Denver DMB-114HD User manual

Important safety instructions to be kept with the product
Please read attentively
To prevent fire and electric shock, do not expose this receiver to
rain or moisture. In order to avoid any possible risk of electric shock,
never attempt to open the unit. In case of breakdown, reparation
should be made by qualified technicians. No part of this unit should be
re
p
aired b
y
users.
WARNING!
Presence of dangerous tension inside apparatus! Do not open. Risk of electric
shock! No part should be repaired by users. The maintenance of the receiver
should be carried out exclusively by qualified persons.
If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or persons of similar qualification in order to avoid
possible danger.
The product must be installed in accordance with national regulations.
The used batteries must be disposed of safely. Throw them in collection bins provided is
prohibited (inquire after your retailer for more details) in order to protect the environment.
Proper Installation
- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
- Do not place the receiver on top of another device, such as an amplifier. This may lead
to overheating.
- Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
- Place the receiver in a well-ventilated location to prevent accumulation of internal heat.
Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm
to both sides to avoid overheating.
- Do not obstruct any ventilation openings with items such as newspapers, tablecloths,
curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
- The receiver should not be exposed to dripping water or splashing.
- No objects filled with liquids, such as vases, shall be placed on the unit.
- Do not place any objects that might damage your unit near it (e.g. liquid filled objects or
candles).
- Do not place any source of flames such as lit candles on the receiver.
- This receiver is to be used in a temperate climate and should not be used in a tropical
climate.
Electricity Supply
- Please unplug the receiver in case of prolonged non-use.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its
after-sales service, qualified electrician or similar qualifications to those to avoid possible
danger.
- This device must be connected to a 230V ~ 50Hz electrical network.
- The plug must remain readily accessible after the installation of the product.

Welcome Section
Congratulations on choosing to buy a DENVER product. By doing so you now have the
assurance and peace of mind that comes with purchasing a product made by one of the
leading manufactory.
Main features：
zFull HD(1080p)MPEG-4 H.264 DVB-T receiver
zTeletext and eletronic program guide(EPG)
zLCN(Logical Channel Number) ,can choose ON or OFF from Menu
zTimers recording and time shift
zMulti-lingual dvb subtitle and audio track
zFunction via usb port: movie/music/picture playback and PVR(usb sticker or external
hdd with own power supply)
zDigital sound through S/PDIF(Coaxial)output
zSuper low power consumption:standby<0.5W
Automatic Standby: the STB preset to automatically switch from active mode into
standby if 3 hours no interaction and/or channel change from user, with alert message 2
minutes before going into standby. User can choose OFF (turn off this function) or other
hours.
Standby Loop Through
You can select Standby Loop Through On or Off.
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric
and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that
electric and electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the approriate
and designated facility. In this manner you make sure that the batteries are recycled
in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment
and batteries can either be submitted free of charge at recycling stations and other
collection sites, or be collected from the households. Additional information is
available at the technical department of your city.
ALL RIGHTS RESERVED:
COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
Importedby:
InterSalesA/S
Stavneagervej22，8250Egaa,Denmark

1
1. Your receiver ..............................................................................................2
1.1 FRONT PANEL.................................................................................2
1.2 REAR PANEL...................................................................................2
1.3 Remote.............................................................................................3
2. INSTALLATION...........................................................................................4
2.1 Connecting the receiver....................................................................4
2.2 Installation Guide..............................................................................5
3. Basic Operation .........................................................................................5
3.1 Program Organizer ...........................................................................5
3.2 Timers...............................................................................................5
3.3 Installation ........................................................................................6
3.4 System Setup ...................................................................................6
3.5 Tools.................................................................................................7
3.6 Record ..............................................................................................7
3.7 Mulimeida .........................................................................................8
3.8 Audio Language................................................................................8
3.9 TV Channel and radio Channel list ...................................................8
3.10 Favourite Channel ..........................................................................8
3.11 EPG (Electronic program guide).....................................................8

