Digisol DH-bg1100n User manual

DG-BG1100N
802.11N 150MBPS SINGLE PORT WIRELESS ADSL2/2+
ROUTER
User Manual
V1.0
2013-12-12
As our products undergo continuous development the specifications are subject to change without prior notice

DG-BG1100N User Manual
2
Index
1Product Information ..............................................................................................4
1.1 Safety Precautions ..................................................................................4
1.2 Package Contents ...................................................................................5
1.3 Features...................................................................................................5
1.4 System Requirements .............................................................................6
1.5 LEDs and Interfaces ................................................................................7
2Hardware Installation..........................................................................................10
2.1 Software Installation ..............................................................................11
2.2 PC Network Configuration.....................................................................21
3Accessing the Internet........................................................................................23
3.1 Accessing the Internet by Wireless Connection...................................23
3.2 Accessing the Internet in Bridge Mode.................................................25
4Web Configuration..............................................................................................26
4.1 Access the Router .................................................................................26
4.1.1 Status.....................................................................................27
4.1.2 Device Info ............................................................................27
4.1.3 System Log ...........................................................................28
4.1.4 Statistics ................................................................................28
4.2 Quick Start .............................................................................................30
4.3 Interface Setup ......................................................................................40
4.3.1 Internet ..................................................................................40
4.3.2 LAN........................................................................................46
4.3.3 Wireless.................................................................................50
4.4 Advanced Setup ....................................................................................53
4.4.1 Firewall..................................................................................53
4.4.2 Routing ..................................................................................53
4.4.3 NAT........................................................................................55
4.4.4 VLAN .....................................................................................59
4.4.5 ADSL.....................................................................................62
4.5 Access Management.............................................................................63
4.5.1 ACL........................................................................................63
4.5.2 Filter.......................................................................................64

DG-BG1100N User Manual
3
4.5.3 SNMP ....................................................................................67
4.5.4 UPnP .....................................................................................68
4.5.5 DDNS ....................................................................................69
4.5.6 CWMP...................................................................................70
4.6 Maintenance ..........................................................................................71
4.6.1 Administration .......................................................................71
4.6.2 Time Zone .............................................................................72
4.6.3 Firmware ...............................................................................73
4.6.4 SysRestart.............................................................................74
4.6.5 Diagnostics............................................................................75
4.7 Troubleshooting.....................................................................................76

DG-BG1100N User Manual
4
1 Product Information
The DG-BG1100N device is an ADSL access device that supports multiple line modes. It
provides one 10/100Base-T Ethernet interface at the user end. The device provides
high-speed ADSL broadband connection and supports wireless network access to the Internet
or Intranet for high-end users such as net cafes and office users. The device provides high
performance access to the Internet, downlink up to 24 Mbps and uplink up to 1 Mbps.
1.1 Safety Precautions
Take the following instructions to prevent the device from risks and damage caused by fire or
electric power.
•Use the type of power marked by the volume label.
•Use the power adapter in the device package.
•Pay attention to the power load of the outlet or prolonged lines.An overburden power
outlet or damaged lines and plugs may cause electric shock or fire accident. Check
the power cords regularly. If you find any damage, replace it at once.
•Proper space left for heat dissipation is necessary to avoid damage caused by
overheating the device. The long and thin holes on the device are designed for heat
dissipation to ensure that the device works normally. Do not cover these heat
dissipation holes.
•Do not put this device close to a place where a heat source exists or high temperature
occurs. Avoid the device from direct sunshine.
•Do not put this device close to a place where it is over damp or watery. Do not spill any
fluid on this device.
•Do not connect this device to PCs or electronic products, unless our engineer or your
broadband provider instructs you to do this, because any wrong connection may
cause power or fire risk.
•Do not place this device on an unstable surface or support.

DG-BG1100N User Manual
5
1.2 Package Contents
Before you start using this router, please check if there’s anything missing in the package, and
contact your dealer of purchase to claim for missing items:
•1 x ADSL Wireless router
•2 x Telephone cables (RJ11)
•1 x Ethernet cable (RJ45)
•1 x External ADSL splitter
•1 x Power adapter (DC12V 0.5A, EU)
•Installation Guide CD ( includes user manual, QIG & Utility)
•Quick Installation Guide
1.3 Features
The device supports the following features:
•Various line modes
•Wireless network access
•External PPPoE dial-up access
•Internal PPPoE/PPPoAdial-up access
•1483Bridged/1483Routed with dynamic IP or static IP
•Multiple PVCs (the number of PVCs support is eight)
•DHCP server/relay
•Static route
•Network Address Translation(NAT)
•DMZ
•Virtual Server
•Universal plug and play (UPnP)
•Dynamic Domain Name Server(DDNS)
•One-level password and username
•Network Time Protocol(NTP)
•Firmware upgrading through Web, TFTP, or FTP
•Resetting to the factory defaults through Reset button or Web
•Diagnostic test
•Web interface

DG-BG1100N User Manual
6
•Telnet CLI
•IP/MAC/URL Filter
•Application layer service
•QOS
•Port binding
1.4 System Requirements
Recommended system requirements are as follows:
•A10/100 base-T Ethernet card is installed on your PC.
•A hub or Switch. (To connect several PCs through one of the Ethernet interfaces on the
device.)
•Operating system: Windows 98 SE, Windows 2000, Windows ME, Windows XP,
Windows Vista, Windows 7.
•Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or higher.

