DFI BPC370-BW User manual

1
BPC370-BW Installation Guide
Package Contents
• One 37" bar-type panel PC
• 1 DVD disk includes:
-Manual
DFI reserves the right to change the specifications at any time prior to
the product's release. For the latest revision and more details of the
installation procedure, please refer to the user's manual on the website.
www.dfi.com

2
Panel
Left View
Right View
AC-in
VGA
USB 3.0
LAN 1/LAN 2
Antenna hole COM 1
(RS232)
Power button
DP++
COM 2
(RS232)

3
Removing the Chassis Cover
1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 12 mounting screws on the rear side of the system are used to
secure the cover to the chassis. Remove these screws and put them in a
safe place for later use.
4. Lift the cover up to open the system.
5. The Mini PCIe slots are on the front side and the SODIMM slot are on
the rear side of the system board.
Mini PCIe and mSATA

4
Installing a Mini PCIe Card
Note:
The system also has a half-size Mini PCIe slot that uses PCIe and USB signals.
The system board is equipped with 2 Mini PCIe slots: one full-size and one
half-size slots. Here we will demonstrate the installation of the full-size Mini
PCIe card with the mSATA interface.
1. Grasp the Mini PCIe card by its edges and align the notch in the
connector of the PCIe card with the notch in the connector on the
system board.
2. Push the Mini PCIe card down and use the provided mounting screws to
secure the card on the system board.
Mounting screw
Mini PCIe card
half-size Mini PCIe slot

5
The VESA-mount specifications for this device is 400 x 200 (mm).
Please use a compatible VESA-mount kit that can sustain the weight
and size of this device. Please refer to the following illustration for
screw-hole positions.
Mounting the Device
Vesa mount
400
200

6
Board Layout and Jumper Settings
TOP BOTTOM
DDR3L SODIMM
Intel
Pentium
Celeron
Standby
Power LED
SIM
Realtek
ALC888
PTN3460
SMSC
USB2517
RT8175A
Fintek
F81439
Fintek
F81439
Fintek
F81437
Fintek
F81437
DC-in
4-pin Vertical Type (optional)
4-pin
Right Angle
LAN 1
LAN 2
USB 0-1 USB 3.0
USB 2-3 USB 3.0
VGA
Mini PCIe
mSATA
SPI Flash
BIOS
1
Auto Power-on
Select (JP6)
2
1
5
6
Front Panel
1
5
6
2
21
39
40
LVDS LCD
Panel
1
SATA 0
1
SATA Power
SATA 3.0
1
System Fan
1
2
Battery
2
1
20
19
2
1
20
19
COM 1/COM 2 COM 3/COM 4
1
Clear CMOS
Data (JP7)
1
1
1
ON
2
LVDS Channel and
bpp Select (SW2)
2
1
10
9
Front Audio
1
Backlight Power
Select (JP10)
1
5
6
2
SMBus
1
9
10
2
Digital I/O
USB 4-5
12
910
USB 2.0
1
DP++
LCD/Inverter
Power
Panel Power
Select (JP8)
ME Disable
Chassis Intrusion
Intel
WGI211AT
Intel
WGI211AT
Nuvoton
NCT6106D
Chrontel
CH7517
RT8175A
RT8175A RT5041A
Panel Power Select JP8
+12V (default) 1-2 On
+5V 3-4 On
+3.3V 5-6 On
Auto Power-on Select JP6
Power-on via power button
(default)
1-2 On
Power-on via AC power 2-3 On
Backlight Power Select JP10
+3.3V (default) 1-2 On
+5V 2-3 On
Switch 2 1 On 1 Off2 On 2 Off
LVDS
Channel
and bpp
Select
Single
LVDS Dual LVDS VESA (24bpp) JEIDA or VESA (18bpp)
Clear CMOS Data JP7
Normal (default) 1-2 On
Clear CMOS Data 2-3 On