2
1. Your receiver
1.1 FRONT PANEL
1. Power: Switch between Standby mode and active mode.
2. on/off: Power lamp, red color in Standby mode, green color in active mode.
3. IR sensor:Receives the remote control signal.
1.2 REAR PANEL
1. ANT IN: To connect the antenna.
2. LOOP OUT: To connect an extra receiver or TV set.
3. USB: It is used for playing wma,m4a, aac, JPEG,BMP,PNG,AVI, XVID,MKV and USB
PVR(USB stickers, external hdd with own power supply and FAT32 format).
USB harddisc on products with PVR function:
We recommend using a hard disc with OWN power supply on this unit. This is to ensure
that it has enough power to work properly.
You can buy many hard discs without power supply, but our experience is that they need
too much power to work stable. MAXIMUM power for hard discs without power supply is
500mAh.. If they use more than this, they will fail when recording.
4. HDMI: Connecting to the HDMI input on the TV set.
5. S/PDIF: Digital audio signal output.
6. TV SCART: Use SCART cable to conect this connector with TV set for CVBS and
analog stereo audio output. Also you can connect it to your video recorder,the video
signal will be looped through your receiver to your TV set.
7. Power Cord

3
1.3 Remote
: Switch between operation and standby modes.
: Press to temporarily cut off the sound.
0-9: Enter number or select a channel number to watch.
RCL: Switches to Last channel viewed.
AV: Toggle between TV and AV mode.
TV/R: Switch between TV and Radio mode.
MENU: Displays the main menu.
EXIT: Return to the previous menu or escape from the item
OK: Confirm. When playback pvr file, press two times to have
full screen showing.
: Move cursor up/down/left/right, page up/down,
Volume +/-.Chanel +/-
FAV: Press to display the TV favorite list.
EPG: Shows the EPG (Electronic Program Guide) only
when menu is off.
V+/V-: Volume+/-.
AUDIO: Display the Audio Select window.
INFO: Shows information of the current channel.
ZOOM: Magnify the picture;entering pvr files list
P+/P-: Page up or down in menu list.
RCL: Switches to Last channel viewed.
PAUSE: Pause in multimedia playback & timeshift
SUB:Show the list of subtitled languages the current
channel supports.
TEXT: Shows current service’s Teletext on OSD.
||: Pause.
: Play previous item.
: Play next item.
●: Records a live program.push it again to insert recording time when Record Time Period
set ON in Menu
：Play in multimedia playback & timeshift.
: Slow playing.
: Fast playing.
■：Stop.
Colored buttons (RED, GREEN, YELLOW, BLUE): special function keys, there is function
description in menu bottom side, different functions in different menu option.
NOTE: GOTO function---under menu of Music, Movie, PVR, press blue color button, show GOTO on
menu, then input time which you want.

4
2. INSTALLATION
2.1 Connecting the receiver
Connect the antenna to the receiver.
Connect the receiver to TV set.
Connect the receiver to the speaker.

5
2.2 Installation Guide
After all connections have been made properly,
switch on TV and make sure the receiver is
connected to the Main Power. If you are using the
receiver for the first time or restored to Factory
Default, the Installation Guide menu will appear on
your TV screen.
(1) Select [Country] and press RIGHT/LEFT key
to select your country of residence
(2) Select [OSD Language] and press
RIGHT/LEFT key to select an language
(3) Select [Display Mode] and press
RIGHT/LEFT key to select Display Mode
(4) Select [Aspect Mode] and press RIGHT or
OK key to select Aspect Mode
(5) Select [install ] to start Auto scan
3. Basic Operation
3.1 Program Organizer
To access the Menu, press the MENU button
and select [Program Organizer]. The Menu provides
options to adjust the Program Manage Settings.
Select an option and press OK or RIGHT to adjust
that setting. Press the EXIT button to exit the Menu.
3.1.1 Channel Manager
To edit your program preferences (lock, skip, favourite, rename move or delete), you will
need to enter the Channel Manager Menu. This Menu requires a password to access. Enter the
default password '0000'.
3.1.2 Channel Sort
You can sort channels by LCN, ONID, Service Name or Service ID.
LCN can be set ON or OFF.
3.1.3 Delete All
You can delete all channels. This Menu requires a password to access. Enter the default
password '0000'.
3.2 Timers
In this menu, you can add the timers, edit the timers and delete the timers.
Add
Press RED button to enter Event Add menu, in this menu, you can select the channel
number which you want to record, set the start date, start time, end time and select the repeat
mode(Once, Daily or Weekly), then set the mode to Record, press Ok to save the timer. This
channel will be recorded automatically by the timer.
Edit
Press GREEN button to enter Edit menu , in this menu, you can select the channel number
which you want to record, set the start date, start time, end time and select the repeat
mode(Once, Daily or Weekly), then set the mode to Record, press Ok to save the timer. This
channel will be recorded automatically by the timer

