ZOOM button
ASPECT
Display red screen in TELETEXT mode.
GREEN
Display green screen in TELETEXT mode.
To show the Electronic Programmes Guide during no-menu state only.
Press this button to enter the menu screens for various optional adjustable setting.
Display blue screen in TELETEXT.
Press repeatedly to cycle through the NICAM mode.
Display yellow screen in TELETEXT.
INPUT
FAV
REVEAL
INFO
EXIT
SIZE
HOLD
TV/R
ANGLE
OK
INDEX
SLEEP
CANCEL
AUDIO button
REP
-To return to the screen.
-Search button.
-Videotext sub-page button.
Direction button.
-Videotext hidden button
-Repetition button
-TV and Radio Channels.
-Request the index page in teletext mode.
-Segment repetition button
Angle button
- Press OK to Confirm your operartion
Press input to change the singal source.
Favorite program.
To reveal or hide the hidden words.
Display a variety of information about current channel.
SUB button
FAST FORWARD button
FAST REVERSE button
Change the display size in teletext mode.
Freezes a multi-page passage on screen in Teletext mode.
STOP button
Cycles through the LCD TV sleep time.
DVD MENU button.
Subtitle button.
DVD setup button.
Aspect Ratio
Adjust the volume.
Record button
Directly elect a TV channel(10+ only in DVD)
NUM. BUTTON&FUNCTION

button to select the function item, press button to adjust/setup,
Basic Operation
8
Power on/off
1. Connect to the power supply with a power cord and an adaptor.
2. -To turn on the TV
Press POWER button on the TV or remote control.
Press POWER button on the TV or remote control.
-To turn off theTV
Input Source select
Press INPUT button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or button
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Use /
/
button to select the main menu, and press button to enter the submenu.
In the submenu, use /
or press OK button to enter the submenu.
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
Main menu
CHANNEL
PICTURE
SOUND
TIME
LOCK
SETUP
Submenu
(
PICTURE
menu for
example)
Hint---you should operate the OSD menu according to the hint.

OSD Menu
9
1. CHANNEL menu
Description
Auto Tuning
Press OK button to enter the hint menu, and Press /
button to select the Tune Type, then press button, and use
/ / / button to select the Country for the TV, then
press OK button to start auto tuning.
CADTV(DVB-C) / DTV(DVB-T) Manual Tuning
Press OK button to enter the CADTV/DTV
Manual Tuning menu, and press OK button to
start searching.
Press / button to manual search.
ATV Manual Tuning
Press OK button to enter the ATV Manual Tuning menu.
Current CH: Select a Channel for storing the programme.
Color System: Select from PAL and AUTO
Sound System: Select from I, BG, DK
Search:
Fine Tune: Press / button to fine-tune.
AFC: Automatic Frequency control ON/OFF.
Auto Tuning
ATV Manual Tuning
CADTV Manual Tuning
Programme Edit
Signal Information
CI Information
Software Update(OAD) Off
LCN-ON-OFF ON
Tuning Setup
MENU
OK Start Back
MENU EXIT Exit
Back
Move

OSD Menu
10
Programme Edit
Press OK button to enter the Programme Edit menu as the following picture.
Delete: Select a channel and press RED button, then press RED button again, the program will
be deleted.
Move: Select an ATV channel, and press YELLOW button, then you can use and buttons
to change the position of the program, press YELLOW again to confirm the change. Press menu
to exit and it will automatically save the current set.
Skip: Select a channel and press the BLUE button to label the channel, as long as the channel
has a skip label it will be skipped when searching through the channels with the CH+/- buttons.
CI Information
Please contact your “pay perview” provider who can supply a viewing card and cam unit with
instructions for their use.
Signal Information
Display the digital TV-signal information (DTV mode only).
OK FAV FAV MENU BackSelect

OSD Menu
11
2. PICTURE menu
Description
Picture Mode: Choose from Standard, Dynamic,Personal , Mild and Home.
Note: Contrast, Brightness, Colour and sharpness are only available and can be adjusted
in the User mode option in the Picture Mode Settings.
Contrast: Controls the difference between the brightest and darkest regions of the picture.
Brightness: Controls the overall brightness of the picture.
Colour: Control the colour.
Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.
Tint: Controls the tint ( NTSC mode only).
Colour Temperature: Choose from Normal,Cold and Warm.
Noise Reduction: Choose interference noise modes form Off, Low, Middle, High and Default.

