Design Within Reach Aero Low Shelving Installation guide

1 | WWW. D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | DESIGN WITHIN REACH STUDIOS
Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Care Instructions
Regularly dust wood with a damp
soft cloth. Clean occasionally with
a soft cloth dampened with a
solution of mild detergent and
lukewarm water. Dry completely
with a clean towel.
Low Shelving

x 1
4mm Allen wrench
x 8
25mm bolt
x 12
Cone screw
x 12
12mm bolt
(bottom shelf only)
2 | WWW. D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | DESIGN WITHIN REACH STUDIOS
Hardware Checklist
Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach
x 1
Wrench

Lay top shelf on a soft surface, top down or on its side.
Attach uprights using six cone screws as shown. Repeat with
other uprights.
1.
Align and attach middle shelf on previously installed
uprights using four 25mm bolts as shown.
2.
3 | WWW. D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | DESIGN WITHIN REACH STUDIOS
Top Shelf
Middle Shelf
Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach

4 | WWW. D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | DESIGN WITHIN REACH STUDIOS
Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach
Top Shelf
Middle Shelf
Bottom Shelf
Attach uprights to bottom of middle shelf using
six cone screws as shown.
3.
Align and attach bottom shelf to uprights installed in
previous step using four 25mm bolts as shown.
4.

5 | WWW. D W R . C O M | 1 . 8 0 0 . 9 4 4 . 2 2 3 3 | DESIGN WITHIN REACH STUDIOS
Aero Low Shelving
Designed by Gabriel Tan for Design Within Reach
Attach leg bracket to bottom shelf using twelve 12mm bolts as shown.
Repeat with second leg bracket.
5.
Top Shelf
Middle Shelf
Bottom Shelf
Loosen leveling legs slightly with wrench if necessary to ensure they can be
easily adjusted once the console is upright and in position.
6.