Design Within Reach Cove Bed 100083918 User manual

1 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Cove Bed
Designed by Nathan Yong
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Wood Care
Dust with a slightly damp, soft,
lint-free cloth. Wipe dry with a
dry, soft cloth in the direction of
the wood grain. Do not use aerosol
cleaners or polishes. Also, do not
use polishes containing waxes
or abrasives, or polishes that are
oil-based.

2 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Cove Bed
Hardware Checklist
ALLEN WRENCH
2 X LONG BOLT
40 X SHORT BOLTS FOR TWIN
80 X SHORT BOLTS FOR FULL
84 X SHORT BOLTS FOR QUEEN OR KING 8 X MACHINE SCREWS
2 X L-BRACKET MALLET BLOCK
ELECTRIC DRILL (OPTIONAL TOOL)MALLET (REQUIRED TOOL)

3 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Place mallet block over side rail near bedpost,
then hit with mallet to firmly lock side rail into
place. Repeat with other three corners.
2.
Attach side rails to headboard and footboard
by connecting hooked brackets into
corresponding slots on bedposts as shown.
1.
Cove Bed
MALLET

4 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Attach legs to center rail with long bolts as shown, if applicable.
Attach L-brackets to headboard and footboard with machine screws,
then rest center rail on brackets and secure with machine screws.
Twin bed does not have center-rail legs.
3. Please Note
Cove Bed
LONG BOLTS
ALLEN WRENCH
MACHINE SCREWS

5 | WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS
Install slats and secure with short bolts
and Allen wrench or drill.
4.
Cove Bed
SHORT BOLTS ALLEN WRENCH
ELECTRIC DRILL