OSD Menu
12
3. SOUND menu
Description
Sound Mode: Allows you to select among: Standard, Music, Movie, Sports and Personal.
Treble(Can be adjusted when the sound mode is Personal) :Controls the relative intensity of
higher pitched sounds.
Bass (Can be adjusted when the sound mode is set to Personal): Controls the relative intensity of
lower pitched sounds.
Balance: To adjust the balance of the left and right sound track, or turn off the volume of the
left and right sound track.
Auto Volume: Control the volume of the programme automatically when you turn on the function
by selecting “On”.
SPDIF MODE: Select the spdif mode.
AD Switch: Turn on/off the AD switch.
Audio Delay 20
AD Switch Off

OSD Menu
13
4. TIME menu
Description
Clock: Display the time.
Time Zone: Allows you to select the time zone.
Sleep Timer: Allows you to setup the sleep timer among: 10min, 20min, 30min, 60min, 90min,
120,180,240 and off.
Auto Standby : According to the latest ERP regulation, this unit will switch off itself automatically
if no change in status within the last 4 hours of operation.
OSD Timer: Allows you to select the time for OSD menu displays on the screen.

OSD Menu
14
5. LOCK menu
Description
Lock System: Turn on/off the Lock System function.
Note: You should enter the code to operate the menu.(original code is 0000)
Set Password: Set pin code. If the Pin code has been changed you must enter the present
code.
New : Enter the new password.
Confirm: Enter the new password.

OSD Menu
15
Block Program: You must enter the password to view channels that have been locked. Use
and buttons to select the channel and press the GREEN button on the remote control to
lock the channel.
Parental Guidance: Allows you to select the Parental Guidance mode.
Key Lock: Lock the buttons on the TV set when you turn on the function.
OK Select MENU Back

OSD Menu
16
Source Lock:
L
L
V
A
V
MAX V Y
r
Source Lock
Default Source Off
Default Prog 1
Default Volume Off
Max Volume 100
Import Database
Export Database
Clear Lock
Default Volum: if “Hotel Mode“set to on,selece the default volum when turn on the TV.
Import Database: Only use in usb mode.
Export Database: Only use in usb mode.
DTV
ATV
AV
PC
SCART
YPbPr
DVD
HDMI1
HDMI2
Media

17
OSD Menu
6. SETUP menu
Description
OSD Language: Allows you to select menu language.
TT Language: Allows you to select teletext language.
Audio Language: Allows you to select audio language.
Subtitle Language:Allows you to select subtitle language.
Hearing Impaired: Turn on/off the Hearing Impaired function.
PVR File System: Setup the PVR file system.
Note: The options PVR File System are described on pages.
Aspect Ratio: Choose from 4:3, 16:9, Zoom1, Zoom2.
Blue Screen: Turn on/off the blue screen function when there’s no signal.
First Time Installation: Display the First Time Installation menu.
Reset: Press OK button to restore factory default.
Software update(USB): Allows you to update the software from the USB.
SETUP
Reset
OSD Language English
TT Language West
Audio Languages Danske
Subtitle Language Danske
Hearing Impaired Off
PVR File System
Aspect Ratio Just Scan
Blue Screen Off
First Time Installation
Software update(USB)

HDMI1
HDMI2
Multimedia Operation
18
Press / / / buttons to select and the OK button to activate the file or open folder. Press
OK button to play the files in full screen mode. When in full screen mode press the OK button to
show the option menu on the bottom of the screen or press stop button to return to files.
Note: You can press RED button on the file to delete the file.
Basic Operation
2). Select the file type (mains menu) you want to view, and insert USB device, you will find the
name of the device display on the screen.
3). Press / button to select the the USB device, and press OK button to enter.
1). Press the INPUT button on the remote control to display the input source menu, select Media
source by the / buttons, and press OK button to enter the Multimedia menu seen below.
MAINS MENU: PHOTO MUSIC MOVIE TEXT
Preview
Return to
previous menu
Hints and informations of USB device
Information
EXIT
EXIT