DG-BG1100N User Manual
7
1.5 LEDs and Interfaces
Top Panel
The following table describes the LEDs of the device:
LEDs Color Status Description
Power Green On Power is ON.
Off Power is OFF.
Red On The device is initializing or initialization has
failed.
DSL Green On DSL physical link is up.
Blinking ADSL handshaking process is on or ADSL line
unplugged.
Internet Green On Internet connection is established.
Blinking Data is beihng transmitted or received.
Off Set as bridge mode.
Red On PPPoE/PPPoA user name-password not set or
is wrong.
LAN Green On PC is connected to the LAN port.
Blinking Data is being transmitted or received.
Off PC is unplugged / Not connected.
WLAN Green On Wireless is enabled.
Blinking Data is being transmitted or received.
Off Wireless is not enabled.
WPS Green Blinking WPS negotiation is enabled, waiting for the
wireless clients.
Off WPS negotiation is not enabled on the device.

DG-BG1100N User Manual
8
Rear Panel
The following table describes the interfaces of the device:
Items Description
On/Off Power switch. Power on or off the device.
Power Power interface, for connecting to the power adapter of DC 12 V, 0.5 A, EU.
LAN RJ-45 interface, for connecting to the Ethernet interface of PC or other
Ethernet devices through Ethernet cable.
DSL RJ-11 interface, for connecting to the ADSL interface or a splitter through the
telephone cable.

DG-BG1100N User Manual
9
Side Panel
Items Description
WPS Press the button to enable WPS.
WLAN Press the button to enable WLAN.
Reset
Reset to the factory defaults. Keep the device powered on, then
insert a paper clip in to the hole, press and hold for over 3 seconds.
The configuration will be reset to the factorydefaults.

DG-BG1100N User Manual
10
2 Hardware Installation
The following figure shows the application diagram for the connection of the router, PC, splitter
and the telephone sets, when no telephone set is placed before the splitter.
Step 1 Connect the DSL interface of the device and the Modem interface of the splitter
through a telephone cable. Connect the phone to the Phone interface of the splitter
through a cable. Connect the incoming line to the Line interface of the splitter.
The splitter has three interfaces:
•Line: Connect to a wall phone jack (RJ-11 jack).
•Modem: Connect to the ADSL jack of the device.
•Phone: Connect to a telephone set.
Step 2 Connect the LAN interface of the device to the network card of the PC through an
Ethernet cable (MDI/MDIX).
Note: Use twisted-pair cables to connect with the hub or switch.
Step 3 Plug one end of the power adapter to the wall outlet and connect the other end to
the Power interface of the device.

DG-BG1100N User Manual
11
2.1 Software Installation
Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.
Explore the CD and execute the “DG-BG1100N.EXE” file. Screen given below will be
displayed. Click ‘Start’ to continue.

DG-BG1100N User Manual
12
Connect the ADSL line to the router. Click ‘Next’.
Connect the power adapter to the AC Mains and the other end to the power interface on
the router. Push the power button on the router to power up the device.Click ‘Next’.

DG-BG1100N User Manual
13
Connect the Ethernet interface on the router to the LAN card on the computer using the
Ethernet cable. Click ‘Next’.
After powering up the router, verify the status of the LED indicators on the front panel of
the router. Click ‘Next’.

DG-BG1100N User Manual
14
Please select your ‘Country’ and ADSLservice provider. VPI and VCI values will auto fill.
Select the network protocol for WAN interface. Click ‘Next’.

DG-BG1100N User Manual
15
All the utility installation steps till here are the common steps to be followed for the modes.
Following are the steps for configuring PPPoE connection
Enter the username and password provided by your ISP. Click ‘Next’.
:
Configure a wireless name (SSID) for your router. Click ‘Next’.

DG-BG1100N User Manual
16
Configure the wireless security for your router. Click ‘Next’.
Ascreen with the summary of wireless setting will appear as shown below. Click ‘Next’.

DG-BG1100N User Manual
17
Click on ‘Next’, the following screen will appear.
Once the connection is established, the router connection status will appear.

DG-BG1100N User Manual
18
To configure the router in bridge mode select “Bridging” option. Click ‘Next’.
Bridging Mode:
Configure a wireless name (SSID) for your router. Click ‘Next’.

DG-BG1100N User Manual
19
Configure the wireless security for your router. Click ‘Next’.
Ascreen with the summary of wireless setting will appear as shown below.

DG-BG1100N User Manual
20
Click on ‘Next’ the following screen will appear.
Click on ‘Finish’ to complete the configuration of the router in Bridge mode.