Design Within Reach Nest Storage Bed in Fabric User manual

WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 1
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
General Assembly Instructions
• Assembly requires two people and 1–2 hours.
• Assemble bed as near as possible to final resting area.
• Identify all parts and hardware before beginning assembly.
• Retain packaging until bed is fully assembled to ensure no
fittings or components are accidentally discarded.
• Make sure assembly area is clean and level.

D
E
J
A
C
B
I
Headboard
A
Footboard
D
BSide rails C
K
Plastic feet
E
GSlat decks H
Headboard bar
I
Footboard bar
J
Leather handle
K
Slipcover (not illustrated)
F
G
H
Wrench x 1
Medium bolt x 16
M8 x 25mm (1")
Long bolt x 8
M8 x 50mm (2")
Extra-long bolt x 4
M8 x 70mm (2.75")
Nut x 14
Socket wrench x 1
Allen wrench x 2
Washer x 16
Short bolt x 3
M8 x 17mm (5 / 8")
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 2
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Exterior Frame Checklist
Exterior Frame Hardware, Drawn Actual Size

N
NLong support bars O
Short support barsM
Center foot
L
Storage panelsP
O
M
P
L
Short bolt x 3
Medium bolt x 12
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 3
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Interior Frame Checklist
Interior Frame Hardware, Drawn Full Size

C
B
A
Medium bolt x 8
4
C
B
D
Medium bolt x 8
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 4
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Attach footboard to side rails using medium bolts.
Be sure plastic caps in corner brackets are facing up.
2.
Attach side rails to headboard using medium bolts.
Be sure plastic caps in corner brackets are facing up.
1.

E
E
E
E
WIDER CROSS BRACE
OF CORNER BRACKET
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 5
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Turn bed frame assembly on its side. Screw feet into wider cross braces
of corner brackets, and tip bed frame assembly back down.
3.

F
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 6
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Open zipper and fit slipcover down slightly over headboard, just
enough to hold it in place, then position remaining slipcover loosely
along side rails and footboard.
Working from footboard, fit slipcover snugly to corners, then
remove fabric backing from velcro a little at a time and press into
place along top and bottom edges of footboard. Slide slipcover
down on headboard completely, then return to fit slipcover over
side rails working from footboard to headboard, smoothing and
attaching velcro as you go. Close zipper on headboard, and smooth
and attach slipcover.
5.4.

G
H
Extra-long bolt x 4
Nut x 4 Washer x 8
G
H
G
H
Extra-long bolt x 4
Nut x 4 Washer x 8
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 7
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Assemble mattress frame by placing slat decks side by side with
slats curving downward and flanged edges to the outsides. Secure
using extra-long bolts, nuts and washers as shown. Loosely tighten
in preparation for final tightening later.
6.

10
Long bolt x 4
Nut x 4
Washer x 4 K
J
K
J
I
I
Long bolt x 4
Nut x 4
Washer x 4
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 8
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With slats still curving downward, locate and attach headboard bar
using long bolts, nuts and washers as shown.
7.
Attach footboard bar and leather handle to mattress frame
using long bolts, nuts and washers as shown. Install handle with
“Design Within Reach” facing outward and upside down.
8.

Medium bolt x 8
Flip mattress frame into position with slats curving upward, then
lower into bed frame as shown. Reaching between slats, attach hinge
assembly to side rails using medium bolts.
10.
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 9
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With headboard bar, footboard bar and handle attached,
firmly tighten nuts and bolts holding mattress frame together.
9.

Nut x 2
L
M
M
Short bolt x 2
Connect two short support bars to center foot using short bolts.
14.
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 10
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
With mattress frame raised and held up by assistant, attach
pistons to hinge assembly using nuts as shown.
13.

N
O
N O
Short bolt x 1
Medium bolt x 2
L / M
Medium bolt x 2
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 11
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.
Attach short-bar assembly to side rails using medium bolts.
15.
Join two support bars at center foot and secure with short bolt.
Attach long support bars to footboard and headboard using medium bolts.
16.

P
P
P
P
Place storage panels inside, ensuring all sit flat.
Mattress frame will not stay fully closed until fitted with your mattress.
17.
Please Note
WWW.DWR.COM | 1.800.944.2233 | DESIGN WITHIN REACH STUDIOS 12
Nest Storage Bed in Fabric
Designed by Niels Bendtsen
Customer Service:
1.800.944.2233 inside the U.S.
1.203.614.0600 outside the U.S.