Quick Start Guide
ConnectPort™X4
with CDMA, 1xRTT, EVDO Rev. 0,
or EVDO Rev. A provisioning
1Verify kit contents
© 2007 Digi International, Inc.
Digi, Digi International, Inc., Digi Connect, ConnectPort and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
ConnectPort X4
Power Supply
dConnect power supply
b
a
c
2Connect hardware
cConnect Ethernet cross-over cable to a PC and the
Ethernet port located directly next to the power jack
ZigBee
Antenna
d
Cellular Antennas
may be sold
separately
b
3Congure your
cellular settings
aOpen your web browser and enter the IP
address 192.168.1.1 in the URL address bar
bFrom the web interface, under Conguration,
click “Mobile.” Enter your service provider name
and connection parameters and click “Apply.”
For CDMA carriers that support Over-the-Air
provisioning, select “Click Here” to automatically
provision the device, then click “Apply.”
Your device is now congured. If you would
like to verify connections go to steps 4 and 5
a
b
Disconnect the Ethernet cross-over cable and reconnect it. This will re-establish the Ethernet
connection by assigning a new IP address through the DHCP server
To verify your Internet connection, enter a website of your choice (e.g. www.digi.com) in the URL
address bar of your browser and click “enter.” Connecting to a website indicates the connection
is working
For additional information about your cellular connection, click System Information > Mobile or
reference the User’s Guide provided on the Digi support site (www.digi.com/support/)
5Validate Internet connection
4Discover ZigBee Mesh Network
a
NOTE: If you have diculty discovering your device,
make sure your host computer is set up to obtain IP
addresses sutomatically (DHCP server is enabled by
default on the device). Also ensure all rewall
software is temporarily disabled
b
Under Administration, click System Information > Mesh Network
Click Discover Mesh Network. You should see the devices on your Mesh network
90000871_B
Ethernet
cross-over cable
bConnect cellular antennas
aConnect ZigBee antenna
