Design Within Reach Raleigh Bed User manual

1 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Raleigh Bed
Designed by Jeffrey Bernett, Nicholas Dodziuk
and Christopher Skodi
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Wood Care
Dust frequently with a damp cloth,
then immediately wipe dry. Never
use solvents, harsh chemicals
or abrasives on any finishes. Clean
as necessary with a clean cloth
and a solution of cool water and
mild detergent.
Fabric Care
Vacuum regularly to remove dust.
Spot clean with a solution of cool
water and mild detergent. Never use
solvents of any kind.

2 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Raleigh Bed
Hardware Checklist
2 X THREADED RODS 2 X HEX NUTS
6 X LONG BOLTS 6 X SHORT BOLTS
30 X WOOD SCREWS FOR FULL
32 X WOOD SCREWS FOR QUEEN OR KING
34 X WOOD SCREWS FOR CAL. KING
1 X ALLEN WRENCH
1 X FLAT WRENCH
ELECTRIC DRILL (REQUIRED TOOL)

3 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
4 X LONG BOLTS
Attach footboard to side rails
using two long bolts.
2.
Attach side rails to headboard rail
using four long bolts.
1.
Raleigh Bed
2 X LONG BOLTS

4 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Attach legs to center rail, then connect to headboard
and footboard using two short bolts. Raise or lower
adjustable feet to level bed as necessary.
4.
Install two threaded rods into headboard legs as shown, then
attach headboard by pushing threaded rods through side rails
and securing with two hex nuts. Tighten with flat wrench.
3.
Raleigh Bed
2 X THREADED RODS
2 X HEX NUTS FLAT WRENCH
2 X SHORT BOLTS

5 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Attach one cushion by aligning clip on back and pins
on bottom with corresponding parts on bed frame.
Push cushion toward center of frame to lock in place,
then secure with two short bolts.
5.
Raleigh Bed
2 X SHORT BOLTS

6 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
7. Lay slats in place as shown and secure
with wood screws using an electric drill.
Raleigh Bed
2 X WOOD SCREWS
IN EACH SLAT
ELECTRIC DRILL
6. Repeat with second cushion. First cushion must be
completely installed before installing second cushion.
2 X SHORT BOLTS