6
Delete
Press BLUE button to delete the book item.
3.3 Installation
To access the menu, press MENU and select
[Installation]. The Menu provides options to adjust
the Channel Search settings. Select an option and
press RIGHT/LEFT to adjust the setting. Press EXIT
to exit the Menu.
3.3.1 Search Setup
(1) Country
Select your country of residence.
(2) Antenna power
Enable Antenna Power if an external active antenna is connected.
3.3.2 Auto Search
Search and install all channels automatically. This option overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT.
3.3.3 Manual Search
Install new channels manually. This option adds new channels without changing the current
channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels
If a channel is found, it is saved and added to the channels list. If channels can t be found,
then exit the menu.
3.4 System Setup
To access the menu, press MENU and select
[System Setup]. The menu provides options to adjust
the system settings.
Press the UP/DOWN key to select an option and
press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the Menu.
(1) Language Setting
The menu provides options to adjust the OSD
Language, Audio Language, Subtitle Language,
(2) TV Setting
TV Mode
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV
Screen Mode
You must set the display format to either4:3 Full, 4:3 Pan& Scan, 4:3 Letter Box, 16:9
Wide Screen or Auto to get the maximum display when watching TV.
SCART Output
CVBS/RGB, analog stereo audio output
HDMI Output
If the video does not appear correctly, change the setting. This setting is to match the most
common setting for HDMI.

7
(3)Audio Setting
Digital Audio: PCM/RAW HDMI ON/ RAW HDMI OFF /OFF
(4) Time Setting
Time offset
Select auto or manual for GMT offset adjustments.
Country Region
Select the Country Region when [Time Offset] is set to Auto.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
(5) Auto standby
The STB preset to automatically switch from active mode into standby if 3 hours no
interaction and/or channel change from user, with alert message 2 minutes before going into
standby. User can choose OFF (turn off this function) or other hours.
(6) Parental Guidance
You can restrict access to channels that are unsuitable for children. To restrict/lock the
channel you will need to enter either the default password '0000' or your own password.
(7) Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.
In Main Menu select [Restore Factory Default] and press OK or RIGHT to select. Enter your
password or the default password '000000' and press OK to confirm. This option will delete all
preset channels and settings.
3.5 Tools
(1) Information
View model, hardware and software information.
(2) Change Password
Set or change the password for locked programs.
Enter your old password or the default password
'0000'. You will then be asked to enter your new
password. To confirm re-enter your new password.
Once it is confirmed, press EXIT to exit the Menu.
(3) USB update
You can upgrade SW via the USB device.
3.6 Record
(1) Video List
To play your record.
(2) USB device information
Format , File System, Free Space/total Space.
(2) Record Setup
Disk: Select the current disk.
Timeshift Size 0.5GB-4GB.Plus 0.5 each time.
(3) Record Setup: off,1hour-12 hour.

8
3.7 Mulimeida
This menu contains six functions: picture,
music, moive, Photo Configure, Movie Configure and
Remote USB device.
3.7.1 Picture,music,movie
You can play music, view the photo, movie and
PVR.
Multimedia player feature also has been integrated on the receiver. Press USB key to display
multimedia player window. You could show your preference photo, playing music and movie on
multimedia player. Known supported file were illustration below. FAT32 file system could be
supported at the moment.
Supported file
Photo JPEG, BMP, PNG
Music *.wma,*.m4a, *.aac,*.mp3,
Movie .avi, *.mpeg, *.dat, *.vob, *.XviD, *.mov, *.mkv, *.ts, *.trp, motion jpeg,
*.mp4(GMC not supported)
3.7.2 Photo Configure
You can set Slide Time, Slide Mode and Aspect Ration.
3.7.3 Movie Configure
In this menu, you can set Subtitle Specific, Subtitle BG and Subtitle FontColor.
3.8 Audio Language
The program might have multilingual audio language and the audio broadcast on different
audio mode such as Stereo, Left or Right. All the available audio languages will display on the
audio track windows while you press AUDIO key. The screenshot is illustrated below. If there is
no audio output after you select the audio language, it indicates that there is no audio on the
current audio mode, so you have to select preferable audio mode.
3.9 TV Channel and radio Channel list
Press OK key to display all TV channel or all Radio channel. Follow the help information at
the bottom of the window to select preference channel.
3.10 Favourite Channel
You can add preference channels to favourite’s channel list on the channel edit window.
Press FAV key to launch your favourite’s channel list.
3.11 EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven days in advance
for every tuned channel. Press the EPG button on the Remote Control to access guide.